OPEN-SMART USB zu ESP8266 ESP-01S LINK V2.0 Wi-Fi-Adaptermodul mit Treiber 2104
Ein Teil der Rezension wurde automatisch übersetzt.
Gut angekommen. Die ersten Eindrücke waren lauwarm, wie das Brett tattig aussieht, aber es war nur ungewaschener Fluss. Es gibt eine praktische Pfeil ti unterstützen Sie in immer die ESP01s in der richtigen Weise herum eingesteckt, und seien Sie vorsichtig, es ist sehr leicht, falsch zu bekommen. Um es als Programer für die Arduino IDE zu verwenden, müssen Sie nur einen einfachen Umschalter zwischen IO0 und GND hinzufügen, um es in den Flash-Modus zu bringen. Ganz einfach.
I plan to use this adapter for ESP 8266 - 01. It looks OK, but there are missing any instructions. I have found driver on internet, so the driver in my PC is OK. Adapter itself could be OK, there is 5V to 3.3V conversion, but I was not able to upload software to ESP 01 board. Missing switch GPIO0 to GND (for software upload). My ESP01 module was not S type, so maybe this was a problem.
....
While plug using 3 different item ESP8266 the unit overheat need to remove quick
For this Programmer the ESP-Module has to be placed outwards. For me the standard DTR/CTS control for programming is not working using Arduino IDE! First of all I had to solder a pullup resistor between VCC and the CD_PD pin. To put the ESP-01 in programming mode GPIO has to be pulled to ground (soldered a jumper to the pin) followed by pressing the Reset button. For Nral opreation the Jumper should be removed again.
Ottimo prodotto funziona correttamente
In guten Verhältnissen angekommen
Macht den Job
Nützlich für esp01s
GUTE PUNKTE