Makkelijk voor lagere spanningen te regelen , ideaal voor de Electronic deze warden gebruikt voor het aansturen van de nacht verlichting . Bang-good.com , top voor de snelle levering .l

Makkelijk voor lagere spanningen te regelen , ideaal voor de Electronic deze warden gebruikt voor het aansturen van de nacht verlichting . Bang-good.com , top voor de snelle levering .l

Makkelijk voor lagere spanningen te regelen , ideaal voor de Electronic deze warden gebruikt voor het aansturen van de nacht verlichting . Bang-good.com , top voor de snelle levering .l

gut zum Powering

good for powering

gut zum Powering

Okay

Okay

Okay

looks and works as described

looks and works as described

looks and works as described

This one is decent, I tested it at 6.3V output with currents jumping between 0 and 1.3A (with 1.3A staying 70% of the time) and input voltages 9V and 12V. It keeps the output well stable and the ripple is - mostly - within the promised 30mV, while it may jump up to 75mV at very low currents. Unlike the MP1584-based converters here - which will run very hot at the same conditions as above and will need a heat sink - this one (RT8272-based) runs well warm, but is still far from needing any cooling. I doubt it will hold 2A well at higher output voltages though. Still, it is a very decent step-down converter and its slightly higher price is well justified.

This one is decent, I tested it at 6.3V output with currents jumping between 0 and 1.3A (with 1.3A staying 70% of the time) and input voltages 9V and 12V. It keeps the output well stable and the ripple is - mostly - within the promised 30mV, while it may jump up to 75mV at very low currents. Unlike the MP1584-based converters here - which will run very hot at the same conditions as above and will need a heat sink - this one (RT8272-based) runs well warm, but is still far from needing any cooling. I doubt it will hold 2A well at higher output voltages though. Still, it is a very decent step-down converter and its slightly higher price is well justified.

This one is decent, I tested it at 6.3V output with currents jumping between 0 and 1.3A (with 1.3A staying 70% of the time) and input voltages 9V and 12V. It keeps the output well stable and the ripple is - mostly - within the promised 30mV, while it may jump up to 75mV at very low currents. Unlike the MP1584-based converters here - which will run very hot at the same conditions as above and will need a heat sink - this one (RT8272-based) runs well warm, but is still far from needing any cooling. I doubt it will hold 2A well at higher output voltages though. Still, it is a very decent step-down converter and its slightly higher price is well justified.

perfect, but i don't understand what the en pin is for....works fine

perfect, but i don't understand what the en pin is for....works fine

perfect, but i don't understand what the en pin is for....works fine

Schöne kleine Spannungsregler:)

Nice small voltage controllers :)

Schöne kleine Spannungsregler:)

OK

OK

OK

Pünktlich und in guter Ordnung erhalten

Received on time and in good order

Pünktlich und in guter Ordnung erhalten

Alles bestens.

Alles bestens.

Alles bestens.