fabarai You would test with another back camera.
Antwort 18/07/2019BG401054501 I'm having the same issue too
Antwort 21/07/2019
zbyszek
Ibought a radio, all functions are correct. However, I can not properly start the reversing camera. Can anyone help me to run correctly?
https://imgaz.staticbg.com/customers_images/newthumb/fb/f3/2019071408383469-1411488.jpg
Jany SettingNTSC, or PAL
Antwort 22/07/2019BG411141717 O meu esta igual ao seu testei a cam em uma tv e funciona normal, então o problema e da central
Antwort 22/07/2019AtilaKosegil i bought same. same problem.
Antwort 23/07/2019
Marekzenio
Hej.Marek.Sprawdzaem oba wejcia w radiu na kamer a także video In w tej dużej wtyczce. To samo na obu wejciach. Kamerka wraz z przewodem sprawdzana pod zwykym telewizorem zasilana zasilaczem - dziaa.
I have got the same issue. Camera with wires works ok only after connecting to TV -( Video in signal) powered from the external power supply.
In the car with radio does not work !!! I tried with CCD IN and AUX Video IN in the radio. Also tried external power supply ....unsuccessfully.
It is time to write to Banggood...
UriCohen you need to set the reverse camera to sd under factory settings
Antwort 25/07/2019UriCohen you need to set reversing cam to sd under factory settings
Antwort 25/07/2019BG411516142 estou com mesmo problema
Antwort 25/07/2019NPL Isee the same issue
Antwort 25/07/2019Anna Liz tengo el mismo problema en mi estereo
Antwort 25/07/2019NikosKam Same problem. Did you find out any solution?
Antwort 26/07/2019Marekzenio Anyonehas got properly working camera? I have the same issue!
Antwort 26/07/2019Marekzenio Anyonehasgot properly working camera? I have the same issue!
Antwort 26/07/2019Marekzenio I have the same issue. Camera does not work properly. I writes to banggood service. I think that problem is not only ours. I can not add any comments....
Antwort 26/07/2019Anna Liz can u fix this problem?
Antwort 27/07/2019Anna Liz lo pudiste arreglar,
Antwort 27/07/2019
Dabad
I hope this helps you.
when I hook up reverse cameras, I only use one power source, reverse light power, tap into positive and negative of reverse light. do not use any other method.
ignore the confusing picture that banggood put up.
it only needs reverse light power to power the camera, which also triggers the unit to auto switch to reverse camera, should do anyways.
obviously you have the unit working, just make sure you plug the camera extension cable into the "reverse camera" av input.
if this does not solve your problem either the camera or the unit is faulty.
check and double check your wiring.
if your reverse camera has lights, you should be able to see them turn on when you put your car into reverse even when it's not running, as long as ignition is on. that's the most basic way to check if you've wired it up correctly.
ideally you check with multimeter or your cars wiring diagrams as to which is pos+ and which is neg-
good luck, apologies for long message.
Exiumind maybe the camera is another video format? like ntsc/secam
Antwort 27/07/2019Clebinho Ihave this problem, you managed to solve?
Antwort 27/07/2019dariods youtried pal/ntsc?
Antwort 28/07/2019Marekzenio Doesanyone has got properly working camera?
Antwort 28/07/2019
dharmakkan
this problem may be due to fault camera cable . otherwise you didn't fix the connector properly. Try with another camera and wire to solve the problem.
thanks.
Sectec to make it look good you must go to factory settings, put the code 8888 and then go to the video resolution settings and place it in sd quality sd
Antwort 28/07/2019Sectec to make it look good you must go to factory settings, put the code 8888 and then go to the video resolution settings and place it in sd quality sd
Antwort 28/07/2019darkeyescan tamamında aynı sıkıntı var galiba 2 tane aldım bu şekilde gösteriyor ikisi de
Antwort 29/07/2019BG141164224 I'm having the same problem i wonder if you could solve it or not.
Antwort 29/07/2019Clebinho reversevideo resolution setting/SD
Antwort 29/07/2019Clebinho reversevideo resolution SD
Antwort 29/07/2019Sectec fkf
Antwort 30/07/2019
batuhanokur54
Forthose who have problems with the return camera of the product, edit the product's settings menu-fabricated settings. The rear view camera has AHD HD and SD modes, you get it in SD mode you can write in english which has image format. The problem is correcting. no interference. You have to do it this way. (Translated by Google translation. Minor spelling errors.)
0F0Kp
batuhanokur54 thosewho have problems with the return camera. edit the product's settings menu fab factory settings. The rear view camera has AHD HD and SD modes, you get it in SD mode you can write in english which has image format. The problem is correcting. no interference. You have to do it this way. (Translated by Google translation. Minor spelling errors.)
Antwort 31/07/2019BG141164224 i m having the same problem
Antwort 31/07/2019Mark Ibarra ibought the same car head unit and mine does the exact same i dont know what it could be
Antwort 01/08/2019BDProductions did you hook up the wire that goes along with the video extension cable between the reverse light wire @ the tail light and the reverse trigger input on the stereo? that usually works perfect.
Antwort 02/08/2019NikosKam Same problem. Did you find out any solution?
Antwort 02/08/2019Mark Ibarra Ihave fixed the issue with the camera, all you need to do is go to settings then factory settings enter the code 8888 then go to protocol settings go to camera resolution settings and change it to SD and it will work, mine looked exactly like the one in your picture and i fixed it by doing that good luck!
Antwort 03/08/2019
Flyoz
Checkthat the red "Trigger" wire is connected to the Cars reversing light so when reverse selected 12V ve goes to it.
When in forward gears there will be no Voltage
ozcanokan From the factory settings, there is the setting in the protocol settings, then select sd from there.
Antwort 03/08/2019Taifun Mckinsey install on back light and at the radio the red cable connect with Brown cable
Antwort 03/08/2019sumeda weerasekara I am also facing same problem. what happens to your issue? still I am struggling with Banggood..
Antwort 15/08/2019Almir Souza Ihave a similar problem. Has anyone managed to solve the problem?
Antwort 18/08/2019karagounis14 i have the same problem
Antwort 18/08/2019bojanmx If you use live wire from reverse light there might be a problem with canbus error control, there is little amount of current which is used to check if bulbs are blown or not, so that electricity can make problem with your camera...
Antwort 19/08/2019Almir Souza Goodafternoon friend, did you solve the problem?
Antwort 19/08/2019Mustafa1461 Teybin camere çıkışına şase vermen lazım ki tetiği de bağlayınca düzgün çalışacaktır😉
Antwort 20/08/2019ICLEIBE omeu estava assim mas consegui consertar em configura oes, basta por em SD
Antwort 04/09/2019Carlos Infante Compreium artigo com o n FRVFGs333SR
Antwort 28/09/2019
Mauro Marchetta
CIAOBUONGIORNO NON HO ANCORA MONTATO LO STEREO, NON APPENA DOVESSI PROVVEDERE VI RENDERO NOTA
SALUTI
VANDERLEI1979 @Sectec blz irmão... vc salvou minha vida e minha câmera de ré.... deu certinho..... configurações de fabrica , 8888 , reverse vídeo resolution setting, e SD.... perfect..... muito obrigado.... abraços
Antwort 13/10/2019VANDERLEI1979 problema resolvido.... é só ir em CONFIGURAÇÕES DE FÁBRICA....8888... PROTOCOL PARA METER SERTINGS.....REVERSE VIDEO RESOLUTION SETTING.....e colocar em SD.....
Antwort 13/10/2019
kenanc
nohd
select SD
kenanc selectSD
Antwort 12/11/2019
nomdo
Inthe menu 'Reverse video resolution setting' there is no SD option, only NTSC/PAL (Puqing supports fast reversing, HD does not support), AHD/25, AHD/30, TVI/25 and TVI/30.
What can I do?
pauloroso5 tem ligar um rele
Antwort 09/12/2019Štefan Ďaďo St musíš napojiť kameru aj na žiarovku cúvacieho svetly na aute
Antwort 07/01/2020Scarpedico in the siitings need to change the screen resolution to SD
Antwort 03/02/2020Kobie Same problem, but mine work sometimes. Seems like there is a synchronization problem.
Antwort 21/03/2020davutmutlu51 How can we turn off the device completely, a code was being entered, but I forgot
Antwort 02/06/2020Kobie Got the problem solved with another camera. Seems like the supplied camera overheat as it is epoxy potted, and that is why mine work for a few seconds and then take a dive.
Antwort 05/01/2021LLIMA You need to set the reverse camera to SD under factory settings.
Antwort 01/05/2021BG111092117 Reversingcamera does not work, there is no sd mode in settings menu, only hd/non hd. Waste of money, camera workd with other display.
Antwort 19/03/2023Cedrick install a relay on your 12v power supply. it will solve your problem
Antwort 23/06/2023BG111092117 Everyinformation tells trigger wire is pink, but trigger for back up camera is BROWN, third wire from corner, black, red, brown. It takes about 0.5 seconds to camera start so if you test too fast like i did it will not show anything.
Antwort 08/07/2023BanicaEmil Some devices cannot play AHD only CVBS, so if that reversing camera is AHD (from 720p up) the image cannot be played.
Antwort 18/07/2023Unser Unternehmen | Kontaktieren Sie uns | Zahlung & Versand | Partnerschaft-Programme |
---|---|---|---|