BG531457513 No it is 3Amps. The Chinese incorrectly add the capacity of all the cells together. In fact there are to rows of 5 cells, each cell is 1.5Amps joined together to give 21Volts. The second row is the sa... No it is 3Amps. The Chinese incorrectly add the capacity of all the cells together. In fact there are to rows of 5 cells, each cell is 1.5Amps joined together to give 21Volts. The second row is the same also. These 2 rows are connected in parallel so you add the Amp capacity together. Which gives 1.5 plus 1.5=3Amps or 3000mAh. Hope this helps. Mehr zeigen

jns Calculate the size compared to the AM 1.5 standard for a one square meter level surface which has 1000 watts of energy impinging on it. If I assume that the actual solar cells cover 0.5 meters by 0.25... Calculate the size compared to the AM 1.5 standard for a one square meter level surface which has 1000 watts of energy impinging on it. If I assume that the actual solar cells cover 0.5 meters by 0.25 meters, the energy impinging would be 125 Watts. Therefore I conclude that the 100 Watts is the total input energy at the AM 1.5 standard. The output energy after conversion and regulation is likely to be around 20 Watts if the cells have a high conversion rate. Rooftop solar panels are greater than one square meter and can get to 300 Watts if the cells have a high conversion rate. Mehr zeigen