jaminjimlp
Q: why do these have 90 % fail rate, some burn, some blew up on 5 volts.
gefragt von jaminjimlp auf 2023-11-10 03:48:36
CrashLogger You need to limit the current flowing through them. I have a similar set to this one, all of them are 40mA max. I would recommend sticking to under 20mA I'd you want them to last. a 220 Ohm resistor i... Mehr zeigen
2024-03-22 13:48:51 Hilfreich (1)Q: How can I change the RCA output to work with sub control in the EQ setting screen?
gefragt von jaminjimlp auf 2021-03-03 13:37:25
DATK1 Hhhjk
2022-06-13 22:40:13 Hilfreich (0)
Great_Speed Questione di gusti
2022-01-17 02:00:05 Hilfreich (0)Q: I see they are for a 5mm shaft and are for 12mm wheels but how thick are they??? 5mm???
gefragt von jaminjimlp auf 2020-05-26 12:28:28
GAZ121 yes 4mm hex 4 half with the lip
2021-09-26 17:03:26 Hilfreich (0)
xiaohui Great
2021-06-08 05:31:40 Hilfreich (1)
The seller Yes
2021-06-07 06:59:09 Hilfreich (0)
Parageden_345 This propeller outer diameter is about 7.09mm,inner diameter is about 4.03mm,do not have other datas,wl1915 do not have metal upgraded prop
2021-06-03 21:54:01 Hilfreich (0)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you’ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
CrashLogger you need to limit the current to under 40mA, preferably 20mA. a 220 Ohm resistor will do the trick.
2024-03-22 13:49:55 Hilfreich (1)