Kris
meine Inhalte
Alle Nachrichten
Bewertungen
Bewertungen
Antworten
Fragen

Alle Nachrichten

Kris 27/10/2023
Overall a decent fence, however, there are a couple of material issues as well as design issues. 1. Fence stops pieces are made of aluminium base and plastic composite stop piece. The bolt-washer combo which holds the stop piece is undersized for this stop. As a result, it bends easily even with not much force. This is a bad design in combination of a poor choice of materials. 2. The fence micro adjusters are badly designed (too small) and also they cheaped out on the connection design which is done by a bolt-plastic slot combination. It works, but it is not convienient to use and the slack in the connection is huge. I chose not to use it at all. 3. The big stop bolt system has an aluminium turn head but base is plastic. Works, but have to be careful not to break it by tightening the bolt with too much force. Aluminium base part should have been used instead.
ENJOYWOOD Wnew Holzbearbeitungs-Frästisch aus Aluminiumprofil System Zaun 700mm mit Gleitklemmen und Fräser-Schutz
US$175.99 US$399.99
1
Empfehlungen
Kommentar (1)
Kris 09/11/2023
Quality control of packaging is bad. I ordered 12 tracks. 1 out of 12 came in without being properly packed with missing screws and end damaged because of missing the wrap package. I would give this a 3-star rating, but they would filter it out.
1 St. 800mm T-Nuten T-Schienen Montagevorrichtung für Frästisch
US$19.99 US$18.99
0
Empfehlungen
Kommentar (1)
Kris 07/11/2023
The quality is acceptable. The packaging was a bit sloppy. Whoever packed this thing did put the loose steel bolts with a same slot with the miter gauge and it got some cosmetic damage. Otherwise its OK. The only problem I have with its functionality is that the right side is 90 degrees. That means it cant do 45 deg cuts without offseting. This can be annoying for many. I would have preffered it to be 45 deg.
HONGDUI HD-MG21 Gehrungswinkel mit erweitertem Zaun für Holzbearbeitungstischsäge Frästisch Präzise Winkelverstellung
US$255.99 US$399.99
0
Empfehlungen
Kommentar (1)
Kris 27/10/2023
Good tool. Quality as expected. Keeps its 90degree angle when tightened.
ENJOYWOOD Verstellbares 300mm Aluminiumlegierungs-Kombinationsquadrat mit 45 90 Grad Winkel Zirkel Stahl-Lineal für Holzbearbeitung, DIY Zimmermanns-Messwerkzeug
US$10.99 US$25.99
0
Empfehlungen
Kommentar (0)
Kris 27/10/2023
Good tool. Quality as expected. I little pricy, but well worth it.
Holzbearbeitung Fasen Hobel HONGDUI mit 3 austauschbaren Hartmetalleinsätzen Doppelschneiderkante Eckenplane für schnelles Abtrimmen von Holz
US$65.99 US$99.99
0
Empfehlungen
Kommentar (0)
Kris 27/10/2023
Good tool. Quality as expected for the price.
Neuer 3D-Tischkreissäge-Pushblock Holz-Tischkreissäge-Sicherheits-Pushblock
US$69.99 US$79.99
0
Empfehlungen
Kommentar (0)
Kris 26/10/2023
The price is a bit much, but the product is well made. A couple of issues when assembling. a. for some wierd reason a 10mm wrench was included. That was useless, since there is no 10mm bolts or nuts on this thing. Intead there should have been a PH3 screwdriver. b. One steel slider insert had a very bad thread and I was forced to make a new one for it. Luckily I had a right tools for it. I calibrated by making an actual cut and adjusted brackets according to the real outcome. This is a better way to get accurate calibration. When in full lenght the tool was off by 1mm at 1200mm mark. So I had to sand two outer pieces a little shorter to make it fully accurate. When all that was done, everything worked fine and the cuts were up to 0.3mm accurate for all lengths. Overall I am happy with it.
Verbessertes ENJOYWOOD Aluminium-Parallelführungssystem für wiederholbare Schnitte für Schienenkreissägen, passend für Makita- und Festool-Holzbearbeitungswerkzeuge. Haken-Upgrade
US$129.99 US$199.99
0
Empfehlungen
Kommentar (1)
Stack Geprc Stable Pro F7 mit Dual-Gyro F7 Flugregler & 35A BLheli_32 4in1 ESC & 5,8G 500mW VTX für RC Drone FPV Racing
US$162.75 US$150.00

Q: The length of the m2 bolts?

gefragt von Kris auf 2019-08-05 02:07:04

Alvaro Navarro puedes hablar en espanyol?

2020-02-19 12:19:56 Hilfreich (0)
Vorlegen
Antworten (1)
Kris 25/07/2019
Fine props. 0.4g and work well
Happymodel Sailfly-X Ersatzteil 6 Paar 65mm 2-Blatt Propeller mit 1,5mm Befestigungsloch für RC Drone FPV Racing
US$9.23 US$9.99
0
Empfehlungen
Kommentar (0)
iFlight SucceX mini F7 TwinG V3 F722 Flugregler & 35A 2-6S DSHOT1200 ESC & pit / 25/100/200/500 VTX
US$92.69 US$101.97

Q: The length of the m2 bolts?

gefragt von Kris auf 2019-08-05 02:07:15

tiemfpv about 20mm

2019-08-14 10:21:35 Hilfreich (0)
Vorlegen
Antworten (1)
Kris 25/07/2019
Works as advertised.
Runcam Racer Nano CMOS 700TVL 1,8 mm / 2,1 mm Super WDR Kleinste FPV-Kamera 6 ms Gestensteuerung mit niedriger Latenzzeit Integriertes OSD für FPV Racer Drone
US$35.86 US$38.39
0
Empfehlungen
Kommentar (0)

Sie sind der Experte, können Sie helfen?

Wir laden Sie herzlich ein, die E-Mail mit der Einladung zur Antwort zu abonnieren!

Wenn Sie sich anmelden, werden wir Sie per E-Mail einladen, um Fragen zu Produkten zu beantworten. Wenn Sie sich anmelden, erhalten Sie auch das "Hilfreiche Abzeichen"! Sie können sich jederzeit auf der Seite mit den Datenschutzeinstellungen abmelden.

Helfen Sie anderen und seien Sie glücklicher!

  • Abonnieren

Über Abzeichen

Abzeichen sind mit der Community verbunden, und Benutzer erhalten Abzeichen, indem sie hochwertige Inhalte erstellen, Missionen abschließen oder an speziellen Aktivitäten teilnehmen. Bestimmte Personen haben auch ihre eigenen exklusiven Abzeichen.
CEO-Abzeichen

das ceo badge gehört nur dem chef von banggood.

Abzeichen, die Sie verdienen können, folgen in Kürze
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe