qnub
meine Inhalte
Alle Nachrichten
Bewertungen
Bewertungen
Antworten
Fragen

Alle Nachrichten

Digitale programmierbare OLED-Schnittstelle DC5525 Lötkolben Lötstation Saphir-Version
US$64.62 US$74.43

Q: Does it come with the stand as shown in the pictures?

gefragt von qnub auf 2017-12-19 04:26:48

Rickshaw The stand is not included. I bought one a few days ago. I like it very much.

2017-12-25 03:31:32 Hilfreich (1)
Vorlegen
Antworten (6)
qnub 24/10/2018
When it works, it's a very good motor on 6s, smooth and strong. I never crashed the quad, the only two mishaps so far were when I caught a stray branch, disarmed, and the quad fell from eye level to soft ground (grass) with no power to the motors. This was enough to not only bend the shaft of one, but also the stator (a new bell from a spare motor rubs against the magnets but works fine on its own stator). So, unfortunately, durability is lacking. I should have paid more for their more recent motors (R4 upwards) that can take some real abuse, as I found on another quad.
BrotherHobby Returner R2 2205 1750KV 3-6S Brushless Motor CW für RC Drone FPV Racing
US$15.02 US$18.16
4
Empfehlungen
Kommentar (1)
qnub 21/03/2019
Looks very pretty, will have to try once I get the batteries sorted out (weak point of 65mm brushles quads...).
4 Paar Gemfan 1219 1,2x1,9x3 31mm 1mm Loch 3-Blatt Propeller für 0703-1103 RC Drone FPV Racing Brushless Motor
US$11.54 US$11.99
0
Empfehlungen
Kommentar (1)
qnub 21/03/2019
Looks very pretty, will have to try once I get the batteries sorted out (weak point of 65mm brushles quads...).
4 Paare Gemfan 1220 1,2x2x4 31mm 1mm Bohrung 4-Blatt-Propeller für RC-Drohne FP-Racing 0703-1103, bürstenloser Motor
US$11.49 US$11.99
0
Empfehlungen
Kommentar (1)
qnub 04/01/2019
Standard LiPo pack, 4WD with only two differentials (front and rear axis are coupled, nice for offroading), break function, multiple power and steering positions, what more do you want? Cons: 1. The canopy is rather flimsy, I expect it to break easily. 2. There is no indication that the car is turned on, so beware of draining the battery!
HS 18301/18302 1/18 2,4G 4WD High Speed ​​Big Foot RC Rennwagen Geländewagen Spielzeug
US$78.53 US$81.99
0
Empfehlungen
Kommentar (0)
ISDT H605 Air 50W 5A DC 2S-6S Lipo-Batterie Smart-Bluetooth-Ladegerät mit APP-Bedienung
US$38.10 US$39.99

Q: Why won't the Android app run without access to my location?

gefragt von qnub auf 2018-12-16 04:07:37

UpcounNibble Could you send the picture to us? Then we will try our best to solve your problem.

2018-12-28 02:08:25 Hilfreich (0)
Vorlegen
Antworten (1)
qnub 21/11/2018
Most nyloc nuts are 6mm high and are therefore not suitable with many motors and props (for example Cyclones on motors with 12mm shafts) because the plastic doesn't engage the thread of the motor. These are 4.5mm in height, making them compatible with any motor/prop combination. Slightly expensive, though.
5 Stk. Gofly-RC M5 Aluminium Motor Schraubenmuttern mit Nylon-Einsatz Selbstsichernd CW/CCW für RC FPV Racing Drone
US$10.38 US$10.99
1
Empfehlungen
Kommentar (0)
qnub 07/11/2018
It does come with an 8-pin cable. The connectors used on that cable are, however, cheap copies, they don't stay in place like as solidly as, for instance, those from Holybro. Haven't tested in flight yet, though, maybe it's fine anyway. I discarded the M2 hardware that comes with it, it's bad quality and therefore pretty useless.
Original Airbot Omnibus F4 Nano Flugregler mit LC Filter & Ori32 4 In 1 25A Brushless Regler
US$83.94 US$125.90
0
Empfehlungen
Kommentar (1)
qnub 07/11/2018
Connectors are cheap copies, they don't stay in place like as solidly as, for instance, those from Holybro. Haven't tested in flight yet, though, maybe it's fine anyway.
Original Airbot 3CM 8pin Anschlusskabel für 4 In1 Typhoon Brushless ESC zum OMNIBUS V2 Flugcontroller
US$9.23 US$9.99
0
Empfehlungen
Kommentar (0)
qnub 02/11/2018
I thought these would be better than the KingKongs. While they are made of better material, there is just as significant unbalance in ALL of them that they are basically useless because balancing them would take too much work with sand paper.
10 Paar Racerstar V2 5042 5x4.2x3 3 Klinge Propeller 5.0mm Montageloch für FPV Racing Rahmen
US$5.97 US$9.22
0
Empfehlungen
Kommentar (1)
qnub 19/10/2018
OK, this is my fault for not checking, but I just don't get why there aren't more, smaller hex bits included, such as 2mm, 1.5mm, 1.3mm. That would be really useful as many round-head M3 bolts have 2mm, not 2.5mm sockets.
Wowstick 1P+ 19 in 1 Elektrischer Schraubendreher ohne Kabel, kabelloser Akku-Schraubendreher für Reparaturwerkzeuge
US$25.29 US$39.99
0
Empfehlungen
Kommentar (0)
qnub 15/10/2018
Despite what the product description says, there is no USB. Since WLAN is also missing compared to the full-size Runcam Split 2, the only way of getting the video footage out is by removing the microSD card, which might be difficult in certain builds. Other than that, it looks like it's a fine piece of equipment, image quality seems to be roughly equal to that of the full-size Split 2.
RunCam Split Mini 2 FOV 130 Grad 1080P / 60fps HD Aufnahme & WDR FPV Kamera NTSC / PAL umschaltbar
US$71.74 US$81.99
0
Empfehlungen
Kommentar (0)
qnub 26/09/2018
These come unbalanced. All of them. And all in the same orientation. Looks like the mold isn't properly made in the first place.
10 Paare Kingkong 5040 5x4x3 3-Blatt CW CCW Klare Einzelne Farbe Propellern Für FPV Racer
US$13.19 US$14.99
0
Empfehlungen
Kommentar (1)
qnub 26/09/2018
Warning: this item comes with the empty battery case for 18650 batteries, not the USB-charging 1800mAh battery pack as the official HDO from Fatshark. If you're OK with that, go ahead.
FatShark Dominator HDO 4: 3 OLED Display FPV Videobrille 960x720 für RC Drone
US$499.00 US$661.32
2
Empfehlungen
Kommentar (0)
qnub 18/09/2018
First of all, my example causes diagonal stripes across the image. It does that with any camera and any VTX, others in the same set-up don't. Then again, the module is really fragile due to the OLED display sticking out quite far on the top. Since my OLED module broke yesterday, I removed it altogether and replaced it with a socket so I can plug a new one in (they're very cheap) should I ever need it. Then again, you have the OSD, so the only time you really need the OLED is when you've written firmware or messed something up. Why can't we have Achilles so that OSD is permanently on and can't be switched off, at least when the OLED isn't present?
Realacc RX5808-PRO-PLUS-OSD 5.8 GHz 48-Kanal-FPV-Empfänger Achilles Open Source Für Fatshark Brillen
US$57.53 US$61.99
0
Empfehlungen
Kommentar (1)
qnub 05/09/2018
MMCX will pull clean out of the VTX on a crash, protecting the cables, VTX, and antenna. It's the way to go. Other than that, it's a Pagoda, so it's good. Nothing more to say.
Foxeer Pagoda Pro 5.8GHz 2dBi RHCP FPV Antenne 86mm MMCX Schwarz/Rot/Orange
US$6.85 US$10.64
0
Empfehlungen
Kommentar (0)
qnub 05/09/2018
Nice and solid. Comes with no wires soldered (but very good ones are supplied), so no need to remove them before installation. Roughly twice the size of the Kopis 1 ESCs, so I hope they last a lot longer.
4X Holybro Tekko32 35A BLHeli_32 ESC Dshot1200 2-6S eingebauter Stromsensor für RC Drone FPV Racing
US$88.92 US$92.99
0
Empfehlungen
Kommentar (0)
qnub 05/09/2018
It does the job. In 2018, however, I would have expected a charger like this to include a dedicated USB port for updates (and data logging, while we are at it). Pity.
ISDT SClinker Firmware Aktualisierung Datenkabel Für ISDT Ladegerät
US$5.76 US$7.49
0
Empfehlungen
Kommentar (0)
qnub 05/09/2018
Solid charger, very compact. Now the bad part: - discharge performance is very poor, and the fan makes a hell of a noise while discharging; - the screen gets scratched very easily. There is a protector foil included, but putting that on is pointless because the screen was dirty and scratched the minute I removed the warning sticker.
ISDT Q6 Pro BattGo 300W 14A Tasche Lipo Batterie Balance Ladegerät
US$57.49 US$74.99
0
Empfehlungen
Kommentar (0)
qnub 05/09/2018
Really good, WDR works fine, FOV is very nice. There is extra latency compared to simple FPV cameras, but it's about 40ms, not too bad. The only drawback is that the props tend to get in the picture because the camera is mounted where FPV cameras usually are, rather than being elevated like the classic GoPro.
RunCam Split 2 FOV 130 Grad 1080P/60fps HD Aufnahme Plus WDR 4:3/16:9 FPV Kamera NTSC/PAL umschaltbar für RC Drohne
US$69.00 US$99.99
0
Empfehlungen
Kommentar (0)

Sie sind der Experte, können Sie helfen?

Wir laden Sie herzlich ein, die E-Mail mit der Einladung zur Antwort zu abonnieren!

Wenn Sie sich anmelden, werden wir Sie per E-Mail einladen, um Fragen zu Produkten zu beantworten. Wenn Sie sich anmelden, erhalten Sie auch das "Hilfreiche Abzeichen"! Sie können sich jederzeit auf der Seite mit den Datenschutzeinstellungen abmelden.

Helfen Sie anderen und seien Sie glücklicher!

  • Abonnieren

Über Abzeichen

Abzeichen sind mit der Community verbunden, und Benutzer erhalten Abzeichen, indem sie hochwertige Inhalte erstellen, Missionen abschließen oder an speziellen Aktivitäten teilnehmen. Bestimmte Personen haben auch ihre eigenen exklusiven Abzeichen.
CEO-Abzeichen

das ceo badge gehört nur dem chef von banggood.

Abzeichen, die Sie verdienen können, folgen in Kürze
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe