Alle Nachrichten

xenomorf Theprice you are seeing is for the structure alone. You will need to purchase the laser and overhead gantry separately. As for the pricing on other things i can't help you.

2025-01-08 08:38:48 Hilfreich (0)
Vorlegen
Antworten (1)

xenomorf I use the largest laser i can afford. Currently i use a 40 watt laser with this table. The larger the laser the more it can cut. Most software has a power setup in it so you can adjust the lasers power. You don't want to be cutting a piece of paper with an 80 watt laser set to full power. The power settings you need to experiment with. As for your question about the machine i don't know about that. You will have to see what accessories are available for it and go from there.

2025-01-08 08:34:19 Hilfreich (0)
Vorlegen
Antworten (1)

xenomorf Product should be able to cut mdf. The laser that the machine uses is a diode laser which should be able to cut mdf. You will have to make more then one pass though. How many i can't say. The 40 or 80 watt should be sufficient for most of your cutting. This is my opinion only. What i cut and what you cut are two different things. The mdf cutting have n o idea for your region since i have no ideas if the mdf is made the same in your country as in my country. For me i would recommend to 80watt but buy what you can afford. Hope this helps.

2025-01-08 08:23:49 Hilfreich (0)
Vorlegen
Antworten (1)