PNink
meine Inhalte
Alle Nachrichten
Bewertungen
Bewertungen
Antworten
Fragen

Alle Nachrichten

PNink 16/11/2019
Bought this step drill mainly for the fact that it has 1mm steps - unlike most others that offer 2mm steps. The spiral flutes have one significant drawback: The tool grabs and pulls up the workpiece when breaking through from step to step, like a drill does. Something the straight fluted step drills avoid. Chip evacuation is not likely a problem for working on thin panels so I definitely recommend the straight flute step drills for better control. Other than that the tool is sharp and cuts well.
3-13mm/6-25mm/6-35mm M35 Cobalt Schritt Drill Bit Double R 1/4 Inch Hexagon Shank Schritt Drill
US$9.23 US$9.99
2
Empfehlungen
Kommentar (0)
PNink 20/08/2020
This tap drill is a solid performer. I mainly use M3 and M4 with a power drill in mild steel and aluminium. Very good chip clearing and stays sharp for very long. Also haven't broken one of these yet - fingers crossed
Bohrer M3-M10 HSS Co M35 Maschine Sprialflöten Gewindebohrer Metrisches Schneckenloch Rechtshand Gewinde Steckgewindebohrer
US$10.38 US$10.99
0
Empfehlungen
Kommentar (0)
PNink 15/07/2020
Decent quality but somwhat pricy - you pay for the convenience of a kit. Well packaged to avoid shipping damage
RIDEN® Digital Netzteilgehäuse S06A S400 für RD6006 RD6006W Spannungswandler Metallgehäuse Kein Netzteil enthalten
US$52.89 US$83.99
0
Empfehlungen
Kommentar (0)
PNink 15/07/2020
First impression was that someone must have deburred the face mill with a rock. surface finish was terrible. OK apperance is not everything for a tool. Mounting the inserts I reasised that one of the M4 threads was not well formed - reworked with a tap to make it fit. Final test was to sit the end-mill on a flat surface. It rocked - out by 0.2mm. Meaning the tips of the inserts are not on the same plane, will wear unevenly and leave excessive tool marks on the workpeace. Stopped checking there and contacted Bangood with my concerns. No apparent quality control.
400R-50-22 Gesichtsfräser mit MT3-FMB22 Schaft und 4pcs APMT1604 Einsätze
US$53.12 US$55.99
0
Empfehlungen
Kommentar (1)
PNink 15/07/2020
Ok for the price but by no means a precision instrument given the tolerances in the plastic parts, e.g. the scriber was not quite parallel to the base.
Digitale Höhenmesslehre 150mm Schieblehre Mikrometer Elektronische Messung
US$41.39 US$35.99
0
Empfehlungen
Kommentar (0)
PNink 16/11/2019
This carbide insert works well in non-ferrous material and soft steel. I chipped a few corners working in stainless steel, but still great value at that price.
Drillpro 10pcs DCMT070204 YBC251 Hartmetalleinsatz für SDNCN1010H07/SDNCN1212H07 Drehwerkzeughalter
US$10.34 US$10.99
0
Empfehlungen
Kommentar (0)
PNink 16/11/2019
This carbide insert works well in non-ferrous material and soft steel. I chipped a few corners working in stainless steel, but still great value at that price.
Machifit 10 Stück CCMT060204-HM YBC251 Hartmetalleinsatz Titanbeschichteter Hartmetallfräser
US$6.89 US$12.99
0
Empfehlungen
Kommentar (0)
PNink 16/11/2019
handy little set of prototyping PCBs - good quality and inexpensive
Geekcreit® 40 Stk. FR-4 2,54mm Doppelseitige Prototypen-Leiterplatte
US$9.99 US$15.99
0
Empfehlungen
Kommentar (0)
PNink 16/11/2019
very good machine tap for Aluminium - have not used it in steel as yet
Bohrer M3-M10 HSS Co M35 Maschine Sprialflöten Gewindebohrer Metrisches Schneckenloch Rechtshand Gewinde Steckgewindebohrer
US$10.38 US$10.99
0
Empfehlungen
Kommentar (0)
PNink 16/11/2019
Have been using these 3 flute end mills with good success in my CNC router on aluminium. Great surface finish at surprising cutting speeds.
Drillpro 1-8mm HRC58 3 Rillen Schaftfräser Hartmetall CNC Fräswerkzeug für Aluminium
US$6.54 US$6.99
0
Empfehlungen
Kommentar (0)
PNink 16/11/2019
Ground rod was accurate within reason (0.01mm under as far as my micrometer measurements go).good surface finish with some slight marks, probably from transport. Deserves better packaging than only a plastic bag.
Stange mit 6/8/10/12 mm Durchmesser Länge 400 mm Stahlzylinder Linearschiene Linearwelle Optische Achse
US$13.79 US$14.99
0
Empfehlungen
Kommentar (0)
PNink 16/11/2019
Nice sharp machine tap drill. Works as expected on softer materials like aluminium. Have not tried steel yet.
Bohrer M3-M10 HSS Co M35 Maschine Sprialflöten Gewindebohrer Metrisches Schneckenloch Rechtshand Gewinde Steckgewindebohrer
US$10.38 US$10.99
0
Empfehlungen
Kommentar (0)
PNink 16/11/2019
Bought this 3 flute chamfering mill for spot-drilling and chamfering. Was expecting the spot drilling to be smoother than a 2 flute part but there was no significant difference as this tool also rattles a little. Maybe the flutes are not ground even enough? Overall a worthwhile part in the milling toolkit on my small CNC router.
3 Flöten 60 Grad Fasenfräser AlTiN beschichtet HRC55 2/3/4/5/6/7/8mm Wolframstahlfräser
US$11.54 US$19.99
0
Empfehlungen
Kommentar (0)
PNink 11/11/2018
I bought the N58 ECG watch to replace a sports watch with the added benefit of keeping it on my wrist for the rest of the day. Let's see if this product lives up to the expectations. The good points: Out of the box this watch measures heart rate and even blood pressure with surprising accuracy. Watch bands are quickly exchanged between sport and normal use. Look and feel is pretty good The 'analogue' watch dial is appealing and the wakeup on wrist rotation works well. Here are the things that were letting it down: On closer look the plastic watch case looks cheap. In sports mode (walking) the heart rate was only measured every hour - that is useless but I could not find a way to change it Most screens are taken up by large pictograms instead of making the important parameters bigger and easier to read But here is the show-stopper: This watch needs the WearHeart App on the phone to function. This app is poorly written and conceived. Amongst other annoyances it occupied the BT interface so intensively when the watch was out of range that the in-car hands-free and BT streaming from my phone stopped working! Also the battery consumption from the BT interface was enormous! I had to uninstall this App to get my phone back to normal So overall: Great Hardware let down by a lousy App. The N58 ECG did not live up to my expectations and I feel I wasted my money.
Bakeey N58 EKG EKG Display HR Schlafmonitor 3D UI Multisport Fitness Tracker Lederarmband Smart Watch
US$76.18 US$79.99
6
Empfehlungen
Kommentar (1)
PNink 18/03/2019
Very useful and versatile little relay board - as long as you don't use it to switch 240V mains. The clearances for that are not sufficient, especially between neighbouring relays. Stay safe and use it for voltages below 48V only.
Geekcreit® 5V 4-Kanal-Relaismodul für PIC ARM DSP AVR MSP430 Geekcreit für Arduino - Produkte, die mit offiziellen Arduino-Boards funktionieren
US$4.99 US$9.99
0
Empfehlungen
Kommentar (0)
PNink 21/07/2019
One of my favourite end mills for machining aluminium with the CNC router. Good finish and performance for a inexpensive cutter.
Drillpro 1–8 mm 2 Flöten Hartmetall-Schaftfräser HRC55 AlTiN-Beschichtung CNC-Schaftfräser
US$9.23 US$9.99
0
Empfehlungen
Kommentar (0)
PNink 18/03/2019
Great alarm clock - love the projection feature and the fact that the display can be dimmed down to no backlight. The USB charger is very useful too. Only room for improvement is that the clock tends to slide around easily especially when the USB cable is used. A rubber foot would be a good addition.
Digoo DG-C10 LCD Wireless USB wiederaufladbare Hintergrundbeleuchtung Projektionsuhr Temperatur Luftfeuchtigkeit Anzeige Tischuhr für Telefon Pad Lautsprecher
US$21.30 US$25.73
0
Empfehlungen
Kommentar (0)

Sie sind der Experte, können Sie helfen?

Wir laden Sie herzlich ein, die E-Mail mit der Einladung zur Antwort zu abonnieren!

Wenn Sie sich anmelden, werden wir Sie per E-Mail einladen, um Fragen zu Produkten zu beantworten. Wenn Sie sich anmelden, erhalten Sie auch das "Hilfreiche Abzeichen"! Sie können sich jederzeit auf der Seite mit den Datenschutzeinstellungen abmelden.

Helfen Sie anderen und seien Sie glücklicher!

  • Abonnieren

Über Abzeichen

Abzeichen sind mit der Community verbunden, und Benutzer erhalten Abzeichen, indem sie hochwertige Inhalte erstellen, Missionen abschließen oder an speziellen Aktivitäten teilnehmen. Bestimmte Personen haben auch ihre eigenen exklusiven Abzeichen.
CEO-Abzeichen

das ceo badge gehört nur dem chef von banggood.

Abzeichen, die Sie verdienen können, folgen in Kürze
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe