davidrebar
Q: What's the frequency range? 13-45kHz It would be ideal.
gefragt von BastianMxZ auf 2022-04-27 02:51:36
davidrebar 1 of 2 ways.1, Pull the battery for 2 mins, this worked for me.2, If you activate key pad with touch then press and hold the
2021-11-11 08:51:26 Hilfreich (4)Q: Can I switch direction to push handle down instead of pull up?
gefragt von davidrebar auf 2021-10-30 06:59:39
Enjoy Youcan change the left or right operation
2021-11-11 09:28:00 Hilfreich (0)Q: How long can you use the laser before you have to give it a rest?
gefragt von BG233714134 auf 2021-11-11 06:14:33
davidrebar I have run mine for 6 hours at a time, back to back for days with no problems so far. Mine has not shut off from over heating to date. It actually seems to work more consistently if you warm it up with small job first. It would depend on the room temperature too. IF you mod it for better cooling, it will go longer.
2021-11-11 07:29:02 Hilfreich (0)Q: Can you use this on ceramic tiles?
gefragt von BG523849453 auf 2021-11-01 09:55:55
davidrebar Only if you modify it.
2021-11-03 08:21:02 Hilfreich (0)
davidrebar If you activate key pad with touch then press and hold the
2021-11-03 06:55:25 Hilfreich (0)Q: can use this used for C type to HDMI adapter?
gefragt von JayeshYewale auf 2021-06-20 05:57:23
davidrebar No.
2021-06-20 08:10:37 Hilfreich (0)Q: Can these grapes grow in continental (temperate climate)?
gefragt von BG243775351 auf 2021-04-08 09:34:41
davidrebar Just like normal seasonal Concord grapes, but dwarf variety. If Concord grapes grow well in your temperate zone, then yes. Otherwise, for a few bucks you can be the first to find out and report back.
2021-04-09 10:59:19 Hilfreich (0)Q: ya la compre esta lista para funcionar o le falta la electronica?
gefragt von RubenJorgeMossin auf 2017-12-15 04:23:04
davidrebar Todo para que funcione muy bien.
2021-03-05 06:48:07 Hilfreich (0)Q: does one get the whole pack or just a single piece
gefragt von Cjai auf 2019-10-09 11:35:06
davidrebar Just one. The others are to show color choices.
2021-03-05 06:40:21 Hilfreich (0)Q: There are engines cables inside?
gefragt von basiakunczar auf 2021-03-05 12:35:00
davidrebar Yes. Everything that you see in the photo. Everything to make it work. It works very well.
2021-03-05 06:39:17 Hilfreich (0)Q: what is the largest engraver , cutter you sell ? cutting balsa and 1/8 ply
gefragt von BG481422515 auf 2021-02-12 08:07:54
davidrebar The Eleksmaker A3 Pro is the biggest, but if you search the site for extruded aluminum you can upgrade the rails to a very large size.
2021-02-12 08:20:07 Hilfreich (0)Q: Does it come with that writing on the outside or is that added to the photo with computer??
gefragt von davidrebar auf 2021-01-30 08:00:05
davidrebar Versuchen 15ml flussigkeit seife mit 300ml wasser anfangen.
2021-01-18 11:59:13 Hilfreich (0)Q: Is this watch compatible with iPhones?
gefragt von BG101164901 auf 2020-12-19 01:14:38
davidrebar The pedometer and alarms are the only things that work. It always tells me that my pulse is 63, my O2 is 98 and I never sleep. Notifications do not work from my phone. Save your money and get a Garmin Vivosmart.
2020-12-19 03:11:12 Hilfreich (0)Q: Nella confezione sono compresi sia laser che testa per fresare?
gefragt von Diabolik0174 auf 2020-11-21 06:04:26
davidrebar No, solo laser.
2020-11-21 12:25:21 Hilfreich (0)Q: Can I use it for cutting XPS foam?
gefragt von farkasszem auf 2020-10-17 09:44:48
davidrebar Most likely yes, although it's not something that I've tried and its likely to catch fire. It would depend on the foam thickness, type of laser and most definitely need vented to get rid of the toxic gases given off. You must keep in mind the nature of lasers too. A laser gets slightly wider and significantly less powerful over distance. So, the side closest to the laser will be precise, while the bottoms side will be a few hairs over cut on each side of the line. If you need precise cutting on top and bottom you can correct for this by making multiple passes and either refocusing the laser or adding a 3rd dimension to lower the laser enough to refocus it each time. The laser is more powerful on the top side than the bottom because of gasses in our atmosphere. The way to correct for this would be to encase your cutting area in a way, so as to vacuum out the air with a pump. This would also reduce the risk of fire as most foams are flammable and there would be a danger of catching fire unless you can remove the oxygen. If you can't encase it in a vacuum, you might inject CO2 or argon? You are essentially cutting with very high temperature fire !!! A 2500 mw laser is cooler than a 15w laser. You could modify it with a blade or wire to cut, where you can control the heat of the wire with voltage. The laser that comes with this is the weakest, but is adjustable. Other lasers are on or off.
2020-10-18 07:35:22 Hilfreich (0)
davidrebar Is magnet in the base or sensor part?
2020-10-16 08:59:03 Hilfreich (0)Wir laden Sie herzlich ein, die E-Mail mit der Einladung zur Antwort zu abonnieren!
Wenn Sie sich anmelden, werden wir Sie per E-Mail einladen, um Fragen zu Produkten zu beantworten. Wenn Sie sich anmelden, erhalten Sie auch das "Hilfreiche Abzeichen"! Sie können sich jederzeit auf der Seite mit den Datenschutzeinstellungen abmelden.
Helfen Sie anderen und seien Sie glücklicher!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
davidrebar 2.4Ghz WiFi.
2022-04-27 03:01:48 Hilfreich (1)