Wessel_Schaart
meine Inhalte
Alle Nachrichten
Bewertungen
Bewertungen
Antworten
Fragen

Alle Nachrichten

Wessel Schaart Just stuff them into an transistor tester, and see the anser...

sese 04/07/2017
quel pin correspond au G, S et D ??? ...
10 Stück IRFZ44N Transistor N-Kanal International Rectifier Power Mosfet
US$9.99 US$16.99
0
Kommentar (2)

Wessel Schaart Try reversing the polarity (even if that isn't inline with the markings)...

CaptainPhenom 08/02/2018
The item I received seams defective. Doesn't start and when I connect it to 5V it gets very very hot.
Geekcreit® 0,96-Zoll 4Pin Weißes IIC I2C OLED Display Modul 12864 LED Geekcreit für Arduino - Produkte, die mit offiziellen Arduino-Boards funktionieren
US$11.49 US$13.99
0
Kommentar (2)

Wessel Schaart Bad voltage regulator?I've had bad experiences with those things...

hAKi 24/11/2017
+ fast delivery - bad package, comes with broken pin, so I must change it - I2C address is 0x3C and not as it is noted ob silkscreen - for me does not work with libraries with support to reset + it works perfect with U8g2lib, constructor U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE) and U8×8LIB with constructor U8X8_SH1106_128X64_NONAME_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE) - but it works only for a 2 or 3 hours, then suddenly died in front of my eyes. Even I2C_Scanner does not found it anymore
Geekcreit® 1.3 Zoll 4 Weißes OLED LCD Display 12864 IIC I2C Schnittstellen Modul für Arduino
US$8.39 US$19.99
3
Kommentar (2)

Wessel Schaart Seems like an internal short, if that's the case, they will probably get hot...

luigio 13/12/2017
I bought these for my fat shark goggle battery case and got to use them twice before both of them showed as 0 volts and will not come back to life . I also noticed that they ran done a lot quicker than the efest cells I had in my last goggle case . Normally I would get a good few hours out flying and recording DVR but these were draining a lot in 6 to 7 flights . The 3rd charge looked as normal but when I came back to the charger 5 minutes later both cells had stopped charging and showed 0 volts . Perhaps I got a bad pair but I will not be buying cheap 18650s again . Also I did also notice that as they have the positive terminal sticking out they can be quite tight to fit in to devices
2PCS geschützte wiederaufladbare 18650 Li-ion Batterie mit 3,7v und 4000mAh von MECO
US$34.99 US$39.99
2
Kommentar (2)

Wessel Schaart You know that you can bend those pins back, right?

iabusarh 16/12/2017
الجهاز لايعمل the product not working
SIM900A Smart Electronics GPRS A6 Modul Drahtloses Erweiterungsmodul GSM GPRS Antennenmodul SIM900A
US$14.03 US$16.84
0
Kommentar (3)

Wessel Schaart The Mega 2560 is 99,9% UNO compitable...

benoit94 06/05/2016
Warning /!\ Description : 3.5 Inch TFT Color Screen Module 320 X 480 Support Arduino UNO Mega2560 it's for Arduino Uno not for Arduino Mega2560
3.5 Zoll TFT Farb Bildschirm Modul 320 x 480 unterstützen Arduino UNO Mega2560
US$14.99 US$21.99
1
Kommentar (3)
Wessel Schaart 14/05/2018
The kit has some great components, which are a lot of fun to experiment with. But it isn't perfect... Of course you need to learn to code, but that one is ovious. But the problems with it are: The arduino isn't 100% reliable, at first, my computer couldn't recognise it, and it got in some sort of resetting routine for no reason, to work flawlesly again after about an hour. And the kit is missing transistors, which are MANDATORY IF YOU WANT TO USE THE BUZZERs OR TO MULTIPLEX THE DOT MATRIX DISPLAY!!! At least without trashing the arduino (I know this, so I haven't destroyed mine)... And at last, the breadboard isn't the best quality, so it can be difficult to insert components and they like to swiffle in the port. But that isn't a big deal.
Geekcreit UNO R3 Basic Learning Starter Kits Upgrade-Version für Arduino Kartonverpackung
US$40.24 US$38.99
0
Empfehlungen
Kommentar (0)
Wessel Schaart 27/04/2018
A must-have when you have a 3D printer. I've used it for 2 clogs, and it fixed them all...
5PCS 3D Printer Düse Reinigung Werkzeug Bohrer 0.4mm Größe für Extruder RepRap
US$4.90
0
Empfehlungen
Kommentar (0)
Wessel Schaart 27/04/2018
As you've probably read in the other reviews, some markings are missing. But besides that, they are just nozzles that fit on a E3D hotend.
Geekcreit® 8 Stück V6-Messingdüsen in vier Größen für 1,75-mm-Filament. Düsen-Extruder-Druckkopf
US$9.23 US$9.99
0
Empfehlungen
Kommentar (0)
Wessel Schaart 27/04/2018
This one arrived damaged, but the Banggood helpdesk was really helpfull, and they've send me a new one. The replacement works fine, and is a lot of fun to use. That one had a broken screen (last number doesn't show up on the screen), but that part was fine on this one... I was able to get this one up and running, by buying an overpriced spare, and swapping some parts with the new one (some parts of this one didn't like the spare, but worked fine with the new one) So after all this trouble, I was able to get them both running, and if you like to tinker a bit, these are great... But if you just want to get something that works out of the box, try something else...
2. Generation 3D-Druckstift mit 3x 1,75mm ABS-Filament-Kit für Anfänger & Kinder mit USB-Aufladung oder EU-Steckeradapter
US$28.74 US$29.99
0
Empfehlungen
Kommentar (1)

Wessel Schaart That ERR message means that one or more of the wires to the nozzle module don't make a good connection.Try wiggling them around or resolder all the connections, check for continuity between the two outer and inner wires, because if that isn't the case, the nozzle is broken.

belzebuth974 24/12/2017
the two 3D pens bought as a Christmas present don't work out of the box. This is outrageous!!!! As soon as they are turned on, both pens display "err", the red LED flashes and nothing can be done about it. It's really bad equipment. https://youtu.be/7wxWzrJdbPU
2. Generation 3D-Druckstift mit 3x 1,75mm ABS-Filament-Kit für Anfänger & Kinder mit USB-Aufladung oder EU-Steckeradapter
US$28.74 US$29.99
0
Kommentar (2)
2. Generation 3D-Druckstift mit 3x 1,75mm ABS-Filament-Kit für Anfänger & Kinder mit USB-Aufladung oder EU-Steckeradapter
US$28.74 US$29.99

Q: Que tipo de filamento usa esta pluma 3D?

gefragt von BG565317488 auf 2017-11-22 11:11:57

Wessel Schaart It also works with PLA...

2018-03-17 02:25:59 Hilfreich (0)
Vorlegen
Antworten (5)

Wessel Schaart The description says that the smd-components, which are diffidult to solder, have been soldered, and not that everything is soldered, because it's a kit...

Banggood Smit 05/08/2016
Both the text and the youtube film sugest this product is soldered and only some assembly has to be done. THIS IS NOT THE CASE.. Three smd chips and a bunch of resistors are soldered. The vast majority of the components is NOT SOLDERED. Agreed, (only) one of the pictures shows all components unsoldered, but I thought that was only to show what it was made of. I hope I can get it to work without screwing it up but it seems above my techniscal skills. I'm not happy with this. Maybe it is a good product (cannot tell any time soon), but I ask the seller to be more honest about what exactly the buyer gets.
Original JYE Tech DSO138 DIY Digital Oszilloskop Satz SMD gelötet 13803K Version mit Gehäuse
US$31.89 US$34.99
1
Kommentar (2)
Wessel Schaart 27/02/2018
The parts differentiate between the single units, but as a whole, it just work great. They keep the voltage nice and stable, can handle a lot of current for they size, and between you and me, those big solder pads are also a big plus ;-)
Geekcreit® DC-DC Boost Buck einstellbares Schritt-auf-Schritt-Abwärts-Autokonvertermodul XL6009 geeignet für Solarmodule
US$6.99 US$8.99
0
Empfehlungen
Kommentar (0)
Wessel Schaart 27/02/2018
The wire is thin, it's second layer of insulation is even thinner, and it's core is really small. Those cores don't twist together as usual, and won't stay in a screw terminal, and really like to split apart, and then don't get back, whatever you do. AND THEY'VE CHEATED WITH THE SHAPE OF THE (European) PLUG!!! In the end, it works fine for what I need, but they are not great...
AC Netzkabeladapter mit 3-poligem Stecker für Laptop
US$6.99 US$8.99
0
Empfehlungen
Kommentar (1)
Wessel Schaart 27/02/2018
When I need to carry more current, this is my go to wire.
DANIU 2M AWG Soft-Silikon-Flexibles Kabel 12-20 AWG (1 Meter rot + 1 Meter schwarz)
US$8.07 US$8.99
0
Empfehlungen
Kommentar (0)
Wessel Schaart 27/02/2018
It just works, but the tab to solder to for the inner core is really thin, and those plastic covers, YUCK... The strain-releave breaks rather than protecting the wires, and the way they screw on, you have to feel it in person if you want to understand what makes it so bad. But they do work, and once the wires are on, they work anyways.
Excellway® JP02 10 Stück 5.5x2.1mm DC Power Stecker Löthülseneinsatz
US$6.59 US$17.99
0
Empfehlungen
Kommentar (0)
Wessel Schaart 27/02/2018
Only the male one's are sometimes slightly bent, which only looks strange, and those ANNOYING green connectors which work great in theory, but are actually more anoying than they should be... For me anyway... They do feel like quality, except from those screw terminals...
10 x Steckerbuchse Adapterstecker 12V DC 5,5x2,1mm für CCTV
US$15.00 US$15.99
0
Empfehlungen
Kommentar (0)
Wessel Schaart 27/02/2018
What you would expect, a nice, silent, powerfull little fan which has a different sticker on the back than shown on the pictures and a wire which keeps popping loose from it's little indent.
3D-Drucker, 12V DC 50mm Radial-Gebläsekühler
US$4.61 US$9.99
0
Empfehlungen
Kommentar (0)
Wessel Schaart 27/02/2018
The power supply is good, but mine arrived with a bend corner. Which isn't a big deal at all. Also, the terminals were slightly skewed, looking from the top, which doens't affect the function, but makes clear how great the quality control is... Other than that, triple points for the already tuned output voltage!
AC110-220V To DC 12V 10A 120W Power Supply Lighting Transformer Adapter Driver For Strip Light Lamp
US$14.55 US$17.77
0
Empfehlungen
Kommentar (0)

Sie sind der Experte, können Sie helfen?

Wir laden Sie herzlich ein, die E-Mail mit der Einladung zur Antwort zu abonnieren!

Wenn Sie sich anmelden, werden wir Sie per E-Mail einladen, um Fragen zu Produkten zu beantworten. Wenn Sie sich anmelden, erhalten Sie auch das "Hilfreiche Abzeichen"! Sie können sich jederzeit auf der Seite mit den Datenschutzeinstellungen abmelden.

Helfen Sie anderen und seien Sie glücklicher!

  • Abonnieren

Über Abzeichen

Abzeichen sind mit der Community verbunden, und Benutzer erhalten Abzeichen, indem sie hochwertige Inhalte erstellen, Missionen abschließen oder an speziellen Aktivitäten teilnehmen. Bestimmte Personen haben auch ihre eigenen exklusiven Abzeichen.
CEO-Abzeichen

das ceo badge gehört nur dem chef von banggood.

Abzeichen, die Sie verdienen können, folgen in Kürze
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe