Alle Nachrichten

Q: hai... will this fit for hsp savagery 1/8?

gefragt von BG361311381 auf 2020-11-22 07:52:55

BG138135222 should check part number

2022-03-15 07:41:08 Hilfreich (0)
Vorlegen
Antworten (5)

Q: Is it 17mm hex in the wheels

gefragt von jojo_mek auf 2019-09-20 01:00:12

BG138135222 sure

2022-03-15 07:40:52 Hilfreich (0)
Vorlegen
Antworten (3)

Q: is it somewhat waterproof

gefragt von BG111254125 auf 2020-12-20 06:25:48

BG138135222 yes

2022-03-15 07:40:32 Hilfreich (0)
Vorlegen
Antworten (8)

Kevin You have to get the pinion gear as close to the spur gear as possible but still allow for a VERY small amount of movement with the spur. You should be able to wiggle the spur with your fingers just ever so slightly. Usually the trick is to put a piece of paper between the gears, push them together, tighten the screws and then pull the paper out. Check for a small amount of wiggle room with the spur. If there isn't any, fold paper in half to double thickness and try again. But the important part is that there is a small amount of wiggle room between the gears so they don't bind.

2022-03-11 07:12:54 Hilfreich (1)
Vorlegen
Antworten (2)

BG138135222 I'm looking for a review on the sound of the spur gear. is yours smooth or does it seem to take off ruff at first. thanks

JeromeBZH 19/03/2021
0
Kommentar (1)