Alle Nachrichten

JayBee The Manufacturer always knows best. Read what is written ion the ESC.

2020-11-23 02:54:27 Hilfreich (0)
Vorlegen
Antworten (2)

Q: Where can I buy the 4-blade US65/UK65 propellers?

gefragt von TweakRacer auf 2019-01-05 03:24:17

eried Ibought betafpv 4-blade ones and they work perfectly :)

2020-01-16 03:11:48 Hilfreich (0)
Vorlegen
Antworten (1)

Q: why 2 rhcp and 2 lhcp? should be all the same

gefragt von CpnMercury auf 2019-12-12 10:08:08

TweakRacer Exactly. Should all be the same. Same goes for the MMCX antennas for the Air Unit. Lastly, SMA? This set is garbage.

2019-12-20 12:11:13 Hilfreich (0)
Vorlegen
Antworten (10)

Q: None popo option? Is this using a c-clip or screw?

gefragt von FTJ auf 2018-12-27 03:21:48

TweakRacer Curitis, the question is about the retaining of the shaft at the bottom of the motor, you dumb dumb

2019-01-21 04:15:16 Hilfreich (1)
Vorlegen
Antworten (2)

Q: Are this licensed PoPo motors?

gefragt von koncombre auf 2018-12-31 05:37:48

TweakRacer JB, are you staying that Lumenier manufactures POPO shafts and sells them to other manufacturers like T-Motor or OEM brands like Hyperlite? Thought they were licensing to others, not actually selling them shafts to their specs. How do you know that RacerStar didn’t license or buy from Lumenier? Why stir up more drama? Also, the RacerStar motors use the POPO Pro style shaft (no pin sticking out the top), so they’re not supposed to be threaded. Geez

2019-01-21 04:14:09 Hilfreich (0)
Vorlegen
Antworten (2)

Q: what propellers are suitable for these motors

gefragt von Klapan2kl auf 2018-12-24 12:25:14

TweakRacer JB, are you staying that Lumenier manufactures POPO shafts and sells them to other manufacturers like T-Motor or OEM brands like Hyperlite? Thought they were licensing to others, not actually selling them shafts to their specs. How do you know that RacerStar didn’t license or buy from Lumenier? Why stir up more drama? Also, the RacerStar motors use the POPO Pro style shaft (no pin sticking out the top), so they’re not supposed to be threaded. Geez

2019-01-21 04:13:57 Hilfreich (0)
Vorlegen
Antworten (2)

Q: Why not available for US customers?!

gefragt von TweakRacer auf 2019-01-21 04:07:54

PaulyB why would you want Racerstar rubbish? the motors are utter garbage!

2019-02-15 03:44:33 Hilfreich (0)
Vorlegen
Antworten (1)

Q: What's prop spinner diameter, please?

gefragt von Romushock auf 2018-06-05 04:00:50

TweakRacer The propeller is 9096 or 9" x 9.6", with a 22.5cm diameter... however, the question was about the diameter of the SPINNER (or "propeller cover")!

2018-09-25 05:55:22 Hilfreich (0)
Vorlegen
Antworten (5)

TweakRacer Stop asking for motor braking! If you stop the propellor the wing will glide faster and further. It is better for the propeller to spin freely and windmill, which will slow the wing for landing.

2018-09-24 07:27:16 Hilfreich (0)
Vorlegen
Antworten (2)

Q: why they send an incorrect propellers?

gefragt von Sergio_Luis auf 2018-05-09 12:43:35

TweakRacer If the propellor is wrong direction, just swap any two of the three wires from between the ESC and motor. Then the motor will run in the opposite direction and work fine with the propeller.

2018-09-24 07:25:20 Hilfreich (0)
Vorlegen
Antworten (2)

TweakRacer Now no PNP is even available as an option. WTF? And now even the kit is pushed back to 10/10/18? I wanted to buy the blue PNP, but I give up.

2018-09-23 04:25:49 Hilfreich (1)
Vorlegen
Antworten (1)

TweakRacer Now no PNP is even available as an option. WTF? And now even the kit is pushed back to 10/10/18? I wanted to buy the blue PNP, but I give up.

2018-09-23 04:25:49 Hilfreich (1)
Vorlegen
Antworten (1)