Alle Nachrichten

Stuclik 27/04/2022
This is my 3rd mechanical keyboard so I can not avoid it comparing to my first beloved one (K2V2 with gateron pro brown). To start, I think this is a good beginner keyboard that can serve as a basis for modding experiments especially thanks to hotswap sockets (the reason I bought it for). USB passthrough is really great feature and I use it a lot when doing some 3D print prototyping - so I have microsd reader in the keyboard and do not have to lean to my laptop to write the gcode to the card. I have not tried 2.4G connection so far, but bluetooth is reliable and has sufficient range. Stabilizers were surprisingly acceptable out of the box and are perfect after modding. Now what I dislike: The RK switches are bad. Period. Scratchy, rattly, noisy (I know, I bought blues, but compared to Outemu I already have these RK are terrible). RGB PWM flicker is killing my eyes (my K2V2 has white backlight for this reason) and you have to use software to come at least close to white. Switches on the bottom are also not very convenient. Keycaps have little rough texture but I will probably get used to them (they are really PBT by the way - tested with acetone). To sum it up: Overall good cheap keyboard for modding (did case foam, plate foam and stabs mod right after checking it works and jailhoused and lubed those blue switches after one week to make them at least a bit pleasant to use). However if I was deciding again, I would choose white backlit K2V2 hotswap for $33 more (that I will invest to some usable switches for this RK84 anyways).
0
Empfehlungen
Kommentar (0)

Tomberland That's why I've installed a XT90 on mine. It is much better suited for this battery.

2021-10-28 04:48:14 Hilfreich (0)
Vorlegen
Antworten (2)

Q: Will it be ever restocked?

gefragt von Stuclik auf 2019-07-24 04:31:14

AJBEAR I will hope so too

2021-10-23 02:31:00 Hilfreich (0)
Vorlegen
Antworten (1)

Stuclik In my opinion no. DJI does not provide international warranty to my knowledge...

2020-02-12 04:38:44 Hilfreich (0)
Vorlegen
Antworten (2)

Q: dose it has current sensor?

gefragt von Aviad auf 2018-07-23 04:48:39

Stuclik Aparently yes. Current sensor is that large black component with large grey colderpads near main power solderpads.

2018-07-25 02:09:28 Hilfreich (0)
Vorlegen
Antworten (1)

Q: Can I run

gefragt von dukevah auf 2017-11-29 11:30:48

Stuclik Run Forrest, run! :-)

2017-12-04 07:57:39 Hilfreich (0)
Vorlegen
Antworten (1)