Alle Nachrichten

Imbueeeam yes,it would be instock soon

2021-02-05 10:43:47 Hilfreich (0)
Vorlegen
Antworten (1)

Q: can you tell the distance between 2 holes??

gefragt von BG184456057 auf 2020-10-27 12:58:36

Fish According to the dimensions drawn on the picture on the add, It 5.9cm.

2021-01-22 02:29:54 Hilfreich (0)
Vorlegen
Antworten (1)

The seller Drawstring at the edge, there are several new detailed pictures updated

2021-02-04 09:30:39 Hilfreich (0)
Vorlegen
Antworten (1)

Q: Are these tools for a metal or wood lathe?

gefragt von Ines Thomas auf 2019-03-05 02:30:41

Fish Usedfor metal turning

2020-08-16 02:49:25 Hilfreich (0)
Vorlegen
Antworten (8)

Driftwas sorry, i do not know about it. you could contact the supplier for help.

2020-08-06 08:16:28 Hilfreich (0)
Vorlegen
Antworten (1)

Fish Hi there, Mine came like the picture. Display, cable with plug and cable with pickup and a magnet.

2020-07-27 02:38:58 Hilfreich (0)
Vorlegen
Antworten (2)

Fish Hi there, It is in fact a dead center. The center point does not move. The seller has made a mistake. This center is great for turning small items between centers. The cut away allows one to get the lathe tool up close to the center. Hope this helps

2020-07-27 02:36:54 Hilfreich (0)
Vorlegen
Antworten (2)

Q: Is the connection to the mill B16?

gefragt von Franky auf 2018-01-04 05:20:55

Fish This is a collet block and not a collet chuck. used to index collet held items hex or square in a vice for example. For example, B16 is a chuck arbor taper code for the side where a chuck would go. MT3 or R8 is the taper on machines connection side. Collet blocks are not that type of chuck and arbor. Seller might have or be able to help

2020-07-13 08:58:11 Hilfreich (0)
Vorlegen
Antworten (2)

Q: Does it come with the magnet?

gefragt von Edmundo auf 2019-10-14 11:36:02

Fish Mine did come with a magnet.

2020-07-13 08:54:09 Hilfreich (0)
Vorlegen
Antworten (5)

Q: is that come on the box?

gefragt von pghcosta auf 2020-07-12 02:48:44

Fish Hithere, I comes in a cardboard box, packed in polystyrene and in a plastic bag. No fancy box. I made my own wooden storage box

2020-07-13 08:53:28 Hilfreich (0)
Vorlegen
Antworten (1)

Q: Where can I find a drawing on how to wire this up?

gefragt von vernmitch auf 2019-04-16 04:44:01

Fish I found it on youtube. Have a look at O

2020-06-05 02:45:52 Hilfreich (0)
Vorlegen
Antworten (2)

Fish Thewiring diagram on the back of the product is correctly illustrated. Dont think it matters but I coppied someone elses wiring from a picture on the site. I connected the coil unit with black at the top, Red next one down. Brown (live) next to the red and then Blue (Neutral) at the bottom. I wired it into a plug circuit on the board where i fitted it and added an on-off switch. Could also just wire a plug in and plug it in a normal plug. Hope this helps

2020-01-10 07:58:45 Hilfreich (0)
Vorlegen
Antworten (1)

Fish Ihave found it does store the last recorded data but have not tested how long or played with the settings. Hope this helps but someone might be able to give a better answer than i

2020-01-10 07:45:35 Hilfreich (1)
Vorlegen
Antworten (3)