logrythm
Q: Can I cut and engrave from the same laser module?
gefragt von BG384212910 auf 2020-11-15 11:43:37
logrythm Sure, no reason why not. Cutting generally uses higher power setting and slower travel-speed than for engraving, and maybe multiple passes. Depending on the material of course. But not "30 passes" lol. Always ensure the focus 'dot' is as small as possible.
2020-11-16 06:23:19 Hilfreich (1)
logrythm Do you mean "nano" board I wonder? I'm using an Eleksmaker board too, flashed to 1.1e (using T2Laser software). I think it would work with a nano board as all these other boards are basically copies of arduino technology. They are all speaking the same 'language' to the laser; that is "TTL". This laser has it's own 12v power supply for connecting to it's handy little board, so I only used the two TTL signal wires coming from the eleksmaker to connect to it, leaving out the 12v one. The fan only runs when laser is warm so I needed to use an extra 12v fan for 'air assist' to remove smoke for proper laser operation.
2020-11-02 04:51:40 Hilfreich (0)
Q: Can you also cut plants with this laser? If so, at what speed?
gefragt von ulpigo auf 2020-10-22 09:51:17
logrythm Not sure what to say apart from do what I do; experiment with power and speed because every material is different and surprisingly so sometimes.
2020-10-22 08:49:03 Hilfreich (0)
Q: 8W is power - input current consumption or laser - optical power?
gefragt von Andreo32 auf 2020-09-04 08:37:20
logrythm 1400mW
2020-09-06 09:27:19 Hilfreich (2)Wir laden Sie herzlich ein, die E-Mail mit der Einladung zur Antwort zu abonnieren!
Wenn Sie sich anmelden, werden wir Sie per E-Mail einladen, um Fragen zu Produkten zu beantworten. Wenn Sie sich anmelden, erhalten Sie auch das "Hilfreiche Abzeichen"! Sie können sich jederzeit auf der Seite mit den Datenschutzeinstellungen abmelden.
Helfen Sie anderen und seien Sie glücklicher!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
logrythm I believe so. I'm using something similar; eleksmaker. Same connections. I only attached TTL signal, not the 12v with it, as the laser has its own power supply.
2020-12-26 10:33:55 Hilfreich (1)