acanthurus Update after some flights: Using this as a little FPV racer with a TX06 cam , 4.3g servos and a 2s 350mAh battery now. RC installation is tight, some foam had to be cut out. It flies REALLY well and provides some 5-6 minutes of FPV fun in this configuration. More precise and accurate to fly compared to its \"idea donor\", the umx stryker. Great fun doing fast low passes.

acanthurus Update: Still performing unchanged after 30 cycles

acanthurus Itmay be too obvious, but are you aware that the switch has 3 channels? If it is switched to the third channel where no camera is attached, you may have a black screen.

acanthurus Long term experience is catastrophic. In an outdoor environment, the colour was withered after only 6 weeks to a dull blue-green. Indoors, it looked shitty after 6 months.

acanthurus Update: Servo reversal through command line in betaflight was possible - so the reported issue is solved.

acanthurus Ifyou clip off the OSD connector to save weight, make sure you bridge the tho cables which are short looped close to the connector, otherwise you will have no picture.