Antworten

FlyingSandal I had this issue too, you have to start your takeoff roll with full up elevator, ease throttle gradually, let the tail come up slightly while continuing to gain speed and finally apply full up elevator again to get off the ground and ease off elevator as soon as it's off the ground to avoid a stall and keep on climbing slowly. you need to practice to get this down. not the easiest to take off.

Hilfreich (0)
Vorlegen
Antworten (4)

FlyingSandal i fly mine with 5000 mAh 4S battery, lined up with the front of the battery tray and it balances well

Hilfreich (0)
Vorlegen
Antworten (1)

FlyingSandal connect all to the same ground and all to the same voltage. the signals of each channel to each servo. done

Hilfreich (0)
Vorlegen
Antworten (4)

Q: is this compatible with r9m module?

gefragt von marceldovat auf 2020-05-13 19:34:23

FlyingSandal no, you need an r9 receiver

Hilfreich (0)
Vorlegen
Antworten (4)

FlyingSandal Agree as well! Its super small, and you get full telemetry and full range. This is my go-to quad receiver.

Hilfreich (1)
Vorlegen
Antworten (7)