One of the most useful tool I've ever bought. It helps me removing pinion gear with ease. The size is a bit small as you can see in the photos but it's perfect for 130 motor that I use. The box is nice too.

One of the most useful tool I've ever bought. It helps me removing pinion gear with ease. The size is a bit small as you can see in the photos but it's perfect for 130 motor that I use. The box is nice too.

One of the most useful tool I've ever bought. It helps me removing pinion gear with ease. The size is a bit small as you can see in the photos but it's perfect for 130 motor that I use. The box is nice too.

Simple and extremely useful tool for removing pressed shaft items with diameter of 3 mm or less. I added a piece of shrink tube on each end of the handle to keep it from falling out. Select the bit that is slightly smaller then the shaft to be pushed out. Lock the bit into the handle with the set screw, don't over-tighten, just snug to keep it from falling out. Determine which notch will provide the most surface area and support against the gear, slide the notched plate into the grooves of the removal press Position the notched plate around the shaft and behind the gear to be removed, the gear will be toward the bit. Align the shaft with the bit. Slowly tighten the bit down onto the shaft until it pushes the shaft from the gear. note: watch for binding so that the bit does not get stuck in the gear

Simple and extremely useful tool for removing pressed shaft items with diameter of 3 mm or less. I added a piece of shrink tube on each end of the handle to keep it from falling out. Select the bit that is slightly smaller then the shaft to be pushed out. Lock the bit into the handle with the set screw, don't over-tighten, just snug to keep it from falling out. Determine which notch will provide the most surface area and support against the gear, slide the notched plate into the grooves of the removal press Position the notched plate around the shaft and behind the gear to be removed, the gear will be toward the bit. Align the shaft with the bit. Slowly tighten the bit down onto the shaft until it pushes the shaft from the gear. note: watch for binding so that the bit does not get stuck in the gear

Simple and extremely useful tool for removing pressed shaft items with diameter of 3 mm or less. I added a piece of shrink tube on each end of the handle to keep it from falling out. Select the bit that is slightly smaller then the shaft to be pushed out. Lock the bit into the handle with the set screw, don't over-tighten, just snug to keep it from falling out. Determine which notch will provide the most surface area and support against the gear, slide the notched plate into the grooves of the removal press Position the notched plate around the shaft and behind the gear to be removed, the gear will be toward the bit. Align the shaft with the bit. Slowly tighten the bit down onto the shaft until it pushes the shaft from the gear. note: watch for binding so that the bit does not get stuck in the gear

quality gear puller

quality gear puller

quality gear puller

Ok, sobald ich das öffnete, fing ich sofort an, alte Zahnräder von Motoren, die ich zerlegt habe, loszuziehen, und leider, als ich damit fertig war, war ich enttäuscht, nicht im Werkzeug, Aber dass ich nicht mehr abziehen musste, nahe an 50 Motoren, habe ich gezogen, und bin rausgerannt. Dies ist definitiv kaufen, funktioniert gut, und schnell, so einfach zu ziehen Zahnräder, und auf Dinge auf den Wellen der Motoren stecken!

Ok as soon as i opened this , i immediately started to pull off old gears off of motors i have disassembled, and sadly when I finished with that, i was disappointed, not in the tool, but that I didn't have anymore to pull off, close to 50 motors, I pulled, and i ran out. This is definite buy, works great, and quick, so easy to pull off gears, and stuck on things on the shafts of the motors!

Ok, sobald ich das öffnete, fing ich sofort an, alte Zahnräder von Motoren, die ich zerlegt habe, loszuziehen, und leider, als ich damit fertig war, war ich enttäuscht, nicht im Werkzeug, Aber dass ich nicht mehr abziehen musste, nahe an 50 Motoren, habe ich gezogen, und bin rausgerannt. Dies ist definitiv kaufen, funktioniert gut, und schnell, so einfach zu ziehen Zahnräder, und auf Dinge auf den Wellen der Motoren stecken!

Altamente recomendado, muchas gracias!

Altamente recomendado, muchas gracias!

Altamente recomendado, muchas gracias!

works great, good metal. The hard part is putting one on.

works great, good metal. The hard part is putting one on.

works great, good metal. The hard part is putting one on.

vraiment top !!! je viens d enlever mon pignon du moteur anticoupe du mjx f45. le pignon sort tout seul sans forcer merci encore banggood pour la vitesse envoie au top

vraiment top !!! je viens d enlever mon pignon du moteur anticoupe du mjx f45. le pignon sort tout seul sans forcer merci encore banggood pour la vitesse envoie au top

vraiment top !!! je viens d enlever mon pignon du moteur anticoupe du mjx f45. le pignon sort tout seul sans forcer merci encore banggood pour la vitesse envoie au top

Doporučuji koupit 🙂

Doporučuji koupit 🙂

Doporučuji koupit 🙂

parece ser bom mais ainda não utilizei.

parece ser bom mais ainda não utilizei.

parece ser bom mais ainda não utilizei.

prodotto di qualità in buone confezioni

prodotto di qualità in buone confezioni

prodotto di qualità in buone confezioni