When you want to connect something to the GPIO pins, be careful for the head room you need as when the top opens the room above the pins is reduced. I had trouble getting the Ethernet connector though the hole and had to adjust the enclosure to increase it a little. The 2 part enclosures (bottom/top) still has my preference.

When you want to connect something to the GPIO pins, be careful for the head room you need as when the top opens the room above the pins is reduced. I had trouble getting the Ethernet connector though the hole and had to adjust the enclosure to increase it a little. The 2 part enclosures (bottom/top) still has my preference.

When you want to connect something to the GPIO pins, be careful for the head room you need as when the top opens the room above the pins is reduced. I had trouble getting the Ethernet connector though the hole and had to adjust the enclosure to increase it a little. The 2 part enclosures (bottom/top) still has my preference.

This is a beautiful case that snaps together easily using a very clever design. It would be perfect except that the hole for the USB ports is not quite large enough. I was able to force the USB ports through the hole, but it caused the plastic to crack and bent the metal RFI shielding that surrounds the USB ports. The case still works and the crack is only cosmetic, but the design needs to be revised. Note that the body panels are covered with a thin translucent film that you should peel off before assembly; the case is perfectly transparent.

This is a beautiful case that snaps together easily using a very clever design. It would be perfect except that the hole for the USB ports is not quite large enough. I was able to force the USB ports through the hole, but it caused the plastic to crack and bent the metal RFI shielding that surrounds the USB ports. The case still works and the crack is only cosmetic, but the design needs to be revised. Note that the body panels are covered with a thin translucent film that you should peel off before assembly; the case is perfectly transparent.

This is a beautiful case that snaps together easily using a very clever design. It would be perfect except that the hole for the USB ports is not quite large enough. I was able to force the USB ports through the hole, but it caused the plastic to crack and bent the metal RFI shielding that surrounds the USB ports. The case still works and the crack is only cosmetic, but the design needs to be revised. Note that the body panels are covered with a thin translucent film that you should peel off before assembly; the case is perfectly transparent.