Rennflug Betaflight REVO F4 STM32F405 Flugsteuerung mit Vbat / Summer für RC Drone
Ein Teil der Rezension wurde automatisch übersetzt.
This F4 FC is the cheapest one i've ever seen. It's quality is good too!! Please Upload Airbot F4 Hex while uploading the firmwares. First install the STM32 drivers(http://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-utilities/stsw-stm32102.html) and ZADIG(http://zadig.akeo.ie/). Then make sure you enter the flashing mode by holding the Boot Button on the bottom left and powering up the FC. The Configurator(Raceflight/Betaflgiht) should show DFU as seen in the pics. For betaflight, do as you see in the picture. For raceflight download (https://raceflight.net/rf1beta/revolt222.bin) and load the firmware(OFFLINE LOADING).You can even use the blackbox(onboard flash), by enabling it from the configurator, and then reading back from the blackbox viewer (https://github.com/betaflight/blackbox-log-viewer). :)
Контролер сильно греется , Проблем с прошивкой не возникло. При работе с REVO.HEX BF3.0.1 Не работали LedStrip пока не нашел другую схему подключения. Также сразу отвалилась верхняя часть кнопки BOOT