BJR981S
Q: how do i bind witj my flysky 10 channel conntroler
gefragt von starboy86 auf 2020-10-24 12:12:07
BJR981S Reverse the servo channel on your radio.
2022-03-31 01:50:21 Hilfreich (0)Q: Does this support the Play Store?
gefragt von BJR981S auf 2018-07-24 03:14:55
gordi Yes
2022-01-19 07:28:01 Hilfreich (0)
BJR981S Thatis because it's not the same battery. Its only 52 Watt hours the correct as supplied with the helicopter is 68 watt hours.
Q: for what is this how can I use this on my eachine e119
gefragt von BG104812737 auf 2021-09-06 07:10:56
BJR981S This allows you to use a futaba compatible transmitter to fly your E119. It is a Futaba Compatible S-FHSS rx that plugs into the flight controller. The EAChine radio that comes with this helicopter in a RTF option is fairly low quality. By adding this additional RX it allows you to use a better quality Futaba compatible radio. This also includes the radios with the 4 in 1 modules like the RadioMaster TX16S.
2021-09-06 09:48:17 Hilfreich (1)
Vervelmlc3112 receiver(compatible with S BUS/DSM/DSMX receiver port) and the native protocol is OMP protocol
2021-08-05 10:19:56 Hilfreich (1)
BJR981S Fromthe picture it looks like its not a Max so it does not come with a folding handle.
Q: Hello, where to place is this part for? How to does it works.
gefragt von PandaMan auf 2021-06-02 10:30:37
BJR981S You put it inline between your battery and load e.g. Battery to ESC. If the ESC shorts out with a fault it prevents your battery from exceeding current maximums and starting a fire.
2021-06-03 01:18:01 Hilfreich (0)
BJR981S Because it measures the voltage so it knows the range of 1s 2s 3s.
2021-04-08 07:27:46 Hilfreich (0)Q: If something pulls on the wire, will the connector disconnect or stay clamped?
gefragt von BG241419144 auf 2021-03-21 10:03:48
BJR981S If you pull too hard it will break the wire connection. But it would have to be hard. You can get protectors for the male end, but nothing for the female.
2021-03-21 11:49:17 Hilfreich (0)Q: how do I physically bind this to my Futaba 14SG. Do I need to push any buttons or what
gefragt von BG550381841 auf 2021-02-10 12:28:42
BJR981S Set up a new model in your radio. Set up in your linkage menu FHSS. Power up the heli, press link on the radio and press the button on the RX. I have 3 set up this way. I have model files for my 18SZ they would not be compatible with your 14SG.
2021-02-10 11:14:06 Hilfreich (0)Q: Is that heli compatible with Walkera Devo transmitter, if I use a Walkera sbus reciver?
gefragt von boka auf 2021-01-17 01:07:48
BJR981S Yes it is it will work on SBUS or PPM. You will need to check your SBUS Rx that it can support both normal and reverse SBUS. This has been an issue for some flight controllers. Use PPM if in doubt. It also supports DSM2 Rxs. Its a great heli to learn 3D. It's almost indestructible.
2021-01-17 02:45:12 Hilfreich (0)
BJR981S Here is the best I can offer in Advice.For the aircraft you will need.Motor, ESC, and propeller, plus covering (Iron On) material. Epoxy Glue and CA Glue.Paint and Vinyl Sheeting for the livery that you will need to cut out of the sheet.Standard Size Servos x 4. LiPo battery and charger.For the RC you will need a radio at least 4 channel would recommend RrSky Taranis with a 4 Channel RX.Everything else is in the kit.Most of this can be bought here.
2021-01-10 02:49:55 Hilfreich (1)Q: what radios will this item work with?
gefragt von Skippy auf 2020-07-24 08:56:04
BJR981S This will bind with any Transmitter that is FlySky AFHDS compatible. If you have a different transmitter, then just remove the RX and replace the RX with an SBUS, PPM, to SUMD receiver that is compatible with your Transmitter. You cannot use a PWM only Receiver.
2021-01-01 05:15:02 Hilfreich (0)
Glitter i have no idea
2020-07-05 08:50:14 Hilfreich (0)
due44 dji is only kompatibel with beta flight osd
2020-03-27 12:17:12 Hilfreich (0)Q: For K120? 3 Forward? 3 Opposite?
gefragt von WAR1029 auf 2019-12-14 11:17:24
BJR981S Neither. They do not fit in a K120. I have tried.
2020-02-24 02:26:33 Hilfreich (0)Wir laden Sie herzlich ein, die E-Mail mit der Einladung zur Antwort zu abonnieren!
Wenn Sie sich anmelden, werden wir Sie per E-Mail einladen, um Fragen zu Produkten zu beantworten. Wenn Sie sich anmelden, erhalten Sie auch das "Hilfreiche Abzeichen"! Sie können sich jederzeit auf der Seite mit den Datenschutzeinstellungen abmelden.
Helfen Sie anderen und seien Sie glücklicher!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
BJR981S FlySky Supports AFHDS protocol not S-FHSS. So natively it will not bind.
2022-09-13 01:18:31 Hilfreich (0)