Alle Nachrichten

Stefan With a 1% 10 kOhm thermistor, the reference temperature is 4 degrees Celsius below the clock. The software would then have to be changed.

2020-10-09 07:37:32 Hilfreich (0)
Vorlegen
Antworten (2)

Q: would it be possible to get a review copy to assemble and review?

gefragt von Websteria auf 2019-09-15 01:23:38

Wisent maybe it is ok

2019-09-20 03:57:20 Hilfreich (0)
Vorlegen
Antworten (1)

Websteria This is a big problem. I think quality control on these chips is bad. I got maybe 2 out of 10 that didn’t have a problem.

2019-09-15 01:34:17 Hilfreich (0)
Vorlegen
Antworten (4)

Q: I NEED THE SCHEMATIC !!!

gefragt von WannaDuino auf 2018-08-20 01:26:28

Websteria This is essential for troubleshooting. I can’t believe a kit company wouldn’t release a schematic for a kit?!! How are we supposed to learn from this circuit?

2019-09-15 01:28:12 Hilfreich (0)
Vorlegen
Antworten (2)

Websteria You may have a bad mcu or the blue shorted to something else on the led side. All the anodes are tied together so a short at one would appear on all. Also just confirm all your mcu pins are soldered well.

2019-09-15 01:25:27 Hilfreich (1)
Vorlegen
Antworten (3)

Websteria Did you ever get this fixed? My first digit won’t turn on either. Everything else works. It seems to mirror some other digits but only on like 6-7. So weird. Checked every component. About to give up and hot air remove the mcu and respolder it. Pity. Beautiful clock for the rest of it.

2019-08-31 02:53:47 Hilfreich (0)
Vorlegen
Antworten (2)