theuglycamel
meine Inhalte
Alle Nachrichten
Bewertungen
Bewertungen
Antworten
Fragen

Alle Nachrichten

25 g digitales Servoloses Metall-Einziehfahrwerk für Flugzeug KTK
US$13.50 US$17.99

Q: Hello. Anybody Knows if this one fits in the Durafly Bf-*****mm wingspan?

gefragt von rivarella auf 2020-12-30 07:50:50

theuglycamel Should work just fine, used mine on a 1m ft cruiser.

2020-12-30 08:05:21 Hilfreich (0)
Vorlegen
Antworten (1)
Racerstar REV35 35A BLheli_S 3-6S 4In1 Brushless-ESC mit integriertem Stromsensor und Unterstützung von DShot600 für RC Drohnen FPV Racing
US$41.99 US$37.99

Q: I’m building a drone and don’t wana buy a 73 dollar ESC and flight controller combo is this a good alternative?

gefragt von BG465754452 auf 2020-10-21 06:59:22

theuglycamel Absolutely, running sunnysky 2307 2700 KV on a 630g rig. No issues with bidirectional dshot either.

2020-10-21 01:24:52 Hilfreich (0)
Vorlegen
Antworten (2)
theuglycamel 11/12/2019
Excellent packaging and shipping time. This is my first PNP wing and I'm VERY impressed. Everything fit perfectly and the EPO is very very strong. There's tons of room for flight controllers/batteries/VTX. I'm setting mine up on an APM FC and hoping to make this my first waypoint autopilot rig. A+++
Sonicmodell AR Wing 900mm Spannweite EPP FPV Flywing RC Flugzeug PNP
US$177.09 US$184.79
1
Empfehlungen
Kommentar (0)
MAMBASYS F405 MK2 Betaflight Flugsteuerung F40 40A 3-6S DSHOT600 FPV Racing Brushless ESC 30.5x30.5mm
US$96.99 US$119.00

Q: Can I put a Beitian BN-880Q GPS module on this board and where do I need to solder it ? (TX ? RX ?) thx

gefragt von parveauadrien auf 2020-01-17 08:49:26

theuglycamel Yes, that model will work. opposite of the USB, there are connections for scl sda, these connect to the compass, next to scl is the ground, 5 volt, tx and rx for the GPS. Remember tx goes to rx and rx goes to tx. You'll want to set the uart for GPS once you're wired in.

2020-01-17 09:03:19 Hilfreich (0)
Vorlegen
Antworten (4)
Hawkeye Firefly 160 Grad HD 1080P FPV Micro Action Kamera Mini Cam DVR Eingebautes Mic für RC Drone
US$24.09 US$30.00

Q: Can I take live feed via USB to a computer onboard? I need it for image processing purposes. Or over WIfi?

gefragt von aatmadeepaarya auf 2019-01-15 04:21:09

theuglycamel Yes,There is quite a bit of latency over USB but it will work. No WIFI options though.

2020-01-15 12:37:45 Hilfreich (0)
Vorlegen
Antworten (1)
theuglycamel 13/01/2020
Can't say anything bad about the oldest pdb on the market. works great and easy to solder.
Matek Systeme PDB-XT60 W / BEC 5V & 12V 2 Unzen Kupfer Für RC Multirotoren
US$11.49 US$11.99
0
Empfehlungen
Kommentar (0)
theuglycamel 13/01/2020
This is currently my favorite airplane by leaps and bounds. After I trashed the PNP version, I purchased a kit version to replace the broken bits. On that point, this plane is the toughest wing I've ever flown. I love blasting through trees and nose diving into the ground at Mach OMG. The only thing that could destroy this thing was a full throttle run through a barbed wire fence. Even then it was fixable, just a bit lopsided. Currently I'm running the stock ESC (FlyColor 30a w 3aBEC) on a Sunny Sky 2216 1400KV on 3s. I run dual Ovonic 2200 MAH and get close to 25 min of flight time if I stay out of the throttle. The ESC is a little light for this motor on 4s but I have yet to see the need. I also run a HK AMP 2.7.2 Flight stack with PDB, OSD/Telemetry board, and An AKK 1000mw VTX. Even with this old 8 bit FC I can run auto takeoff, flybywire, return to home, mission planner, and acro/stabilize modes.
Sonicmodell AR Wing 900mm Spannweite EPP FPV Flywing RC Flugzeug KIT
US$99.99 US$155.99
0
Empfehlungen
Kommentar (0)
theuglycamel 13/01/2020
These are SUPER small cameras. I hated the fixed CMOS camera on my Fat Shark shark quad so I cut the factory camera out and mounted this one in its place. Not only is this camera WAY clearer than the factory, I think I saved a gram or two. I didn't mount this on an adjustable mount, but adding 30 degrees of up-tilt made this quad a blast to rip. I'm using my second camera on a servo gimble on the top of my AR Wing. I'm running a three way switch so I can change between my FPV camera, my HD camera, and this one. It's so light the wing acts like it's not even there. My tiny 3.7g servo is heavier than this thing! Don't be fooled by TVL lines. I've got cameras rated for 1500TVL that look worse than these do. It does have some lighting issues but that's to be expected on a bare bone CMOS camera. This is a great camera for a toothpick build or a sub 250g fixed wing FPV rig.
1/4 CMOS Mini FPV Kamera 600TVL 1,8 mm FOV 170 Grad Weitwinkel PAL / NTSC 5V-12V
US$14.29 US$15.59
0
Empfehlungen
Kommentar (0)
theuglycamel 13/01/2020
Exactly what you need for running OSD and 915/433mhz telemetry on an older APM. I'm using an APM Mega 2.7.2 minimOSD and a FPVDrone 3dr 915mhz telemetry kit, and this works perfectly. Well made and well packaged. Plug and play without any configuration necessary.
APM 2.5 APM 2.6 Digital / OSD Telemetrie Y-Typ-Kabel
US$8.99
0
Empfehlungen
Kommentar (0)
theuglycamel 13/01/2020
Not a very popular item as APM 2.8 and below aren't supported by mission planner anymore. However, some of us like the challenge of building a 2014 aircraft and making it do all of the tricks (and more) than newer F4/F7 boards. The cables are well made and extra long for any type of setup. If you're purchasing these because you don't have any of the factory cables, buy two sets as you'll need both ends for telemetry and PDB connections. Also, be extra careful un-pinning these connections, the retainer tabs do snap off easily.
Drahtkabelsatz für Mini MiniAPM APM V3.1 Flug Steuerpult
US$13.19 US$14.99
0
Empfehlungen
Kommentar (0)
theuglycamel 13/01/2020
I purchased the 2.5mm to go on my Fat Shark 900tvl Cmos. Looks great, no fisheye and focused very clear. Major improvement over my 2.8 I was running. Using this on a Sonicmodel AR Wing 900mm.
2.5mm / 2.8mm 600TVL 1/3 "Super Had II CCD-Kamera IR Sensitive Ersatz-Kamera-Objektiv für HS1177
US$3.95 US$9.59
0
Empfehlungen
Kommentar (0)
theuglycamel 13/01/2020
Beautiful well balanced props. I've smashed them into walls all weekend without any breaking. I'm using them on a FatShark Shark quad with 8250 brushed motors. Lots of low end torque, quiet and very smooth. Definitely will be buying more!
4 Paare GEMFAN 65mmS 65mm 2-Blatt 1mm/1.5mm Loch Propeller für Toothpick RC Drone FPV Racing
US$8.07 US$8.99
0
Empfehlungen
Kommentar (0)
theuglycamel 13/01/2020
Do exactly as they were designed to do. I use one on my patch antenna (cap lhcp to get full rhcp). I use the other on the bench when powering up my VTXs without an antenna. Shipped fast and work great!
2 Stück SMA Male RF Koaxiale Lastwiderstand Beendet Dummy Load 50 Ohm Für FPV RC-Drohne
US$8.79 US$9.59
0
Empfehlungen
Kommentar (0)
theuglycamel 13/01/2020
Excellent lightweight servos. Gearing is smooth and resolution is flawless. Comes with every type of servo horn imaginable. I'm using two of these for elevons for my Soncimodel AR Wing 900 and they blow the stock servos away. Improved responsiveness and rigidity in top speeds flights. These are my new favorite 9g servos!
JX PDI-1109MG 9g Metallgetriebe Kernmotor Micro Digital Servo für 450 RC Hubschrauber
US$12.64 US$13.99
0
Empfehlungen
Kommentar (0)
theuglycamel 08/01/2020
Very well made 3D print. Fits perfectly, super light and flexible. No jello whatsoever. Will definitely be buying more.
1 stück 25 * 40 * 43,5mm 25 grad tpu schutzhülle für Hawkeye Firefly micro sport kamera rot / blau / orange
US$3.04 US$6.13
0
Empfehlungen
Kommentar (0)
Sonicmodell AR Wing 900mm Spannweite EPP FPV Flywing RC Flugzeug PNP
US$177.09 US$184.79

Q: what’s the best controller for this plane?

gefragt von AlexanderMcMyn auf 2019-06-17 04:14:28

theuglycamel It'sreally a matter of opinion. I'm partial to Arduplane so went with an older apm setup. The most popular would be the Matek f405 or f411. Both are excellent flight controllers and should have plenty of room to mount.

2020-01-07 12:22:24 Hilfreich (0)
Vorlegen
Antworten (1)
1/4 CMOS Mini FPV Kamera 600TVL 1,8 mm FOV 170 Grad Weitwinkel PAL / NTSC 5V-12V
US$14.29 US$15.59

Q: I got the cameras without adaptive cable, can I connect it directly to 12v without burning anything?

gefragt von FRodrigues auf 2019-05-30 09:57:10

theuglycamel Yes,any dc 5-12v source will work.

2020-01-07 12:20:02 Hilfreich (0)
Vorlegen
Antworten (1)
theuglycamel 07/01/2020
By far the best flight stack for the money. The layout is simple, and easy to solder. The osd is effortless and the provided stack is very robust. You simply cannot find a ready to mount 6s rig for this price. My only complaint would be blheli-s instead of blheli32, but Betaflight now supports rpm filters on blheli-s so no big deal there. I've been running Betaflight 4.1 on a 680g aluminum 5" quad. Even with the weight I rarely get close to over-amping the esc. As long as they keep selling these, I'll keep buying them.
MAMBASYS F405 MK2 Betaflight Flugsteuerung F40 40A 3-6S DSHOT600 FPV Racing Brushless ESC 30.5x30.5mm
US$96.99 US$119.00
0
Empfehlungen
Kommentar (0)
theuglycamel 06/01/2020
This is by far my favorite HD cam for fpv. Although its not 4k, the image quality is great and the camera is SUPER light. I have this setup to swap between my AR Wing and my Kraven 5" freestyle "cruiser". Its so light you can't even tell it's on the quad. I also have it wired in to a 3s on my wing so I can get longer record times. This also allows me to transmit the HD feed separately from my FPV camera for spectators to use. All you need to do is modify the charging cable that comes with the camera and add a cheap vtx to the video out. Best of all, if you bust it, it's only 25 bucks! FYI be sure the camera is fully charged if you want to wire it into your main battery pack. If not, the camera will enter charge mode when connected and draw quite a few amps.
Hawkeye Firefly 160 Grad HD 1080P FPV Micro Action Kamera Mini Cam DVR Eingebautes Mic für RC Drone
US$24.09 US$30.00
0
Empfehlungen
Kommentar (0)

Sie sind der Experte, können Sie helfen?

Wir laden Sie herzlich ein, die E-Mail mit der Einladung zur Antwort zu abonnieren!

Wenn Sie sich anmelden, werden wir Sie per E-Mail einladen, um Fragen zu Produkten zu beantworten. Wenn Sie sich anmelden, erhalten Sie auch das "Hilfreiche Abzeichen"! Sie können sich jederzeit auf der Seite mit den Datenschutzeinstellungen abmelden.

Helfen Sie anderen und seien Sie glücklicher!

  • Abonnieren

Über Abzeichen

Abzeichen sind mit der Community verbunden, und Benutzer erhalten Abzeichen, indem sie hochwertige Inhalte erstellen, Missionen abschließen oder an speziellen Aktivitäten teilnehmen. Bestimmte Personen haben auch ihre eigenen exklusiven Abzeichen.
CEO-Abzeichen

das ceo badge gehört nur dem chef von banggood.

Abzeichen, die Sie verdienen können, folgen in Kürze
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe