Alle Nachrichten

Krotow I definitely tried to fly my R349 in stock configuration with 4S 1500 mAh Turniq Graphene 75C battery. R349 coped with it... eq it was possible to fly, however it acted as flying cow and required high throttle and quite sharp turns to move somewhere. Best batteries for R349 in stock configuration turned out 650-850 mAh 75+C batteries. 3S for comfy casual walking through trees and mild freestyle. And 4S for freestyle and racing. Largest more or less comfortable capacity was 1100 mAh. All above is already too heavy.

2020-08-27 04:11:34 Hilfreich (0)
Vorlegen
Antworten (2)

Q: What type of antenna should I use SMA or RP-SMA?

gefragt von matt auf 2020-07-14 08:56:12

Krotow Use antenna with SMA connector for bundled pigtail cable. Or you can use antenna with MMCX connector and connect it directly to this VTX.

2020-07-15 02:58:45 Hilfreich (0)
Vorlegen
Antworten (2)
Krotow 2020-06-25 15:04:40
0
Empfehlungen
Kommentar (0)

Top-Rezensenten, die Ihnen gefallen könnten:

Q: How to charge this battery with ISDT Q8?

gefragt von Valerii auf 2020-05-30 02:00:01

Krotow Use balance charger board. Stock board for ISDT Q8 charger is here https://www.banggood.com/XT60-Plug-Parallel-Charging-Board-For-ISDT-Q8-D2-Q6-T6-Lite-ToolkitRC-M6-M8-Charger-p-1091255.html You will also require some XT60 to JST adapter. Simpliest one https://www.banggood.com/1-Pair-XT60-Male-Female-Plug-To-JST-Plug-Adapter-Connector-p-1075493.html or a bit more ubiquitous https://www.banggood.com/XT60XT30FatsharkJST-Plug-Charger-Cable-XT60-Input-for-Battery-Charger-p-1415241.html

2020-05-31 05:27:44 Hilfreich (0)
Vorlegen
Antworten (2)

Q: vem com manual de estalação para o radiolink, at10 12ch?

gefragt von BG494844981 auf 2020-05-11 08:57:28

Krotow This particular module is supposed for use in models without flight controller (planes and helicopters) to provide main battery voltage telemetry back to transmitter (AT9, AT9S, AT10, AT10S). See the picture in product page how to connect PRM-01 module and receiver. Also youtube has a video about how to connect PRM-01 as well. External links are forbidden here, search for "Radiolink AT10 PRM-01 Telemetry Module".

2020-05-19 03:36:00 Hilfreich (0)
Vorlegen
Antworten (1)

Q: Why is the processing time so long for CN warehouse

gefragt von shanzidshaiham auf 2019-03-11 04:00:33

Krotow Dependsfrom availability in manufacturer warehouse from where particular prodiuct come. At this year also due to COVID-19 and subsequent quarantine.

2020-05-19 03:26:09 Hilfreich (0)
Vorlegen
Antworten (1)

Q: Does this work with frsky DJT?

gefragt von aponkratov2005 auf 2020-05-11 04:16:20

Krotow Should work. Switch receiver mode in flight controller to FrSky D (8 channels). For extra settings tweak Betaflight configuration to have more "channels" over 4 AUX ones. Mine Mobula 7 in D8 mode now have 10 "channels" and telemetry in such way.

2020-05-11 09:34:06 Hilfreich (1)
Vorlegen
Antworten (1)

Q: Can I bind this with FlySky FS-i6 i6 transmiter?

gefragt von timi123457 auf 2020-04-22 02:48:24

Krotow No, this receiver is for use with Frsky transmitters. You need FlySky AFHDS or AFHDS 2 compatible receiver. X6B, Flit10, Fli14+ for example.

2020-04-22 07:33:12 Hilfreich (0)
Vorlegen
Antworten (4)

Q: does it convert the voltage?

gefragt von Dan1985 auf 2019-02-16 12:08:16

Krotow No.It works as easy way connector between 2S-4S balance connectors and googles. Real voltage regulator location is inside googles.

2020-03-29 05:46:28 Hilfreich (0)
Vorlegen
Antworten (1)
Krotow 2018-10-22 20:37:43
Ordered this hot air soldering gun for my DIY board SMD component soldering and RC hobby module repairs. Was not mistaken - it works. External compressor allow to blow much larger air volume against lesser hot air guns with fan in handle. This extra air allow to remove and and solder in larger components too very easy. Air blowing at slower speed prevent blowing away components around soldering spot and melt wires and capacitor insulation nearby. Tried to solder anything in and out: SMD resistors and capacitors - check. Inductances - check. Diodes and transistors - check. SMD LDOs like LM78D15... and large FETs - check. SOP, QFN, QFP and LQFP ICs - check. Didn't tried BGAs yet by seen that they are reachable with this gun too. But use good flux like RMA-218 for SMD component soldering. Compatibility: Soldering paste - check. Regular solder - check. ROHS - check. Heat tube shrinking - check (temp no more than 150 degrees. To RC hobbyists - this gun appeared very nice in XT60 connector soldering even for thick 12AVG wires and to solder 12AWG wires to board. Was easier than with soldering iron. Extras: Have 4 replaceable nozzles. When handle is put back into the holder, device automatically cool down and goes into standby and back to working mode when handle is not in holder. Compressor is not loud on speed under 5 (for me it mean always :) Seems very good budget product, especially for this price. Had a little surprise when received this soldering gun with Australian mains plug and adapter for EU mains socket. It works from our 220V/50Hz without problems. Because ground connection in adapter is missing (it have ground contacts for socket and plug, but they are internally disconnected), I will replace plug to EU plug later.
4
Empfehlungen
Kommentar (0)

Top-Rezensenten, die Ihnen gefallen könnten:

Krotow 2018-08-16 20:46:41
1
Empfehlungen
Kommentar (0)

Top-Rezensenten, die Ihnen gefallen könnten:

Krotow On purchase keep in mind that EV200D have RP-SMA connectors. Antennas with SMA connectors can be attached only via SMA to RP-SMA adapters.

2019-03-24 08:00:37 Hilfreich (0)
Vorlegen
Antworten (4)

Krotow It is a great universal battery. Plug white balance connector into QX7 transmitter or black Jack connector plug into googles (Fatshart, Aomway, Skyzone, Eachine, etc.).

Mar Lin 2018-09-17 03:29:32
3
Kommentar (3)

Q: Is there a way to disable to beeping?

gefragt von NickH auf 2018-07-21 04:51:23

Krotow If beeping annoy your family in night, glue buzzer hole shut with a piece isolation tape. It will bebome quiet but still audible.

2018-11-02 10:44:36 Hilfreich (0)
Vorlegen
Antworten (2)