Alle Nachrichten

Q: What is the native resolution of the front camera / side camera?

gefragt von agaton auf 2020-09-10 03:09:58

Almokhtas الدقة: الرأس الأمامي: 1280*720، 640*480 الرأس الجانبي: 1280*712، 640*412

2021-11-16 02:49:11 Hilfreich (0)
Vorlegen
Antworten (2)

BG101193121 No. Radiolink are propriety receivers and will only work with radiolink transmitters

2021-11-03 08:25:41 Hilfreich (0)
Vorlegen
Antworten (2)

Q: Is the shaft/stem that you clamp on 8mm?

gefragt von agaton auf 2019-07-29 12:55:35

xradiomusicx si il gambo è 8mm

2021-10-23 03:05:12 Hilfreich (0)
Vorlegen
Antworten (2)

Q: Is the reservoir on the shock real or just for decoration?

gefragt von agaton auf 2020-10-19 03:45:48

lmml The black part has shock oil inside it,not just for decoration

2020-11-02 02:21:08 Hilfreich (0)
Vorlegen
Antworten (1)

agaton The mistake was yours. It clearly says that it's a 6mm shank. And then you of course blame banggood 🤔

muc 21/09/2017
0
Kommentar (1)

Q: will this work with a 1/8 scale truck

gefragt von BG044781527 auf 2020-05-16 09:46:40

agaton Yes, it will

2020-10-18 02:35:22 Hilfreich (0)
Vorlegen
Antworten (2)

Q: What length are they?

gefragt von Alexandra auf 2020-07-15 01:43:42

agaton I measured in the picture, and it seems that the C-C dimension is about 96mm

2020-10-16 08:44:46 Hilfreich (0)
Vorlegen
Antworten (2)

Q: Can someone please explain the before and after pictures?

gefragt von henrivdr auf 2019-05-01 09:56:36

agaton No. But this looks promising: imgur,com.gallery.YhFAcj3

2020-08-02 01:36:25 Hilfreich (0)
Vorlegen
Antworten (1)

Q: Hey

gefragt von Shayma Amarasinghe auf 2019-04-07 11:22:44

agaton Hey

2020-01-29 03:53:42 Hilfreich (0)
Vorlegen
Antworten (3)

Neptuneflorian Je cherche carré acier dur en ER20 ??

2019-12-30 02:26:36 Hilfreich (0)
Vorlegen
Antworten (1)

Q: where are instructions for programming.

gefragt von Deano auf 2018-12-16 07:56:46

agaton Setting procedure 1. Disconnect the module power supply, press and hold the setting button until powering the power module. Display shows the current power setting parameters; 2. Press the setting button to select P / L / F ,(P = 12V lead acid, L = 3.7V lithium battery, F = 3.2V lithium iron phosphate battery); 3 press the function key to set the number of the battery string, according to the function keys and set the key up or down to choose the number of batteries in series; 4. Press the function key for a long time to enter the advanced setting interface, use setting key to select S1-S5, enter key to select or cancel the current mode; 5. Reenergize the power after setting. The power automatically saves setting data. E.g. 10 lithium battery power, turn on power percentage and voltage automatic rotation display (S1 mode) Operation: Disconnect display module power, press and hold the setting button, power the power module, press the setting button for a short time to select L, press the function key to select 10, press the function key for a long time to select S1 and re-power.

2019-12-17 09:34:38 Hilfreich (0)
Vorlegen
Antworten (5)

agaton I have been quite surprised to receive the package and try it, it sounds enough for a small boat, although it is better, once the sounding is launched, it does not stop even if you cut the channel switch of the station, it still works for about 4 seconds, The system consists of three elements, the speaker a small amplifier of just over 1 Watt and the noise generator with the electronic channel switch, is curious and works well

garver 27/12/2017
1
Kommentar (1)

Q: Haha! He looks like a granny 😄

gefragt von agaton auf 2018-11-24 04:22:35
Vorlegen
Antworten (0)