Alle Nachrichten

Bricola wujiahui : No, this LED module does have polarity ! You may look for datasheets like, for exemple RWL-R1025BB or YSLB-10251B5-10. The positive is on the side where the type is written on.

2022-05-23 08:46:08 Hilfreich (0)
Vorlegen
Antworten (3)

Q: do you have a diagram and a parts placement drawing?

gefragt von pa5cw auf 2019-02-08 01:28:40

Bricola Hi, schematic can be found, Googgle for HTB1Zt0gRXXXXXcSXVXXq6xXFXXXv.jpg You may watch ' MiddvwiHgI0 ' video on YTB that gives lot of explanations. Hope this can help.

2022-05-23 08:25:14 Hilfreich (0)
Vorlegen
Antworten (3)

Q: what are the values of SMD resistors

gefragt von BG181145725 auf 2020-01-27 10:19:56

Bricola The little SMD resistor is 3Kohms. You will get 2 of them, so one to solder and one as a spare part if you lost or damage it.

2022-05-23 08:07:20 Hilfreich (0)
Vorlegen
Antworten (1)

Bricola Hello,this module is equal to the W3230. I found a Chineese - English manual : that tells P6 = Hight-temperature Alarm (-55°C to 120°C Factory is 120°C) , P7= Data Lock (On-Off Factory is OFF) , P8 = Factory Reset (On-Off Factory is OFF). Hope this help.

Sanyee73 03/11/2021
3
Kommentar (5)

Q: هل تعمل مع 12فولط 23امبير

gefragt von BG101714141 auf 2021-11-10 08:29:05

Bricola Hello, if you mean to power the input of the RD6018, it will work (input range power supply 6 to 70V) but the output is going to be under 12V (it is a step down module) and max current is 18A. It is recommended to use the suggested power supply 60V 1080W to have the right efficient PSU.

2022-02-20 03:12:32 Hilfreich (0)
Vorlegen
Antworten (2)

Bricola Hello, regarding the specs , the DC power input range is 6 to 70V, so 68V is ok. The 1000W is ok too, with an efficency of 95% (only exemple) the max power output is going to be about 950W .

2022-02-20 03:02:23 Hilfreich (1)
Vorlegen
Antworten (1)

Bricola Hi, schematic can be found, Googgle for HTB1Zt0gRXXXXXcSXVXXq6xXFXXXv.jpg . Only one of the two SMD resistor is needed, the other one is a spare part. This resistor has to be placed on the plate just under the version of the board ( by exemple V5.0). The other plates are for ' switch ' functions. Please note for the LED display, the common is positive and located at the written type. You may watch ' MiddvwiHgI0 ' video on YTB that gives lot of explanations. Hope this can help.

2022-02-19 05:19:06 Hilfreich (1)
Vorlegen
Antworten (4)

Q: What type of usb cable does it use. I have a mini usb but it does not fit.

gefragt von BG353932150 auf 2022-02-17 12:56:48

Bricola Micro USB is required. It is on Page 6 of the Instruction Manual (click on the "RD6018(W) operation instructon: Click here to open" to get the Manual).

2022-02-17 02:45:58 Hilfreich (1)
Vorlegen
Antworten (2)

Q: whats excellway?

gefragt von BG203611341 auf 2022-01-11 01:15:25

Bricola Excellway is the brand name. Do not understand your question.

2022-01-11 03:14:14 Hilfreich (1)
Vorlegen
Antworten (6)

Bricola The recommanded Power Supply is written into the description, pont 6. See article ID 1750643. It is a 65V (70V) 11.4A 800W.

2021-12-25 07:27:53 Hilfreich (0)
Vorlegen
Antworten (2)

Q: Please what diodes are recevier ? Black or white

gefragt von Tomáš Zadražil auf 2021-11-02 10:45:37

Bricola Black = Receiver - White (clear) = Emitter

2021-11-04 05:16:09 Hilfreich (0)
Vorlegen
Antworten (2)