Alle Nachrichten

Kalli 24/06/2020
First about my feelings before and after the buy: Initially I doubted to buy this microscope. normally I use my simple stereo binocular zoom for checking out failures or problems on pcb's. but more often I use the binoculars, more often I thought of buying something better. I saw this somewhere on youtube and thought this might be the solution. Because it was expensive I though, should I invest money for a thing that I'm not going to use that often (10 x in a month or so) but said, Bismillah and bought it anyway. I had this strange feeling about spending so much for this until the last moment. the package was arrived and I started to assemble it, the more I was busy the more I realized that this was a great expansion to my hobby and how nice it is to have it. after fully assembling, I started to test with the 0,5 lens, it was like, WAUUW, masaAllah it is great and then went to 2,0x lens then I thought I am very glad that I bought this. This is probably one of the best items I bought for my entire hobby for the last 23 years and I am very happy with it. Especially the lens quality, the clearity and the brightness of the light to see almost everything so clear that you are surprised!!! I will definitely recommend this to ANY one who is hesitating to buy for your job or hobby, now the facts: the microscope was well packed in styrofoam and the articulating arm also, the rest was like put in the box where there was a gap. led light, C clamp, camera and the 3 lenses where in a small box with foam but the USB cable and hdmi cable were loose in the box in a plastic zipbag. I had the feeling that they were good protected. package was a little dent but thats DHL not BG. a big chunk of styrofoam was broken but probably didn't effect the items. everything was nicely bagged. the microscope with the oculars and the arm nicely packed. The arm is very sturdy. There are eyepieces and they are very good. very nice to have them. Thank you BG, I am very happy with the entire set!
2
Empfehlungen
Kommentar (1)

Martin This is a lithium ion battery, not a lithium polymer type. Specs differ due to different technologies.

2021-04-29 06:52:12 Hilfreich (0)
Vorlegen
Antworten (1)

Kalli how did you come to the conclusion that it is 1W actually? have you done long range with it?

tormee 29/06/2020
3
Kommentar (2)

dengjunbao the module compatible access accst protocol,but the receiver is access protocol,the x9d plus 2017 version is not work,tx16s will be compatible

2020-06-12 02:15:00 Hilfreich (0)
Vorlegen
Antworten (1)

Q: Do you have this set without the camera? I don't need the camera.

gefragt von Kalli auf 2020-05-20 08:58:51

Chorog It is recommended that you look for products in this category, there are many types of microscopes to choose from. https://www.banggood.com/Wholesale-Optical-Instruments-c-2418.html?version=1&from=nav&akmClientCountry=CN

2020-05-25 08:51:44 Hilfreich (0)
Vorlegen
Antworten (1)

Kalli Yes it will work, i got it installed on my digooeye app and my synology nas: this is what was needed: ipadres: “cameraadress” port: 554 brand: userdefine source /onvif1 user: admin and your camera password you can set

2019-03-19 08:43:49 Hilfreich (0)
Vorlegen
Antworten (3)
Kalli 02/05/2018
This board is a very good alternative for you split1 camera if you have the same issue like I do, my power button was not working anymore like hundreds of others. I solved my issue with this one and mailed runcam customerservice for a replacement. they are checking into it and hopefully they will send me new one. this version comes with the cable presoldered for the Vin(5-17v)/videoOUT/GND so if you are changing your split1 board for this one, it's plug and play but you have a 5 cm cable sticking out.the connectors and buttons are on the same side as the split1 and is nice because of the dependencies of your quad (XT60 or mounting poles) the one thing i don't like on this is the SD card push in/out because when the card is pushed in, you can just pull it out with a very little force. wonder what happens in a crash. BUT if you bought the original split2 set, there is a bracket that holds the sd card so this is not an issue for those people (only for those who upgrades from a split1 board to this) You don't need a specific 5V regulator for this anymore because Vin is now 5-17 volts whereas the split1 board was only 5V or 4.2 on the soldertab so that is nice. the wifi module is a great improvement beucase it's horizontal and narrower so fit's most quads (like a micro USB cable but a little wider) works as the same as a split 1. I also use the TX-RX solder tabs to control the camera functions with my taranis X9D+ it works flawless (also with split1) if you make it a habbit you can stop the recording each time you land without compromising the recorded video when pulling the power cable out. this should not be a problem because the split will end and store the video properly but you never know. Please be carefull when you use your transmitter to control your camera because if you flip the wifi button on accident while flying, YOU WILL CRASH because wifi will not start and the camera shuts off. I put the wifi function on my turning knob on my taranis so I cannot flip a switch accidentally> I have to turn the knob fully to the right which is almost impossible when flying.
0
Empfehlungen
Kommentar (0)