BG571117144
meine Inhalte
Alle Nachrichten
Bewertungen
Bewertungen
Antworten
Fragen

Alle Nachrichten

BG571117144 18/02/2026
A fabulous little torch that's nice to use. Beam functions include rapid flashing and morse code. Rechargeable via C-Type USB cable.
Astrolux® EP03 2050LM LH351B LED Superhelle Taschenlampe mit 8 Stunden Laufzeit, wiederaufladbar über Typ-C mit 18650 Akku, wasserdicht nach IP67, Notfall-Campinglaterne
US$20.84 US$39.90
0
Empfehlungen
Kommentar (0)
BG571117144 18/02/2026
I like these a lot. Made from hard durable plastic. Useful for painting, sanding and numerous other uses. I am very satisfied with my purchase of this item.
8PCS Arbeitsbank-Hundeklappe 19mm 20mm EVA-Gummibank-Hundewerkzeug für Arbeitsbanklöcher Rutschfest
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 06/02/2026
In my opinion this would have been a superb clamp had it not been let down at the design stage. The overriding problem with this device involves the simple issue of the underside of the clamp end cap not being parallel with the underside of the clamp body. In fact it sits at least 4 mm higher. This 4 mm gap is what is facilitating the unwanted up and down rocking motion about it's pivot point. In use, when force is exerted against the clamping face, the pivoting causes the tail end of the device to pivot down and consequently the clamping face to lift up and so to the workpiece being clamped. I feel pretty certain that if the underside of this end cap was made to align with the underside of the clamp body, it would go a very long way to minimise tendency of the device to tilt backwards when the clamping forces are applied. In my opinion this small alteration would undoubtedly make it the clamp it should have been. Fortunately for the consumers who have already purchased this clamp the tilting issue is very easily resolved by attaching a 4-5mm spacer to the underside of the tail end cap which prevents the jaw end of clamp from being tilted upwards by the basic mechanics of pivoting. With this in mind, and with the simple alteration I have made, I am now of the opinion that these New surface clamps are indeed a true and worthy rival to the Bessey clamp. In short, the manufacturing quality of this clamp is superb and IMO is well worth the minor adjustment that is needed to make it better.
Neue 2PCS / 4PCS MFT Tischklemmen Bench Dog-Klemmen Schnellspann-Ruckfreigabe Speed Squeeze Holzklemme für Arbeitstisch 20 mm Dog Hole
US$48.99 US$73.99
0
Empfehlungen
Kommentar (2)

BG571117144 After double checking it appears my initial quote of "at least 4mm" is perhaps a slight over estimation. However it is at least 2mm. Please accept my apologies.

BG571117144 06/02/2026
In my opinion this would have been a superb clamp had it not been let down at the design stage. The overriding problem with this device involves the simple issue of the underside of the clamp end cap not being parallel with the underside of the clamp body. In fact it sits at least 4 mm higher. This 4 mm gap is what is facilitating the unwanted up and down rocking motion about it's pivot point. In use, when force is exerted against the clamping face, the pivoting causes the tail end of the device to pivot down and consequently the clamping face to lift up and so to the workpiece being clamped. I feel pretty certain that if the underside of this end cap was made to align with the underside of the clamp body, it would go a very long way to minimise tendency of the device to tilt backwards when the clamping forces are applied. In my opinion this small alteration would undoubtedly make it the clamp it should have been. Fortunately for the consumers who have already purchased this clamp the tilting issue is very easily resolved by attaching a 4-5mm spacer to the underside of the tail end cap which prevents the jaw end of clamp from being tilted upwards by the basic mechanics of pivoting. With this in mind, and with the simple alteration I have made, I am now of the opinion that these New surface clamps are indeed a true and worthy rival to the Bessey clamp. In short, the manufacturing quality of this clamp is superb and IMO is well worth the minor adjustment that is needed to make it better.
Neue 2PCS / 4PCS MFT Tischklemmen Bench Dog-Klemmen Schnellspann-Ruckfreigabe Speed Squeeze Holzklemme für Arbeitstisch 20 mm Dog Hole
US$48.99 US$73.99
0
Kommentar (2)
BG571117144 14/01/2026
These are great! A bargain 5 five star product. For people who are into fairy lights these are definitely worth the money. The quality manufacturing is noticeably high for product of this type. Numerous modes allow the user to customised the colours to suit the occasion. Took slightly longer than usual to arrive, on this occasion about 12 days.
RSH Smart Tuya Wifi Bluetooth LED-Lichterkette IP65 wasserdicht für Halloween,Weihnachten,Partys und Festivals,leuchtende Lederschnurlichter
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 04/01/2026
Surprisingly good for the price. However, despite all the expected indents being present on the guide, I have a suspicion that the printed angle markings have been wrongly positioned.
ENJOYWOOD Schärfhilfe für Meißel Holzschärflehre für Meißel und Hobel mit einer Breite von 0,12 bis 2,9 Zoll und Schärfwinkelanzeige von 10° bis 45°
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 04/01/2026
Surprisingly good for the price. Just about wide enough to accommodate bench plane blades. Usefulness and convenience of these plates may be greatly improved by attaching them to a sufficiently flat sub-base such as glass or perspex sheet.
200 400 600 1000 2000 Körnung Diamantmesser-Schärfkits,Schleifstein,Schleifen von Küchenwerkzeugen,Waben-,schuppiger Wetzstein
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 24/12/2025
Item as shown. Pleased with initial impression. As yet untested. The top bearings for the two smallest blue coloured flush trim bits are both secured with a tiny nut. This is my first instance of seeing this arrangement so I'm hoping the nuts remain secure in use.
16-teiliges Fräser-Set mit 1/4 Zoll Schaft und Lager, Hartmetallspitzen, Präzisionslager, Stahlwellen, hitzebeständige Beschichtung für Holzverarbeitung, Trimmen, Nuten, Formen
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 20/11/2025
I must say, I really do like this product. I now have 2. The second one was actually a mistake purchase, but in any case, I decided to keep it. So far I've found it to be an incredibly useful addition to my woodwork measuring tools and I've found it to be very accurate and very easy to use. My one complaint about it straight out of the box would be that some of the edges and corners are actually quite sharp due to a lack of final finishing. However, this minor failing can be quite easily resolved by the purchaser care going over the tool slightly with some fine wet and dry sand paper. Having watched a number of Youtube reviews for this item, I have noted many reviewers erroneously suggesting or citing its use to measure and mark accurate 90° angles like a set square. Personally I do not believe this was the manufacturers intended purpose for this tool. I think this tool is much better suited to the task of striking very accurately spaced parallel lines, which in my book it actually does quite superbly.
Schrägbalken-Schneidemarkierungsmaßstab-Markkratzer-Tool für Holzmessung
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 11/11/2025
Very good.
19mm 20mm MFT Arbeitstisch Werkbank Bankschraubzwinge Hund Stopper Holzbearbeitung Werkbank Peg Bremse Stopper Messlatte Zaun
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 08/11/2025
In use Item found to be somewhat fiddly to adjust and secure. However once firmly attached and tightened up with thumb screw, there is no discernable movement noted. The only real issue I had with it concerns the fact that the device was not able to clamp over the thick rear end of my particular Makita trim saw. I resolved this issue by extending the reach of hook by removing the screwed down block assembly and inserting a couple of washers before reassembling it. This was not something I was expecting to have to do but it did resolve the problem. With consideration to these issues I am still happy to score this product with 4 stars, on account of its usefulness, and the fact that this is the still the best quality, for this type of device, that I've seen.
Kreisäge Führungsprofil Aluminiumlegierung verstellbarer Fuß kompatibel mit 4-Zoll-Marmorschneider präzises Schneidewerkzeug Holzwerkzeuge rostbeständig leicht
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 08/11/2025
Good quality but personally I would have liked it to have been a little bit thicker, preferably around 8 mm. In use I will more likely be using it as a template to make 9mm copies out of MDF and using those instead .
6-in-1 Acryl-Holzbearbeitungs-Router-Schablonenführung 6 Stile klare Präzisions-Handwerkswerkzeug kompakt leicht für DIY-Projekte
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 11/10/2025
Very pleased with purchase. I could find no fault with it whatsoever.
ETOPOO 100x70 mm Maschinenbauer Ingenieure Winkelmesser mit 90 Grad rechten Winkel mit Sitz,Tischler Anreißwinkel für präzise Layout- und Messarbeiten
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 11/10/2025
Very pleased with purchase. Item much like the similar Festool version but at a fraction of the cost.
ENJOYWOOD 2 Stück 19mm 20mm Bankhund Halte Schnellspannzangen Edelstahl MFT Spannzangen für MFT Tisch
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 09/10/2025
Very good. Unusual to see this style of benchdog that is not made entirely of plastic, so these being made of aluminium should be quite a bit stronger.
RUITOOL Aluminium 19 mm 20 mm MFT Werkbankzwinge mit rutschfestem Tischstopper für DIY-Projekte
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 08/10/2025
Certainly a useful product. However the clamping arrangement seemed to have been designed around a circular saw sole plate that was somewhat thinner in thickness than the aluminium soleplate on my Makita 5" trimsaw. No problem encountered attaching the front clamp, however a bit more manipulation was required to attach the rear clamp, since the rear edge of the soleplate was thicker. Fortunately, the rear clamp is sprung, which just about allowed it to be raised over this thickened edge. Once attached and tightened up, the device felt very robust with no discernable movement or deflection noted. The clamp I was required to purchase was the larger of the two, as the smaller one wasn't long enough to fit my saw. Other than that, I'm more than happy with the purchase. Perfect for cutting neat parallel strips from sheet materials, such as plywood, MDF, laminates, and timber planking.
Verstellbare Kreissäge-Führungsleiste aus Aluminiumlegierung Einfaches Holzwerkzeug für präzises Schneiden Frei verstellbare Schnittbreite Glatte Oberfläche Universelle Kompatibilität
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 22/09/2025
Not quite as well made as I thought they would be if I'm being honest. Kind of cobbled together from different parts that are rather loosely fitted together. I would'nt call the way they have been designed and put together seamless, but they should be OK for something of medium weight like a mitre saw, where you just want to give the machine a little more height on a work bench.
Edelstahl verstellbare Nivellierfüße Montagehalterung M8 Gewinde für Gehrungssäge Möbelbeine
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 22/09/2025
I actually like these very much. Well made design with reliable solid feel when engaging the cam clamp mechanism. Small size makes them best suited to light to medium clamping tasks.
Schnellspannhebelklemme GH-302-CL CH-302-CR mit einer Haltekapazität von 82 kg und einem Kolbenhub von 20 mm zum sicheren und effizienten Spannen mit hoher Haltbarkeit
US$0.00
0
Empfehlungen
Kommentar (0)
BG571117144 25/06/2025
A sufficiently well made item. 8mm thick. Both base plate and adjustable guide rail made from rigid durable perspex. Various bits of hardware included for attachment of tools. Included steel wing nuts for adjusting guide, can be replaced with a better quality type of wing nut or alternatively with thumb screws. All in all, I would deem this product to be pretty good value for what it is. I purchased this item for use with a router. I do not intend using it with a circular saw.
8mm dicke Acryl-Unterplatte mit verstellbarer Breite klarem visuellen Schneid-Mini-Tischsäge passt für Schneidemaschine Gong-Maschine
US$0.00
0
Empfehlungen
Kommentar (0)

Sie sind der Experte, können Sie helfen?

Wir laden Sie herzlich ein, die E-Mail mit der Einladung zur Antwort zu abonnieren!

Wenn Sie sich anmelden, werden wir Sie per E-Mail einladen, um Fragen zu Produkten zu beantworten. Wenn Sie sich anmelden, erhalten Sie auch das "Hilfreiche Abzeichen"! Sie können sich jederzeit auf der Seite mit den Datenschutzeinstellungen abmelden.

Helfen Sie anderen und seien Sie glücklicher!

  • Abonnieren

Über Abzeichen

Abzeichen sind mit der Community verbunden, und Benutzer erhalten Abzeichen, indem sie hochwertige Inhalte erstellen, Missionen abschließen oder an speziellen Aktivitäten teilnehmen. Bestimmte Personen haben auch ihre eigenen exklusiven Abzeichen.
CEO-Abzeichen

das ceo badge gehört nur dem chef von banggood.

Abzeichen, die Sie verdienen können, folgen in Kürze
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe