Alle Nachrichten

georget Here is a link to a manual that is very close to this GM328A tester... https://img.banggood.com/file/products/20170621041627Transistor%20Tester-user-manual.pdf You will need to connect an external IR Infrared Receiver to the tester to receive codes. Something like this... https://usa.banggood.com/10pcs-Universal-IR-Infrared-Receiver-Head-With-Iron-Shell-TL1838-VS1838B-1838-38Khz-p-1211280.html?rmmds=buy&cur_warehouse=CN

2020-11-21 08:15:13 Hilfreich (1)
Vorlegen
Antworten (2)

Q: is keyboard.h library available in this version?

gefragt von Saurav Modak auf 2018-11-15 06:35:24

georget I do not see any info for keyboard.h library compiling on the D1 R2.

2020-11-20 07:32:46 Hilfreich (0)
Vorlegen
Antworten (2)

Q: ele vem desmontado?

gefragt von Danilo Bellato Beissman auf 2019-05-11 12:48:26

georget It is a kit where you have to solder the electronic components on the board and assemble the case.

2020-11-20 06:55:30 Hilfreich (0)
Vorlegen
Antworten (4)

georget No this is NOT an intelligent controller. It is simply an amplifier. You connect the output of your LED controller such as an Arduino, to the input of this amplifier. Then connect the output of this amplifier to a string of RGB or RGBW leds to drive them.

2020-11-20 06:51:01 Hilfreich (0)
Vorlegen
Antworten (1)

Q: What version firmware does the tester ship with? Is it V2.68?

gefragt von georget auf 2020-02-29 12:01:55

Eugen NO, mine was LCR transistor tester by efan & haoqixin v2.07, one year old now.

2020-03-01 01:45:59 Hilfreich (1)
Vorlegen
Antworten (3)

georget I would use the holder that comes with the Ksger soldering station. This way you can position it where ever it is most comfortable to reach. I just use the Daniu for holding the component and the magnifier to get a better view. You may still need glasses depending on how bad your eyes are.

2020-11-12 07:07:37 Hilfreich (0)
Vorlegen
Antworten (1)

georget Absolutely NOT 5mm. That must be a typo on the website. Always go by what the manufacture printed on the tool. 1 mm copper max. This is a precision tool for cutting component leads flush with the circuit board. Great tool for what it does.

2020-11-12 06:56:50 Hilfreich (0)
Vorlegen
Antworten (6)

Q: is this good also for making cutting holes in masonry walls?

gefragt von Cesar Cruz auf 2019-11-25 11:10:05

georget These blades are great for wood and maybe drywall, but not cement.

2020-11-12 06:46:23 Hilfreich (0)
Vorlegen
Antworten (2)

Q: when will stock came??available thanks

gefragt von BG141016411 auf 2020-11-10 06:40:55

georget It looks like it is in stock now as of 11-10-2020

2020-11-10 06:48:05 Hilfreich (0)
Vorlegen
Antworten (1)

georget After the battery has gone through the Pulse Repair mode and displays OFF, you should switch it over to Vehicle or Motorcycle mode if you are going to keep the charger on the battery for an extended period of time. The charger will act as a trickle charger to maintain the battery. Normally you will use the charger in Vehicle or Motorcycle mode to charge your battery. I usually use Motorcycle mode because it charges at a lower Amp. I only put the charger on my batteries in Pulse repair mode once a month.

2020-11-10 05:36:20 Hilfreich (1)
Vorlegen
Antworten (2)

georget Power Select 1 is the option to use if your power supply output is two wires. Power Select 2 is the option to use if your power supply has a plug or jack connected. Both options are connected in parallel on the circuit board. It is there for your convenience.

2020-11-04 09:55:44 Hilfreich (0)
Vorlegen
Antworten (2)

georget Yes, The charger should be able to charge EFB (Enhanced Flooded Battery) and AGM (absorbent glass mat) batteries. It is best to charge a battery slow using the Motorcycle mode of the charger. Current is limited to 1.5 amps. It may take several hours to charge depending on the state of discharge of your battery.

2020-11-04 08:52:16 Hilfreich (0)
Vorlegen
Antworten (3)

Q: How can I contact the seller?

gefragt von MikeDAWolf auf 2019-04-24 07:45:51

georget At the top of the page, click Help.

2020-11-04 08:42:21 Hilfreich (0)
Vorlegen
Antworten (2)

Q: does it work with usb? or what plug does it use?

gefragt von Pulsh auf 2017-12-11 10:28:02

georget No, USB does not supply enough power. The LED strip requires 12v and around 6 Amp. Get a power supply something like this... https://www.banggood.com/AC-100-240V-to-DC-12V-5A-60W-Power-Supply-Adapter-For-LED-Strip-Light-p-994870.html

2020-10-27 11:14:48 Hilfreich (0)
Vorlegen
Antworten (5)

Q: which specific power supply I need to buy? measures

gefragt von BG131612938 auf 2020-10-25 10:07:46

georget This one is 5A which is a little low but should be ok. It has the correct size connector 5.5mm x 2.1mm https://www.banggood.com/AC-100-240V-to-DC-12V-5A-60W-Power-Supply-Adapter-For-LED-Strip-Light-p-994870.html

2020-10-27 11:12:48 Hilfreich (0)
Vorlegen
Antworten (1)

Q: does it works with an 5.5mmX2.1mm power supply with 12V and 2A?

gefragt von BG131612938 auf 2020-10-25 11:06:29

georget 2A is too low. You should power the strip with at least 6A. When the strip displays white, it will draw the most power.

2020-10-27 10:57:09 Hilfreich (0)
Vorlegen
Antworten (1)

Q: Is the built-in charger for NiMH or Li-ion battery?

gefragt von Skagg auf 2019-12-15 02:58:03

georget The flashlight ships with a Li-ion Battery so I would suspect the built in charger is for Li-ion.

2020-10-20 06:50:24 Hilfreich (0)
Vorlegen
Antworten (2)

Q: pengiriman ke indonesia berapa hari? terima kasih

gefragt von Usupsaepuloh auf 2019-11-09 02:31:06

georget Iniadalah pertanyaan untuk layanan pelanggan Banggood. Di bagian atas halaman, klik Bantuan - Hubungi Kami - Pra-Penjualan.

2020-10-20 06:42:02 Hilfreich (0)
Vorlegen
Antworten (2)