Alle Nachrichten

Q: does it come with a UK 3 pin plug?

gefragt von BG421548108 auf 2021-01-21 02:52:17

pattarom No, mine was arrived with european plug. But I think if you order it from UK, they send you UK plug.

2021-01-21 03:35:05 Hilfreich (0)
Vorlegen
Antworten (2)

pattarom In the product description is a link to download the software. Anyway, here is the link: https://myosuploads3.banggood.com/products/20191218/20191218210409MR-pm2.5.rar Unfortunately there is no instruction manual.

2021-01-12 07:41:32 Hilfreich (0)
Vorlegen
Antworten (1)

pattarom As far I know, there is no way to upgrade the firmware. Mustool doesn't have a website and there is no way to contact them directly.

2020-12-27 02:35:41 Hilfreich (0)
Vorlegen
Antworten (1)

Q: Is it compatible to install a milling machine?

gefragt von BG485614184 auf 2020-12-14 09:29:24

pattarom No, it's lacking of z axis, so you cannot rise of lower the drill bit. In any case, the structure is not enough sturdy for milling.

2020-12-14 01:22:20 Hilfreich (0)
Vorlegen
Antworten (3)

pattarom Laser have a fixed focus, so you must keep 2 millimeters from surface. Into the package is provided a piece of black acrylic (about 5 by 9 centimeters) that you can use al shim. To properly setup the laser: - Release the two screws that fix the laser sled, raise completely the laser.and re-fix screws - Place the object you want to engrave-cut under the laser - Place the black acrylic jig over the object - Release the laser sled screws and lower the laser until it touch the jig. - Fix the screws and remove the black acrylic jig. Now you che start the job. If the object to be engraved is very thin, instruction recommend, to avoid vibrations, to raise it placing another taller object under it, so the laser is less protruding from the carriage. Let me know if you need more explanations.

2020-11-21 03:16:13 Hilfreich (1)
Vorlegen
Antworten (1)

Q: Please, may anybody have indications of a laser for this machine?

gefragt von rbtcysne auf 2019-01-09 05:12:54

pattarom Youcan mount any kind of laser module, the problem is to check if controller have the output suitable to turn laser on and off. Not all controllers are the same and you must check if your board have this output pins. There is another thing you must consider: Many lasers TTL controlled for set the laser power (it still turn laser on and off). If your controller have TTL output you can connect your TTL controlled laser directly, if not, you must buy a TTL card to convert oyu on-off signal from controller into TTL signal. (or simply buy a laser ther is not TTL controlled). If You have a 3D printer, you can use Laser on it. Most of the 3D printers controller have a TTL output for Laser module.

2020-10-30 05:39:31 Hilfreich (0)
Vorlegen
Antworten (1)

Q: can i use spindle with this cnc ,and how

gefragt von almala1414 auf 2020-01-07 06:45:41

pattarom Yes,EleksMaker (I'm not affiliated to) provide this optional accessories: spindle, third z axis and a 3 axis controller (original can control only two axes: x and y). The only problem is that the cost of all options is near the cost of a whole mini CNC (that is more sturdy). If you search "mini cnc" here in Banggood you'll find many models. You need only choose which is suitable with your needs.

2020-10-30 05:29:33 Hilfreich (0)
Vorlegen
Antworten (1)

pattarom Youmust looking for: JST PHR-6P connectors 2.0mm

2020-10-30 05:22:16 Hilfreich (0)
Vorlegen
Antworten (1)

pattarom Yes, when you connect the microscope to pc or mac, a menu is display on scope screen where you che choose what to do: Mass Storage, PC Camera o Rec_mode With mass storage you can acces from computer to the content of the SD card inserted on the scope. With PC Camera mode you can use the bigger computer display to view magnified objects.

2020-10-18 07:34:13 Hilfreich (0)
Vorlegen
Antworten (3)