Alle Nachrichten

Franson Pressing and holding the C/F key will reset the high/low readings. Else it will reset automatically every 24 hours (from time when batteries were inserted or from time the C/F key was pressed/held).

2019-12-30 04:56:01 Hilfreich (2)
Vorlegen
Antworten (10)

marcar They should work fine with at least 3 V, probably very dimm or no light at all at 2.4 V (specifications: Forward Voltage:3.05-3.65V (250mA))Powering it with AAA batteries will not last much due to demanded current. Apart from this, when batteries discharge a bit, you will be below 3 V.Maybe a 18650 LiPo battery with higher capacity is a better option.

2020-02-17 08:57:48 Hilfreich (0)
Vorlegen
Antworten (2)

Q: can you show the bottom side?

gefragt von Ronaldsneek auf 2019-05-03 01:11:50

lmml Sir youcan aks them to take an photo of this product for you :https://www.banggood.com/Contact-Us_hi111

2019-05-08 06:51:45 Hilfreich (0)
Vorlegen
Antworten (1)

Ronaldsneek If temperature is reached unit turns the heater off, If temerature is below the programmed temperature it will turn the heater on again. It is not self modumating, that happens only if the thermostat and the heater are from the same brand.

2019-01-07 05:03:09 Hilfreich (1)
Vorlegen
Antworten (3)

Hist Working voltage: DC 2.7-12V,it can't exceed 12V

2018-12-31 12:20:23 Hilfreich (0)
Vorlegen
Antworten (1)

Q: How big or small is it?

gefragt von Ronaldsneek auf 2018-08-24 03:50:29

Lamella 9*6*4cm

2018-08-31 04:36:34 Hilfreich (0)
Vorlegen
Antworten (1)

Q: 75$ I'll buy !!

gefragt von Eky Zippel auf 2017-11-24 07:32:50

Ronaldsneek Thank you very much.

2018-08-16 05:15:30 Hilfreich (0)
Vorlegen
Antworten (1)