Charlied43
xcomseller Hi, Easiest way I found was, before soldering the PCB. Lay it on a piece of MDF. mark though the LED connections with a pin. Then drill out to 5mm, you then have the grid Before making up the LED slices, complete the board then insert a LED into hole H1 and the hole next to it, this will give you the correct polarity
2021-05-04 01:51:38 Hilfreich (0)Q: Can we use 1306 motors on this frame? Thanks
gefragt von Charlied43 auf 2020-01-09 04:22:48
Tweetii 1104~1207 Motor is recommended
2020-01-09 09:05:58 Hilfreich (0)
Q: Having trouble binding with a regular Taranis , Only 2 solid RED and Green LED ??
gefragt von Charlied43 auf 2018-06-24 12:05:57
Zeitgeist Yes. You can operate as following steps: 1. Turn on the transmitter while holding the F/S button on the module (please refer to the module instruction manual for switch positions). Release the button. The RED LED on the Module will flash, indicating the transmitter is ready to bind to the receiver 2. .Connect battery to the receiver while holding the F/S button on the receiver. The LED on the receiver will flash, indicating the binding process is completed. 3.Turn off both the transmitter and the receiver 4. 4.Turn on the transmitter and connect the battery. The GREEN LED on the receiver indicates the receiver is receiving commands from the transmitter. The receiver/transmitter module binding will not have to be repeated, unless one of the two is replaced.
2018-07-03 01:43:17 Hilfreich (0)Q: Is this unit compatible with other OpenLrs Recievers ? For example HawkEye ?
gefragt von Charlied43 auf 2018-06-15 03:47:10
Kokken you need to upgrade the OpenLrs firmware
2018-07-06 12:49:35 Hilfreich (0)Wir laden Sie herzlich ein, die E-Mail mit der Einladung zur Antwort zu abonnieren!
Wenn Sie sich anmelden, werden wir Sie per E-Mail einladen, um Fragen zu Produkten zu beantworten. Wenn Sie sich anmelden, erhalten Sie auch das "Hilfreiche Abzeichen"! Sie können sich jederzeit auf der Seite mit den Datenschutzeinstellungen abmelden.
Helfen Sie anderen und seien Sie glücklicher!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
Charlied43@BG484864116 Samehere, please scan/send us the template! )