Alle Nachrichten

Q: Is this tinned pure copper or is it CCA wire?

gefragt von BG225733103 auf 2022-10-04 12:13:40

Burplerlcbm tinned copper

2022-10-05 08:22:57 Hilfreich (0)
Vorlegen
Antworten (1)

Q: What is RTC for each tip?

gefragt von BG143912477 auf 2022-03-19 01:31:58

BG225733103 RTC? Wich definition of RTC are you talking about? Your Question makes no sense...There are lots of different meanings for RTC. See here: en.wikipedia.org | wiki | RTC If you want people to help you stop using acronyms and give more context instead of just a short question.

2022-03-19 04:06:24 Hilfreich (0)
Vorlegen
Antworten (2)

BG225733103 Sure looks like a scalpell blade to me. The blade shown here seems to be for use with a scalpell handle no 3 or 4. Blade shape could be a Rüttgers no 11 or an Aesculap no 25. But the mounting slot is the same for all blade shapes, so you can use any shape you like. Use your favorite image search engine to search for "scalpell blade shapes" to find the one you want.

2021-09-16 03:45:51 Hilfreich (1)
Vorlegen
Antworten (2)

Q: What kinds of probes/leads should I use?

gefragt von cubeconvict auf 2019-06-27 10:47:07

BG225733103 Bare wire is probably best. I suspect that it was never intended for banana plugs, but as pure screw terminals. Hole diameter in the plastic head is about 5.5mm.

2021-08-29 01:06:26 Hilfreich (0)
Vorlegen
Antworten (6)

Q: what kind of fuses use? 5x20 mm? and how much amperes are each one?

gefragt von pjlabarta auf 2019-09-29 08:59:13

BG225733103 I suspect that the fuses that are currently present will be installed with respect to the current. My board contained 5A fuses.

2021-08-29 12:57:48 Hilfreich (0)
Vorlegen
Antworten (6)

Q: Can I get 24V by connection with 12V and -12V?

gefragt von BG405471057 auf 2021-08-22 02:03:19

BG225733103 On the board is no circuitry that would prevent you from using the +12V with the -12V instead of GND - the screw terminals are connected straight to the ATX connector via a fuse only. So yes, you __could__ get a 24V potential. If it works or if it goes bang depends entirely on the ATX PSU that you connect to the board.

2021-08-29 12:50:15 Hilfreich (0)
Vorlegen
Antworten (8)

Q: Are their 220 Ohm and 10 k values resistors?

gefragt von BG019391538 auf 2021-08-03 04:09:34

BG225733103 all Ω values are listed in the overview.

2021-08-03 10:36:45 Hilfreich (1)
Vorlegen
Antworten (9)

Q: do you have 1k resistors included

gefragt von BG153723470 auf 2020-11-06 07:54:55

BG225733103 1kΩ is listed in the value list shown in the overview, so yes there are 20 pieces.

2021-08-03 10:33:15 Hilfreich (0)
Vorlegen
Antworten (2)

Q: How much current does it draw?

gefragt von BG225733103 auf 2021-06-22 07:09:26

Joao 12v

2021-07-14 09:58:55 Hilfreich (0)
Vorlegen
Antworten (1)

BG225733103 So...Where are the pictures of the grown plants? It's been 22 months...

jrgunder 17/08/2019
0
Kommentar (1)

BG225733103 Inthe description it says 3mm. Measured with a caliper the shanks are between 3,09mm and 3.16mm

2021-05-25 06:21:04 Hilfreich (0)
Vorlegen
Antworten (2)

BG225733103 Isthe LED indicating power on? If yes, make sure the 5A fuses aren't blown.

2021-05-25 06:16:21 Hilfreich (0)
Vorlegen
Antworten (8)