Alle Nachrichten

Q: is this hd for use with the dji googles?

gefragt von borsve auf 2021-10-15 12:30:43

nnsense Nope, you have to look for drones using something like "CaddxFPV Vista"

2021-10-20 05:47:00 Hilfreich (1)
Vorlegen
Antworten (4)

Q: will it work with the radiomaster tx16s

gefragt von Dan187 auf 2021-06-04 04:24:20

nnsense The MAMBA MSR D16 is FrSky D16 compatible, so it WILL work FrSky receivers and any multi-protocol radio out there including the RadioMaster tx16s.

2021-08-08 06:23:32 Hilfreich (2)
Vorlegen
Antworten (3)

Q: can i binde it with the radiomaster tx16s?

gefragt von BG750384514 auf 2021-07-26 12:00:22

nnsense The MAMBA MSR D16 is FrSky D16 compatible, so it WILL work FrSky receivers and any multi-protocol radio out there including the RadioMaster tx16s.

2021-08-08 06:22:53 Hilfreich (0)
Vorlegen
Antworten (1)

nnsense It's not an "inopportune comment", range also means "penetration", with 50mw you're unlikely to get signal behind a building 25 meters from you. And they are selling it with crossfire option.. so you could "easily go from 500 m to 1 km" but you cannot because of the ridiculous VTX.

2021-07-31 04:24:11 Hilfreich (2)
Vorlegen
Antworten (4)

Q: what’s the difference between type a and type b

gefragt von ImranoXI auf 2021-01-21 06:25:59

nnsense Buy the type B, that is the one showing degrees as a number. Type A is the one with the 3 dots. For 1$, it worth.

2021-01-23 08:00:53 Hilfreich (1)
Vorlegen
Antworten (4)

nnsense Hi, date cannot be changed, unfortunately (yes, it is a pain.. I know..) and anyway there's no battery inside the goggles so you should update it every time you turn them on. About the update, once you've turned them on (powering on while holding the left rotary switch down) you need to put BOTH "EV300O_A_APP_V1.2.9.bin" and "EV300O_B_APP_V0.0.3.bin" files into that folder. Leave the copy finish and WAIT like 5 or ten minutes more. There's no progress shown, so you cannot really know when the update is finished internally, that's why is better to leave them alone 5 or 10 minutes more. These are the goggles files, once done unplug the goggles, turn them on, you should have the new firmware. Do the same with the module (connect it to your computer holding the button) and copy the third file from the update package. Leave this alone some minute more too. That's all.

2021-01-13 03:45:20 Hilfreich (2)
Vorlegen
Antworten (3)

Q: Can measure less 2amp ac or dc

gefragt von BG573636154 auf 2020-10-03 10:57:18

nnsense Yes, the gear selector reads 2 - 20 - 100 ampere. both AC-DC.

2021-01-08 05:07:17 Hilfreich (0)
Vorlegen
Antworten (3)

Q: Good evening, does it measure temperature and capacitance?

gefragt von Francisco auf 2018-11-08 08:04:53

nnsense To elaborate a bit the "No, Yes" answer: It doesn't measure temperature, it does measure capacitance.

2021-01-08 05:04:34 Hilfreich (1)
Vorlegen
Antworten (4)

Q: Can I plug this into my PDB instead of the battery?

gefragt von adamconnolly711 auf 2020-10-03 12:54:25

nnsense As the other answer rightly said, this is a power supply, you plug this into a charger. If your charger has the function, you can start it in "power supply" mode and set, say, 1.8A - 14.4V, and use it to power your drone using a female-female cable. As this is rated "5A - 20V" you would more than likely burn your board.

2021-01-02 06:46:48 Hilfreich (0)
Vorlegen
Antworten (4)

nnsense Check DIATONE GTR249T, it's 2.5inch, basically same specs, same camera, but has TBS Unify. https://www.banggood.com/DIATONE-GTR249T-HD-115mm-2_5inch-3-4S-FPV-RC-Drone-Caddx-HD-TBS-Unify-VTX-Deadcat-Version-p-1581288.html?cur_warehouse=CN&rmmds=search

2020-12-23 06:38:19 Hilfreich (0)
Vorlegen
Antworten (2)