Alle Nachrichten

hareesh This will fit on ender 3 pro lead screw but the distance between mounting holes are less than stock lead screw nut and it is not threaded holes. You can install it on ender 3 pro but you need to cut the holes and use longer bolts and nut.

2022-01-16 09:59:10 Hilfreich (0)
Vorlegen
Antworten (2)

Samppa78 Noproblem. Fits better for higher flow and faster printing.

BG385011182 29/10/2021
2
Kommentar (1)

Samppa78 Noproblem. Fits better for higher flow and faster printing.

BG385011182 29/10/2021
2
Kommentar (1)

Q: accepts iPhone 12?

gefragt von Tsabi159 auf 2021-12-18 08:21:43

Samppa78 Holder accept max 80 mm wide phones. If your iphone is in that range then it will fit.

2021-12-18 01:28:14 Hilfreich (0)
Vorlegen
Antworten (2)

Q: how many leds does it contains 100 or 144 ?

gefragt von MukeshDIY auf 2020-01-31 08:43:05

Samppa78 Two strips soldered together to make 144 led strip.

2021-12-18 01:24:53 Hilfreich (0)
Vorlegen
Antworten (4)

Q: Does this device work okay with 230v outlets?

gefragt von 0solar4 auf 2020-11-27 06:42:21

Samppa78 Yes. EU version works with 230V outlet without issues.

2021-12-18 01:23:59 Hilfreich (0)
Vorlegen
Antworten (4)

Q: What is the dimension of the holes?

gefragt von irenebrowning auf 2021-12-18 12:13:12

Samppa78 Holes diameter is 10mm for each hole.

2021-12-18 01:23:17 Hilfreich (0)
Vorlegen
Antworten (1)

Q: nitecore e4k feneri kılıfın içine sığar mı?

gefragt von Adon KARA auf 2021-10-18 04:03:15

Samppa78 Noit doesnt fit. Diamiter of the body in 28.1mm for nitecore E4K.

2021-11-29 11:15:57 Hilfreich (0)
Vorlegen
Antworten (2)

Q: Does this have a thermal bond to the memory or CPU?

gefragt von bosahv auf 2020-07-01 01:32:51

Samppa78 Ithas a machined raised contacts for CPU, and memory. Notice,don't use thermal tape provided with this kit. It is too thick and will bend your Raspberry pi board,instead use a thermal paste for cpu and memory chips and assemble parts correctly

2021-11-29 11:12:30 Hilfreich (0)
Vorlegen
Antworten (2)