Alle Nachrichten

dorioro You should wait for it to cool down before removing the printed part

2023-05-23 11:24:04 Hilfreich (0)
Vorlegen
Antworten (1)

Q: does it come with a soldering wire?

gefragt von BG118474114 auf 2022-12-28 10:03:24

dorioro No it doesn't it is just the silicon pad. Nothing else included.

2022-12-30 04:38:34 Hilfreich (1)
Vorlegen
Antworten (6)

dorioro I don’t believe you can control it but take a look at this Https learn.adafruit.com adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi backlight-control

2022-12-10 12:40:10 Hilfreich (0)
Vorlegen
Antworten (2)

Q: hello, Can i use or with an alfawise u20? thanks

gefragt von Nyan54 auf 2020-06-30 12:32:14

dorioro If you can connect it to the mobo and change firmware accordingly, Yes

2022-12-10 12:36:25 Hilfreich (0)
Vorlegen
Antworten (3)

dorioro Depends on what you cut. It has 5mm opening. But obviously you are limited by material type.

2022-10-19 05:47:04 Hilfreich (0)
Vorlegen
Antworten (17)

Q: What size fan does this case support?

gefragt von cben2142 auf 2019-01-10 10:15:31

dorioro 30mm fan can be used

2022-08-20 02:32:10 Hilfreich (0)
Vorlegen
Antworten (4)

Q: hi it works with new ender 5? thanks

gefragt von lorenzoquadri31 auf 2019-03-28 06:38:56

dorioro I installed it on Ender 5 Plus with splitter for Z axis motors and works fine once you configured it correctly.

2022-08-11 12:09:25 Hilfreich (0)
Vorlegen
Antworten (2)

Q: Does Ender 5 mainboard (marlin 1.0.1) work?

gefragt von Pápai auf 2021-01-18 03:06:12

dorioro Depends on mobo version. In teory with proper firmware upgrade it should work

2022-07-19 02:41:36 Hilfreich (0)
Vorlegen
Antworten (2)

dorioro It’s a direct replacement. But depending on your setup you might need to update firmware. For example if you have bltouch

2022-07-19 02:38:47 Hilfreich (0)
Vorlegen
Antworten (1)