Alle Nachrichten

Q: Can these props work on a foamy acrobatic bi-plane with a 2200kv motor? Thanks

gefragt von tremaynechettyandroi auf 2020-02-17 07:16:38

Xander79 si

2022-03-06 03:19:32 Hilfreich (0)
Vorlegen
Antworten (2)

Q: how do you get the controller to work wirelessly

gefragt von JohnSalt auf 2021-06-14 02:28:24

tremaynechettyandroi You need to plug the auxiliary cable into the USB stick with the jumper directly into the first or last or program jumper depending on your receiver. Then connect the radio directly to the receiver as usual. It worked fine on my FrSky and Futaba. There are also lots of YT videos you can watch to solve the many issues you may face. Good luck

2021-06-15 01:34:23 Hilfreich (0)
Vorlegen
Antworten (1)

Q: Is the shaft diameter exact 3.00mm or 3.17mm ?

gefragt von 666yeti666 auf 2021-01-02 04:58:37

tremaynechettyandroi Good afternoon My one was exactly 3.00mm. Good luck

2021-01-04 06:31:56 Hilfreich (0)
Vorlegen
Antworten (2)

ridgeracer You can either use a FC and connect the servos to the pwm outputs or get an Ibus to pwm output converter. I don't recall if BG sells that.

2020-03-07 01:21:15 Hilfreich (0)
Vorlegen
Antworten (1)

Q: Will this work with a micro fixed wing plane?

gefragt von tremaynechettyandroi auf 2020-02-28 12:07:09

ridgeracer You would need something to convert the Ibus signal back to separate PWM outputs and channels for the servos or use a flight controller with enough channels for your model.

2020-02-28 01:56:11 Hilfreich (0)
Vorlegen
Antworten (1)