Antworten

Zsolt Szabolcsi Hi, I'm Zsolt from Hungary, Budapest. I think you made some mistake when assembled the frame. It should be 90° agle at the corners if you follow precisely the assembling guide. Check the corners first. I think your problem is not here but at the rubber strips. You must bring the laser holding crossbar to the front exactly until hit the first bar. First, fix the strip at the back. Second, lace over the rubber strip through the aluminum wheels. Third, now comes where it can go wrong: pull the rubber strip towards you and check its tightness. (also check it lies properly on the wheels). Do the same with the other side. You can do it alone but easier if you have help to keep the crossbar at the front of frame. If you do it properly, it must be perfect. Working area: you can see 500 mm scale on each bar. Don't let them to confuse yourself, the real working area is just 405mm x 415mm.

Hilfreich (1)
Vorlegen
Antworten (3)

Zsolt Szabolcsi Yes, you can use additional language. You must download the proper language pack. That`s easy: Select Start > Settings > Time & language > Language & region. Go to Preferred languages, select Add a language.

Hilfreich (0)
Vorlegen
Antworten (2)

Q: What is the overall length of the lamp. What is the wattage

gefragt von Jonesy auf 2020-01-09 12:38:33

Zsolt Szabolcsi Youcan see in the overview: wattage is 2W. Overall lenth is 4 cm approx.

Hilfreich (0)
Vorlegen
Antworten (1)

Q: Hi .The camera is capable of the Hungarian language. Thanks

gefragt von zotya auf 2021-04-23 14:52:29

Zsolt Szabolcsi No,it isn't. You can choose english instead. To be honest: I had installed the cameras and the gps module in my car and I had set to metric (km) and set the screensaver to 1 min. Checked the G-sensor settings and left on "low". That was more than a year ago. I didn't have to change anything. Works perfectly. Does its job. Because of my settings it turns off the screen after 1 min and I use as normal mirror (camera still recording). When I wanna see what it sees I just touch the screen and gets alive.

Hilfreich (0)
Vorlegen
Antworten (1)

Zsolt Szabolcsi This Blitzwolf product maybe good for you. Check the details and be sure your monitors have holes for screws. This monitor stand has 2 pieces of 4 screw frames (approx. 10x10 cm). Just screw the frames to the monitors and snap the frames to the holding frame of arms. The arms are strong enough to hold 32" monitors. I didn't regret to buy this monitor stand. :)

Hilfreich (0)
Vorlegen
Antworten (1)

Zsolt Szabolcsi It has two versions: left hand and right hand drive, as you can see on the pictures. My experience, they check your country by your order and send that kind of version which type is usual in that country. I got left hand drive version, because in my country we drive on left side. One of my familiy member lives in UK and got automatically right hand drive version. It's just my experience and not a rule...

Hilfreich (2)
Vorlegen
Antworten (1)

Zsolt Szabolcsi Yes, of course. Front camera is recording while you switch to reverse or seeing the stream of rear camera as mirror. Yes, the rear camera turns on and off when shifting to reverse automatically if you installed properly.

Hilfreich (1)
Vorlegen
Antworten (1)

Q: this is for left or right driver?

gefragt von BG810333554 auf 2020-11-06 04:28:42

Zsolt Szabolcsi Same question asked by Steve and already answered on 23rd september, 2020.

Hilfreich (0)
Vorlegen
Antworten (2)