It comes in pieces. The package contains 2 hubs and 8 ball links which you have to build them yourself. It's a good upgrade to make the suspension smoother from metal ball head and you can squeeze a bit more performance out of your WLtoys 1/28.

It comes in pieces. The package contains 2 hubs and 8 ball links which you have to build them yourself. It's a good upgrade to make the suspension smoother from metal ball head and you can squeeze a bit more performance out of your WLtoys 1/28.

It comes in pieces. The package contains 2 hubs and 8 ball links which you have to build them yourself. It's a good upgrade to make the suspension smoother from metal ball head and you can squeeze a bit more performance out of your WLtoys 1/28.

Great item and fast shipping,and a great seller./// Join me on YouTube RC POWER BY RENE Great item and fast shipping,and a great seller./// Join me on YouTube RC POWER BY RENE

Great item and fast shipping,and a great seller./// Join me on YouTube RC POWER BY RENE Great item and fast shipping,and a great seller./// Join me on YouTube RC POWER BY RENE

Great item and fast shipping,and a great seller./// Join me on YouTube RC POWER BY RENE Great item and fast shipping,and a great seller./// Join me on YouTube RC POWER BY RENE

Great item and fast shipping , great Sellers good and cheap ,tumps up Join on YouTube my friend Channel , Jay drone When you love drone’s and Rc Cars and more.

Great item and fast shipping , great Sellers good and cheap ,tumps up Join on YouTube my friend Channel , Jay drone When you love drone’s and Rc Cars and more.

Great item and fast shipping , great Sellers good and cheap ,tumps up Join on YouTube my friend Channel , Jay drone When you love drone’s and Rc Cars and more.

Der Faden für die Kugelbolzen muss etwas gekürzt werden, sonst treffen sie die Achsen.

Works great. The thread for the ball studs need to be shortened a bit or they will hit the axles.

Der Faden für die Kugelbolzen muss etwas gekürzt werden, sonst treffen sie die Achsen.

muy recomendable

muy recomendable

muy recomendable

Die Tassen selbst sind unglaublich, aber die Kugelgelenke sind schrecklich. Ich habe sie auf meinem K989 installiert und sie sind so dick unter dem Ball, dass die Aufhängung überhaupt nicht runter kommen kann. Wenn ich noch die Serienräder benutzen würde, würden sie nicht mal den Boden berühren. Ich musste bereits die Unterseite der Schrauben kürzen, damit sie die Halbwellen nicht blockieren, aber ich muss auch die um die Gelenke herum rasieren, damit ich wieder Federweg haben kann.

the cups themselves are incredible but the ball joints are awful. I've installed them on my K989 and they are so thick beneath the ball that the suspension can't come down at all. If I was still using the stock wheels they wouldn't even touch the floor. I've already had to trim the bottom of the screws so they wouldn't jam the half-shafts but I'll also have to shave the around the joints so I can have suspension travel again.

Die Tassen selbst sind unglaublich, aber die Kugelgelenke sind schrecklich. Ich habe sie auf meinem K989 installiert und sie sind so dick unter dem Ball, dass die Aufhängung überhaupt nicht runter kommen kann. Wenn ich noch die Serienräder benutzen würde, würden sie nicht mal den Boden berühren. Ich musste bereits die Unterseite der Schrauben kürzen, damit sie die Halbwellen nicht blockieren, aber ich muss auch die um die Gelenke herum rasieren, damit ich wieder Federweg haben kann.

it did fit it was great

it did fit it was great

it did fit it was great

Nice improvement for the 1/28 scale racer. One issue: The thread of the rod socket is a little bit to long resulting in grinding against the drive shafts. I had to abrate it 1.5mm with a Dremel.

Nice improvement for the 1/28 scale racer. One issue: The thread of the rod socket is a little bit to long resulting in grinding against the drive shafts. I had to abrate it 1.5mm with a Dremel.

Nice improvement for the 1/28 scale racer. One issue: The thread of the rod socket is a little bit to long resulting in grinding against the drive shafts. I had to abrate it 1.5mm with a Dremel.

perfect OEM fit. these actually give the car a bit of camber and can be seen on the tire wear. you need to get creative in which bolts go where but it’s easy to figure out. recommend

perfect OEM fit. these actually give the car a bit of camber and can be seen on the tire wear. you need to get creative in which bolts go where but it’s easy to figure out. recommend

perfect OEM fit. these actually give the car a bit of camber and can be seen on the tire wear. you need to get creative in which bolts go where but it’s easy to figure out. recommend

These fit perfect for my WLtoys k969. Great look and solid build. Fits well with the plastic stock suspension, and servo arms.

These fit perfect for my WLtoys k969. Great look and solid build. Fits well with the plastic stock suspension, and servo arms.

These fit perfect for my WLtoys k969. Great look and solid build. Fits well with the plastic stock suspension, and servo arms.