WPL Rc Truck Servo. Upgrade servo pre WPL aj JJRC modely aut najmä 1/16. Podrobnejšie parametre sú na obale serva (napr. Napätie 4,8 až 6V). OK doprava aj produkt.

WPL Rc Truck Servo. Upgrade servo pre WPL aj JJRC modely aut najmä 1/16. Podrobnejšie parametre sú na obale serva (napr. Napätie 4,8 až 6V). OK doprava aj produkt.

WPL Rc Truck Servo. Upgrade servo pre WPL aj JJRC modely aut najmä 1/16. Podrobnejšie parametre sú na obale serva (napr. Napätie 4,8 až 6V). OK doprava aj produkt.

Der perfekte Metall-Getriebeservo Ersatz für alle wpl (außer c34/44) MN, fayee und jjrc LKWs! Es ist die genauen Abmessungen, wie die Original-Servo Sied in einem wpl-Kit finden, perfekt für die Aufrüstung Ihrer rtr, wenn es nicht über proportionale Steuerung (erfordert einen neuen esc und Sender / Empfänger) Perfekter Austausch/Upgrade, wenn Ihr Original-Servo ein Getriebe zersplittert hat, wie ich es schon so oft mit dem Standard-Kunststoff Getriebe getan habe. Mit dem Ersatz-Servohorn über der Oberseite und mit den beiliegenden Schrauben fest an Ort und Stelle gehalten werden. Im Inneren der Zahnräder und eine schöne Schicht Fett, sehr schön in der Tat. Sehr empfehlen 👍

The perfect metal geared servo replacement for all wpl (except c34/44) MN, fayee and jjrc trucks! It's the exact dimensions as the original servo youd find in a wpl kit, perfect for upgrading your rtr if it doesn't have proportional steering(will require a new esc and transmitter/receiver) Perfect replacement/upgrade if your original servo has chipped a gear like I've done so many times with the stock plastic geared one. Can be held securely in place using the spare servo horn over the top and screwed in with included screws. Inside theres metal gears and a nice layer of grease, very nice indeed. Highly recommend 👍

Der perfekte Metall-Getriebeservo Ersatz für alle wpl (außer c34/44) MN, fayee und jjrc LKWs! Es ist die genauen Abmessungen, wie die Original-Servo Sied in einem wpl-Kit finden, perfekt für die Aufrüstung Ihrer rtr, wenn es nicht über proportionale Steuerung (erfordert einen neuen esc und Sender / Empfänger) Perfekter Austausch/Upgrade, wenn Ihr Original-Servo ein Getriebe zersplittert hat, wie ich es schon so oft mit dem Standard-Kunststoff Getriebe getan habe. Mit dem Ersatz-Servohorn über der Oberseite und mit den beiliegenden Schrauben fest an Ort und Stelle gehalten werden. Im Inneren der Zahnräder und eine schöne Schicht Fett, sehr schön in der Tat. Sehr empfehlen 👍

This servo functioned well initially but after about 30 minutes operation, the output shaft stooped rotating. However, from the sound, the motor appeared to be still turning. Fearing a stripped gear, the cover was removed. Fortunately, rather than a stripped gear, it could be seen that the first idler pinion had moved up on its shaft such that it was no longer being engaged by the motor pinion. To fix this problem, a small washer was glued to the pinion to serve as a spacer and prevent the pinion from moving far enough to disengage. The servo now functions as intended. It is possible that this is an isolated failure as otherwise the servo appears well made (eg, mostly metal gears, strong case, etc)

This servo functioned well initially but after about 30 minutes operation, the output shaft stooped rotating. However, from the sound, the motor appeared to be still turning. Fearing a stripped gear, the cover was removed. Fortunately, rather than a stripped gear, it could be seen that the first idler pinion had moved up on its shaft such that it was no longer being engaged by the motor pinion. To fix this problem, a small washer was glued to the pinion to serve as a spacer and prevent the pinion from moving far enough to disengage. The servo now functions as intended. It is possible that this is an isolated failure as otherwise the servo appears well made (eg, mostly metal gears, strong case, etc)

This servo functioned well initially but after about 30 minutes operation, the output shaft stooped rotating. However, from the sound, the motor appeared to be still turning. Fearing a stripped gear, the cover was removed. Fortunately, rather than a stripped gear, it could be seen that the first idler pinion had moved up on its shaft such that it was no longer being engaged by the motor pinion. To fix this problem, a small washer was glued to the pinion to serve as a spacer and prevent the pinion from moving far enough to disengage. The servo now functions as intended. It is possible that this is an isolated failure as otherwise the servo appears well made (eg, mostly metal gears, strong case, etc)

Очень компактная! брал на WPL C24 в живую выглядет более качественно чем на фото. чувствуется вес в руках, видимо шестерни действительно метал

Очень компактная! брал на WPL C24 в живую выглядет более качественно чем на фото. чувствуется вес в руках, видимо шестерни действительно метал

Очень компактная! брал на WPL C24 в живую выглядет более качественно чем на фото. чувствуется вес в руках, видимо шестерни действительно метал

Noch nicht installiert. Scheint ok. Lieferung ok

Not installed yet. Seems ok. Delivery ok

Noch nicht installiert. Scheint ok. Lieferung ok

This is a JX PDI-1181MG servo. It has exactly the dimensions of the WPL or MN-90 servos and even the same pinion with the high teeth count (40+ teeth). Direct replacement for servo in MN-90 D90 1/12 or Willys Jeep JJRC Q65. Strong, significantly stronger than the stock servo. Highly recommended, very good upgrade!

This is a JX PDI-1181MG servo. It has exactly the dimensions of the WPL or MN-90 servos and even the same pinion with the high teeth count (40+ teeth). Direct replacement for servo in MN-90 D90 1/12 or Willys Jeep JJRC Q65. Strong, significantly stronger than the stock servo. Highly recommended, very good upgrade!

This is a JX PDI-1181MG servo. It has exactly the dimensions of the WPL or MN-90 servos and even the same pinion with the high teeth count (40+ teeth). Direct replacement for servo in MN-90 D90 1/12 or Willys Jeep JJRC Q65. Strong, significantly stronger than the stock servo. Highly recommended, very good upgrade!

Wie beschrieben. Schnelle Lieferung nach Großbritannien. Genau das, was ich brauchte!

As described. Fast delivery to the UK. Just what I needed!

Wie beschrieben. Schnelle Lieferung nach Großbritannien. Genau das, was ich brauchte!

ok

ok

ok

Schöne schnelle Servo. Keine Beschwerden. Verwenden Sie es für WLtoys 144001 Umrüstung auf Brushless Motor und digitale Servo Combo.

Nice fast servo. No complaints. Use it for WLtoys 144001 conversion to brushless motor and digital servo combo.

Schöne schnelle Servo. Keine Beschwerden. Verwenden Sie es für WLtoys 144001 Umrüstung auf Brushless Motor und digitale Servo Combo.

Servo läuft gut.

Servo běží dobře.

Servo läuft gut.