Beaver_XT
Grabthe middle nut with pliers. Then use 1.5mm hex screwdriver or allen key to put in drive cup side with the gear and turn it clockwise.
The same as this but you use 1.5mm hex instead of flat head. https://www.youtube.com/watch?v=ZUxed3fCc2M
BG575344812 why would you lock the diff? you need to get a 1way for the front . part #v28-005zA look it up bud
Antwort 10/04/2019tomaton no hay disponibles para el k969 sin hacer ninguna modificacion
Antwort 07/01/2020juanjon For drift you need straight diff, glue it up, that's what I did, heat it up to loosen glue and you're original again.
Antwort 20/03/2020juanjon For drifting you need straight shaft, glue it up, you can always heat it up and loosen the glue.
Antwort 20/03/2020juanjon glue it
Antwort 20/03/2020eojyam78 all you have to do is cut a small peice of cardboard to the inner diameter of the diff housing and set it on top of the small gears inside the diff. doing it this way allows you to unlock it with the reverse process ie take the card board out if you glue it its permanent
Antwort 09/08/2020Unser Unternehmen | Kontaktieren Sie uns | Zahlung & Versand | Partnerschaft-Programme |
---|---|---|---|