USB Li-ion Akku-Ladegerätemodul Board Upgrade Version 3.2V/3.7V/4.2V mit geschützter Funktion Bewertungen

USB Li-ion Akku-Ladegerätemodul Board Upgrade Version 3.2V/3.7V/4.2V mit geschützter Funktion

US$5.99
~~US$7.99~~
Jetzt Kaufen

Kundenbewertungen

4.96 aus 5

5 sterne
89 (95.7%)
4 sterne
4 (4.3%)
3 sterne
0 (0%)
2 sterne
0 (0%)
1 sterne
0 (0%)

Eine Bewertung schreiben Erhalten Sie doppelte Banggood-Punkte, wenn die von Ihnen vefasste Bewertung in den ersten drei Bewertungen liegt.

Alle Bewertungen (93)
Bild (12)
Video (0)
Alle Sterne
- Alle Sterne(93)
- 5 Sterne(89)
- 4 Sterne(4)
- 3 Sterne(0)
- 2 Sterne(0)
- 1 Sterne(0)

Sortiere durch:

Zur Vorschau

Zur Vorschau
Am hilfreichsten
Die letzten

Bewertungen nur aus Ihrem Land (Germany)

Original zeigen

Ein Teil der Rezension wurde automatisch übersetzt.

bodoo69VIP3
RO
23/07/2018

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged
3

Kommentar

Original zeigen
SbvosetaVIP1
IN
20/07/2019

Good

Good

Good
1

Kommentar

Original zeigen