Kundenbewertungen

Eine Bewertung schreiben
  • Alle Bewertungen (457)
  • Bild (85)
  • Video (1)
  • Alle Sterne
    • Alle Sterne(457)
    • 5 Sterne(417)
    • 4 Sterne(26)
    • 3 Sterne(11)
    • 2 Sterne(2)
    • 1 Sterne(1)
Sortiere durch:
Zur Vorschau
  • Zur Vorschau
  • Am hilfreichsten
  • Die letzten
Bewertungen nur aus Ihrem Land (Germany)
|
Original zeigen

Ein Teil der Rezension wurde automatisch übersetzt.

  • 17/01/2017

    I ordered this chassis as 1:1 replacement for the stock one of my A959. It looks good and solid so I try to rebuild my A959 on this chassis. This will not work out out of the box there is some rework needed or you need to buy more update parts. Here are some issue I had: The major issue is the the drilled holes for rod mount the suspension arms is about 1mm to low. The result is that the stock (plastic) suspension arms will no longer fit. It seems that the full metal updates fit this situation (I ordered them but still backordered so I can't fully prove) but you than will have a asymmetric mounted suspension... I don't like it. Second issue I found is that the chassis is about 1mm shorter than the stock one so your main shaft is to long. So you likely will have to shorten yours or you will hear stage noise from the differentials. Additionally the cover plate for the shaft will not fit perfectly. Third minor issue: The mount for the servo is to high this time you have 1mm space between the servo and the chassis. While steering the servo motor is moving up and down and make some clicking noise. Fourth minor issue: There is not enough space mount the controls unit (ESC and receiver). As I plan to upgrade the car to Brushless motor I didn't care about this fact. Anyway you will have to find a solution. Sixth issue this one should be mentioned as well: The pins for mounting the steering linkage are - again - a little bit sort. As the mounting sockets that comes with the cassis are not fixed it may happen that the pins lost track and steering is badly influenced. Either you need to fix the sockets on chassis or try to get longer pins. Some other things I found but not treat as an issue: The dust cover for the reduction gear and the motor do not fit. Even with cover you have always some dust and sand that will get into the gears so if you keep it open it's much faster and easier to to clean it. I had updated my one with steel gears so they will last a little bit longer. Summery: This is a really nice looking stable and massiv chassis that will add some extra weight to you car. The weight is good as you will have a more "grounded" car which will advance the handling. On the other hand do not expect that you can replace the chassis 1:1 there is a lot of rework that needs to be done. To solve most of the stuff I designed some extra parts for 3D printing e.g. to level the suspension mounting and the diffs. I may post them when finished.

    Kommentar (1)
    Original zeigen
  • 23/08/2019

    URUAV frame, not JINGXI like pictures

    Kommentar
    Original zeigen
  • 12/10/2021

    Schönes, schönes Gehäuse 👍😁 Sehr schnell angekommen, wie in der Beschreibung angegeben, ein wirklich schönes Chassis, gut gemacht und gut verpackt, es kam ohne Klopfen oder Mangel an Teilen. Folgen Sie mir auf meinem Sie Röhrenkanal DRRC Stunt, und bald wird es ein Video von der Montage auf dem Modell 👉 https://www.youtube.com/channel/UCYPCHCvorQKBgTh_xUys0Og Ich danke euch allen. Toller Verkäufer, ich empfehle es

    Kommentar
    Original zeigen
  • 06/05/2021

    Wirklich glücklich mit diesem Upgrade, macht das Auto Gefühl viel fester und stabiler. Qualität der es ist wirklich schön, gute Verarbeitung. Ich bin noch nicht gelaufen, aber alles sieht vielversprechend aus. Versandzeit war auch toll! Danke BangGood!!!

    Kommentar
    Original zeigen
  • 15/07/2019

    nice .....good Qualität....

    Kommentar (1)
    Original zeigen
  • 30/10/2016

    Не совподают расстояние по отверстиям( 2мм) на раме с оригиналом. В остольном неплохо.

    Kommentar
    Original zeigen
  • 06/09/2019

    This is URUAV, not JINGXI like photos...

    Kommentar
    Original zeigen
  • 28/03/2019

    Compra recomendada, es 90% compatible /, el único ajuste que se realizó fueron terminar los pre orificios que tiene para las barras de dirección en la placa. Es una compra que recomiendo ampliamente para el wltoys con chassis parecido, ya sea el a959, 969 y 979. Queda bastante bien además de la resistencia que ofrece por el precio WOW! la verdad.

    Kommentar
    Original zeigen
  • 19/03/2019

    if you really now what you are doing the hard work is definitely worth every penny

    Kommentar
    Original zeigen
  • 16/03/2019

    It was more work than i thought. For version B you have to drill 2 holes. -> For the steering. And the gears are free. It´s very good looking and stable.

    Kommentar
    Original zeigen
Show:

    Gesamt 0 Seiten

    Zur Seite gehen

    Sie interessieren sich vielleicht für:

    recommendation for you
    • US$37.99
    • US$6.11
    • US$10.99
    • US$8.79
    • US$12.69
    • US$20.99
    • US$66.98
    • US$8.09
    • US$12.99
    • US$12.99
    • US$5.99
    • US$13.85
    • US$2.99
    • US$13.99
    • US$8.19
    • US$27.09
    • US$38.99
    • US$259.00