The GPS is amazing! I can get satellites in the basement of my 100 year old 3 story home sometimes! Outside, satellites lock quickly and remain rock-solid. Typically 12-14 satellites. The compass orientation took some fussing. When you mount the antenna up (which you should be doing, the compass is flipped. Therefore, be sure to set the compass orientation to FLIP. Further, the orientation is sideways! So, you need to set the compass orientation in your flight controller configurator to "CW 270 Flip" if the wires are towards the back of your craft. If you mount it so the wires are to the front, you need to set the compass orientation to "CW 90 Flip". After this and compass calibration, everything is perfect. I hope this saves some time for someone out there.

The GPS is amazing! I can get satellites in the basement of my 100 year old 3 story home sometimes! Outside, satellites lock quickly and remain rock-solid. Typically 12-14 satellites. The compass orientation took some fussing. When you mount the antenna up (which you should be doing, the compass is flipped. Therefore, be sure to set the compass orientation to FLIP. Further, the orientation is sideways! So, you need to set the compass orientation in your flight controller configurator to "CW 270 Flip" if the wires are towards the back of your craft. If you mount it so the wires are to the front, you need to set the compass orientation to "CW 90 Flip". After this and compass calibration, everything is perfect. I hope this saves some time for someone out there.

The GPS is amazing! I can get satellites in the basement of my 100 year old 3 story home sometimes! Outside, satellites lock quickly and remain rock-solid. Typically 12-14 satellites. The compass orientation took some fussing. When you mount the antenna up (which you should be doing, the compass is flipped. Therefore, be sure to set the compass orientation to FLIP. Further, the orientation is sideways! So, you need to set the compass orientation in your flight controller configurator to "CW 270 Flip" if the wires are towards the back of your craft. If you mount it so the wires are to the front, you need to set the compass orientation to "CW 90 Flip". After this and compass calibration, everything is perfect. I hope this saves some time for someone out there.

Frame - https://goo.gl/ICNxS6 Flight conroller - https://goo.gl/BUQnIO Motor - https://goo.gl/6jALTp ESC - https://goo.gl/9QHM0Q

Frame - https://goo.gl/ICNxS6 Flight conroller - https://goo.gl/BUQnIO Motor - https://goo.gl/6jALTp ESC - https://goo.gl/9QHM0Q

Frame - https://goo.gl/ICNxS6 Flight conroller - https://goo.gl/BUQnIO Motor - https://goo.gl/6jALTp ESC - https://goo.gl/9QHM0Q

Use with my F450 setup and Inav1.7 Flight conroller - https://goo.gl/BUQnIO Motor - https://goo.gl/6jALTp Propeller - https://goo.gl/GTXIIS ESC - https://goo.gl/8Wv3ce

Use with my F450 setup and Inav1.7 Flight conroller - https://goo.gl/BUQnIO Motor - https://goo.gl/6jALTp Propeller - https://goo.gl/GTXIIS ESC - https://goo.gl/8Wv3ce

Use with my F450 setup and Inav1.7 Flight conroller - https://goo.gl/BUQnIO Motor - https://goo.gl/6jALTp Propeller - https://goo.gl/GTXIIS ESC - https://goo.gl/8Wv3ce

I bought this GPS unit to replace my broken CX-20 stock GPS (open-source version). The GPS came securely packed inside a protective bag with foam, together with a cable and an extra socket. No damages in transport. Banggood sent it in one day after placing the order on 14-Mar-2016 and it arrived in Hellas on 28-Mar-2016. Amazing! This GPS fits perfectly in the CX-20 GPS puck (where the compass usually is) and installation is pretty simple: - use the stock GPS cable (6-pins on GPS side, 4 pins on FC side) to connect the CX-20 APM Flight Controller regarding the GPS connection. - to use the built-in compass, with a small screwdriver remove the two middle cables from the stock compass socket and insert them to the empty slots on the 6-pin GPS socket according to the product picture (the SDA and SDL lines). The APM flight controller immediately detected it and I constantly get 16-19 satellites where with the stock the maximum I could get was 9. HDOP is much lower also, usually on 0.8- 1.1 range. I am very pleased with this item and the whole buying experience. The CX-20 works perfect now in Loiter mode and it is the best simple upgrade one can do for this quadcopter. Highly recommended.

I bought this GPS unit to replace my broken CX-20 stock GPS (open-source version). The GPS came securely packed inside a protective bag with foam, together with a cable and an extra socket. No damages in transport. Banggood sent it in one day after placing the order on 14-Mar-2016 and it arrived in Hellas on 28-Mar-2016. Amazing! This GPS fits perfectly in the CX-20 GPS puck (where the compass usually is) and installation is pretty simple: - use the stock GPS cable (6-pins on GPS side, 4 pins on FC side) to connect the CX-20 APM Flight Controller regarding the GPS connection. - to use the built-in compass, with a small screwdriver remove the two middle cables from the stock compass socket and insert them to the empty slots on the 6-pin GPS socket according to the product picture (the SDA and SDL lines). The APM flight controller immediately detected it and I constantly get 16-19 satellites where with the stock the maximum I could get was 9. HDOP is much lower also, usually on 0.8- 1.1 range. I am very pleased with this item and the whole buying experience. The CX-20 works perfect now in Loiter mode and it is the best simple upgrade one can do for this quadcopter. Highly recommended.

I bought this GPS unit to replace my broken CX-20 stock GPS (open-source version). The GPS came securely packed inside a protective bag with foam, together with a cable and an extra socket. No damages in transport. Banggood sent it in one day after placing the order on 14-Mar-2016 and it arrived in Hellas on 28-Mar-2016. Amazing! This GPS fits perfectly in the CX-20 GPS puck (where the compass usually is) and installation is pretty simple: - use the stock GPS cable (6-pins on GPS side, 4 pins on FC side) to connect the CX-20 APM Flight Controller regarding the GPS connection. - to use the built-in compass, with a small screwdriver remove the two middle cables from the stock compass socket and insert them to the empty slots on the 6-pin GPS socket according to the product picture (the SDA and SDL lines). The APM flight controller immediately detected it and I constantly get 16-19 satellites where with the stock the maximum I could get was 9. HDOP is much lower also, usually on 0.8- 1.1 range. I am very pleased with this item and the whole buying experience. The CX-20 works perfect now in Loiter mode and it is the best simple upgrade one can do for this quadcopter. Highly recommended.

Tolles kleines GPS für dein Quad. Habe noch nicht mit ihm geflogen, aber es angeschlossen und scheint gut zu funktionieren. Der erste Boot dauert ein wenig, bis es seine Sats Lager bekommen, aber danach erwirbt es Sats sehr schnell. Magnetometer funktioniert sofort. Bei der Einrichtung GPS in betaflight aktivieren, UBLOX-Protokoll verwenden und die Standard-Baudrate überprüfen. Denken Sie, es war 38400. Wenn Sie es richtig angeschlossen haben, sollte es einfach funktionieren. Der einzige Grund, warum es einen Stern für Qualität verloren ist, weil die Drähte es kommt mit billigen Kunststoff beschichteten Drähten. Dies machen es sehr schwierig, Löt zu Ihrem Flug Controller ohne sie zu schmelzen direkt. Betrachten Sie den Austausch der Drähte mit Silikon beschichtet diejenigen. Ansonsten ist es eine tolle kleine Einheit.

Great little GPS for your quad. Haven't flown with it yet, but connected it up and seems to work well. The first boot takes a little while for it to get its sats bearing, but after that it acquires sats very quickly. Magnetometer works straight away. When setting up, enable GPS in betaflight, use UBLOX protocol and check the default baud rate. Think it was 38400. If you've connected it up right, it should just work. Only reason it lost a star for quality is because the wires it comes with are cheap plastic coated wires. This make it very difficult to direct solder to your flight controller without melting them. Consider replacing the wires with silicone coated ones. Other than that, it's a great little unit.

Tolles kleines GPS für dein Quad. Habe noch nicht mit ihm geflogen, aber es angeschlossen und scheint gut zu funktionieren. Der erste Boot dauert ein wenig, bis es seine Sats Lager bekommen, aber danach erwirbt es Sats sehr schnell. Magnetometer funktioniert sofort. Bei der Einrichtung GPS in betaflight aktivieren, UBLOX-Protokoll verwenden und die Standard-Baudrate überprüfen. Denken Sie, es war 38400. Wenn Sie es richtig angeschlossen haben, sollte es einfach funktionieren. Der einzige Grund, warum es einen Stern für Qualität verloren ist, weil die Drähte es kommt mit billigen Kunststoff beschichteten Drähten. Dies machen es sehr schwierig, Löt zu Ihrem Flug Controller ohne sie zu schmelzen direkt. Betrachten Sie den Austausch der Drähte mit Silikon beschichtet diejenigen. Ansonsten ist es eine tolle kleine Einheit.

angeschlossen (erstmal zum Test), in Betaflight konfiguriert und funktioniert😎 was will man(n) mehr👍🏽 connected, configured in Betaflight and works😎👍🏽 what more do you want🤪

angeschlossen (erstmal zum Test), in Betaflight konfiguriert und funktioniert😎 was will man(n) mehr👍🏽 connected, configured in Betaflight and works😎👍🏽 what more do you want🤪

angeschlossen (erstmal zum Test), in Betaflight konfiguriert und funktioniert😎 was will man(n) mehr👍🏽 connected, configured in Betaflight and works😎👍🏽 what more do you want🤪

As usual, no marking stating which way to point this, would it not be easy to screen print the top? Also, why are the led's always on the side of the board that is pointed down when the GPS is fixed? It would be so much better if the LED's were visible in normal use, However, it is accurate, easy to set up and the Banggood website has good information.

As usual, no marking stating which way to point this, would it not be easy to screen print the top? Also, why are the led's always on the side of the board that is pointed down when the GPS is fixed? It would be so much better if the LED's were visible in normal use, However, it is accurate, easy to set up and the Banggood website has good information.

As usual, no marking stating which way to point this, would it not be easy to screen print the top? Also, why are the led's always on the side of the board that is pointed down when the GPS is fixed? It would be so much better if the LED's were visible in normal use, However, it is accurate, easy to set up and the Banggood website has good information.

used in 4 builds now on omnibus F4 pro with inav

used in 4 builds now on omnibus F4 pro with inav

used in 4 builds now on omnibus F4 pro with inav

Особенности эксплуатации: хорошая чувствительность, сверхбыстрый фикс, в том числе в помещениях, удобная, хоть и не во всем очевидная настройка приема GPS, Glonas и прочих спутников через прогу от Ublox. Внутри M8N Ublox, компас, шим-стабилизатор 3.3В и uart. Максимальная частота обновления данных GPS/Glonas, работающая устойчиво - 5 Гц, скорость порта для гарантированной работы 38400. Слабая микросхема стабилизатора 3.3 В, по току на пределе работает. На одном таком модуле уже поменял на аналог другого производителя, хотя дальше лабораторного стола этот модуль еще не летал. Тем не менее, конкурентов по цене/качеству пока не знаю. По работе компаса замечаний нет, только провода и контакты по шине I2C должны быть без малейшего изъяна. Рекомендую (с учетом возможной необходимости прямых рук).

Особенности эксплуатации: хорошая чувствительность, сверхбыстрый фикс, в том числе в помещениях, удобная, хоть и не во всем очевидная настройка приема GPS, Glonas и прочих спутников через прогу от Ublox. Внутри M8N Ublox, компас, шим-стабилизатор 3.3В и uart. Максимальная частота обновления данных GPS/Glonas, работающая устойчиво - 5 Гц, скорость порта для гарантированной работы 38400. Слабая микросхема стабилизатора 3.3 В, по току на пределе работает. На одном таком модуле уже поменял на аналог другого производителя, хотя дальше лабораторного стола этот модуль еще не летал. Тем не менее, конкурентов по цене/качеству пока не знаю. По работе компаса замечаний нет, только провода и контакты по шине I2C должны быть без малейшего изъяна. Рекомендую (с учетом возможной необходимости прямых рук).

Особенности эксплуатации: хорошая чувствительность, сверхбыстрый фикс, в том числе в помещениях, удобная, хоть и не во всем очевидная настройка приема GPS, Glonas и прочих спутников через прогу от Ublox. Внутри M8N Ublox, компас, шим-стабилизатор 3.3В и uart. Максимальная частота обновления данных GPS/Glonas, работающая устойчиво - 5 Гц, скорость порта для гарантированной работы 38400. Слабая микросхема стабилизатора 3.3 В, по току на пределе работает. На одном таком модуле уже поменял на аналог другого производителя, хотя дальше лабораторного стола этот модуль еще не летал. Тем не менее, конкурентов по цене/качеству пока не знаю. По работе компаса замечаний нет, только провода и контакты по шине I2C должны быть без малейшего изъяна. Рекомендую (с учетом возможной необходимости прямых рук).

La verdad que coge en seguida los satélites e incluso dentro de casa...

La verdad que coge en seguida los satélites e incluso dentro de casa...

La verdad que coge en seguida los satélites e incluso dentro de casa...