Nice laserlenses for focussing laserdiodes, even the high power types. Have tested them with 808/637/520/532/470/445 and 404nM with powers from 5mW to 2.5Watt without problems. The shape of the beam depends of the laser, not of these optics. The short focus catches most energy , so the warming up is no problem. For LD's of high power the use of prisma's can be useful to make the beam more round AFTER the collimarion with this optic. Use safetygoggles and a beamstop wich can handle the power. For burning lasers these optics are usable too but check the focus. The coating of these optict prevent reflection, causes anihilation of the fotons (interference).

Nice laserlenses for focussing laserdiodes, even the high power types. Have tested them with 808/637/520/532/470/445 and 404nM with powers from 5mW to 2.5Watt without problems. The shape of the beam depends of the laser, not of these optics. The short focus catches most energy , so the warming up is no problem. For LD's of high power the use of prisma's can be useful to make the beam more round AFTER the collimarion with this optic. Use safetygoggles and a beamstop wich can handle the power. For burning lasers these optics are usable too but check the focus. The coating of these optict prevent reflection, causes anihilation of the fotons (interference).

Nice laserlenses for focussing laserdiodes, even the high power types. Have tested them with 808/637/520/532/470/445 and 404nM with powers from 5mW to 2.5Watt without problems. The shape of the beam depends of the laser, not of these optics. The short focus catches most energy , so the warming up is no problem. For LD's of high power the use of prisma's can be useful to make the beam more round AFTER the collimarion with this optic. Use safetygoggles and a beamstop wich can handle the power. For burning lasers these optics are usable too but check the focus. The coating of these optict prevent reflection, causes anihilation of the fotons (interference).

This lens significantly improved my 7000mW fixed focus Laser. After removing the original lens which has some silicone on the thread in order to make it fixed I found out that at other focal points of the original lens that the spot became pretty wide the further away the worse it got. After I replaced the original lens(only one single lens in it) with the lens system the ray became for more tighter and and smaller, so it improved the overall performance significantly. No it is able to cut through black foam way less conical than it ha done bevore. However - almost al laser of this kind exhibit a line like focal "point" so, in order to perfectly make it a real focal point it would need an astigmatic lens system!

This lens significantly improved my 7000mW fixed focus Laser. After removing the original lens which has some silicone on the thread in order to make it fixed I found out that at other focal points of the original lens that the spot became pretty wide the further away the worse it got. After I replaced the original lens(only one single lens in it) with the lens system the ray became for more tighter and and smaller, so it improved the overall performance significantly. No it is able to cut through black foam way less conical than it ha done bevore. However - almost al laser of this kind exhibit a line like focal "point" so, in order to perfectly make it a real focal point it would need an astigmatic lens system!

This lens significantly improved my 7000mW fixed focus Laser. After removing the original lens which has some silicone on the thread in order to make it fixed I found out that at other focal points of the original lens that the spot became pretty wide the further away the worse it got. After I replaced the original lens(only one single lens in it) with the lens system the ray became for more tighter and and smaller, so it improved the overall performance significantly. No it is able to cut through black foam way less conical than it ha done bevore. However - almost al laser of this kind exhibit a line like focal "point" so, in order to perfectly make it a real focal point it would need an astigmatic lens system!

جيده لاكن صغيره جدا ولا تفرق عن الاصليه كثيرا

جيده لاكن صغيره جدا ولا تفرق عن الاصليه كثيرا

جيده لاكن صغيره جدا ولا تفرق عن الاصليه كثيرا

j’ai bien reçu la commande mais elle est vide l’enveloppe Il n’y a absolument rien à l’intérieur alors je demande le remboursement de mon article je vous fais parvenir une photo love lope a été percé

j’ai bien reçu la commande mais elle est vide l’enveloppe Il n’y a absolument rien à l’intérieur alors je demande le remboursement de mon article je vous fais parvenir une photo love lope a été percé

j’ai bien reçu la commande mais elle est vide l’enveloppe Il n’y a absolument rien à l’intérieur alors je demande le remboursement de mon article je vous fais parvenir une photo love lope a été percé

hızlı kargo

hızlı kargo

hızlı kargo

Das Paket kam sehr schnell. Das Objektiv ist von guter Qualität. Ich empfehle

Paczka dotarła bardzo szybko. Soczewka jest dobrej jakości . Polecam

Das Paket kam sehr schnell. Das Objektiv ist von guter Qualität. Ich empfehle

petite optique de bonne qualité pour laser bleu. je suis satisfait du produit, je recommande.

petite optique de bonne qualité pour laser bleu. je suis satisfait du produit, je recommande.

petite optique de bonne qualité pour laser bleu. je suis satisfait du produit, je recommande.

Items arrived in excellent condition and in good time. Will buy again. Thanks Banggood.

Items arrived in excellent condition and in good time. Will buy again. Thanks Banggood.

Items arrived in excellent condition and in good time. Will buy again. Thanks Banggood.

Взял взамен штатной оптики на свой лазерный гравер 2500 мВт. Фокусирует немного лучше, но неудобно крутить, из-за малых размеров. И, так же как и штатную оптику, приходится подматывать фум-лентой, чтоб убрать болтанку по резьбе, обеспечить плавный ход и некоторую фиксацию после фокусировки.

Взял взамен штатной оптики на свой лазерный гравер 2500 мВт. Фокусирует немного лучше, но неудобно крутить, из-за малых размеров. И, так же как и штатную оптику, приходится подматывать фум-лентой, чтоб убрать болтанку по резьбе, обеспечить плавный ход и некоторую фиксацию после фокусировки.

Взял взамен штатной оптики на свой лазерный гравер 2500 мВт. Фокусирует немного лучше, но неудобно крутить, из-за малых размеров. И, так же как и штатную оптику, приходится подматывать фум-лентой, чтоб убрать болтанку по резьбе, обеспечить плавный ход и некоторую фиксацию после фокусировки.

Arbeit genau wie beschrieben schnell ankommen

work exactly as described quick to arrive

Arbeit genau wie beschrieben schnell ankommen