This printer is far from good in its delivered format. It can not heat the bed over 60C (or even to 60C) without waiting ages. You can not reach 100C with the power supply delivered. Also the belt guides are ridigulously bad quality and the washers being used are just plain stupid. But it is possible to get a print out of this printer if you a) update a power supply and use a mosfet (i had to use 1000W power supply from BG (https://www.banggood.com/24V-40A-1000W-Switch-Power-Supply-Driver-AC110220V-Regulated-Switching-Power-Supply-for-LED-Strip-p-1323748.html?rmmds=myorder) and the bed peak draws ¶~550W, needed to fix the guides and added a titan extruder). Had to invest about 100$ more to get a decent print out from this printer. Still the guides needs to be fixed so that the x and y stops skipping (the guides prevents the belts from moving).

This printer is far from good in its delivered format. It can not heat the bed over 60C (or even to 60C) without waiting ages. You can not reach 100C with the power supply delivered. Also the belt guides are ridigulously bad quality and the washers being used are just plain stupid. But it is possible to get a print out of this printer if you a) update a power supply and use a mosfet (i had to use 1000W power supply from BG (https://www.banggood.com/24V-40A-1000W-Switch-Power-Supply-Driver-AC110220V-Regulated-Switching-Power-Supply-for-LED-Strip-p-1323748.html?rmmds=myorder) and the bed peak draws ¶~550W, needed to fix the guides and added a titan extruder). Had to invest about 100$ more to get a decent print out from this printer. Still the guides needs to be fixed so that the x and y stops skipping (the guides prevents the belts from moving).

This printer is far from good in its delivered format. It can not heat the bed over 60C (or even to 60C) without waiting ages. You can not reach 100C with the power supply delivered. Also the belt guides are ridigulously bad quality and the washers being used are just plain stupid. But it is possible to get a print out of this printer if you a) update a power supply and use a mosfet (i had to use 1000W power supply from BG (https://www.banggood.com/24V-40A-1000W-Switch-Power-Supply-Driver-AC110220V-Regulated-Switching-Power-Supply-for-LED-Strip-p-1323748.html?rmmds=myorder) and the bed peak draws ¶~550W, needed to fix the guides and added a titan extruder). Had to invest about 100$ more to get a decent print out from this printer. Still the guides needs to be fixed so that the x and y stops skipping (the guides prevents the belts from moving).

Chegou alguns dias antes do prezo, apenas a embalagem é um pouco frágil para o peso e o tamanho do produto, chegou bem amassada, mas o produto parece estar em ordem, veremos na montagem.

Chegou alguns dias antes do prezo, apenas a embalagem é um pouco frágil para o peso e o tamanho do produto, chegou bem amassada, mas o produto parece estar em ordem, veremos na montagem.

Chegou alguns dias antes do prezo, apenas a embalagem é um pouco frágil para o peso e o tamanho do produto, chegou bem amassada, mas o produto parece estar em ordem, veremos na montagem.

This new version is even better than the previous versions. More metal parts and better touchscreen. Also the pulleys are actual pulleys now and not skate bearings between washers. There are a few things that are still odd and should be changed. The pulley alignment really needs to be improved, to many skewed angles going into the hotend head. The extruder has to be one of the worst made Titan clones I have ever seen. Also changing out all the screws to socket head would make them easier to tighten without fear of rounding the Phillips head. I would also include washers for most of the screws. With such a heavy bed, moving to 10 mm optical rails and a 10 mm lead screw would be a good thing.

This new version is even better than the previous versions. More metal parts and better touchscreen. Also the pulleys are actual pulleys now and not skate bearings between washers. There are a few things that are still odd and should be changed. The pulley alignment really needs to be improved, to many skewed angles going into the hotend head. The extruder has to be one of the worst made Titan clones I have ever seen. Also changing out all the screws to socket head would make them easier to tighten without fear of rounding the Phillips head. I would also include washers for most of the screws. With such a heavy bed, moving to 10 mm optical rails and a 10 mm lead screw would be a good thing.

This new version is even better than the previous versions. More metal parts and better touchscreen. Also the pulleys are actual pulleys now and not skate bearings between washers. There are a few things that are still odd and should be changed. The pulley alignment really needs to be improved, to many skewed angles going into the hotend head. The extruder has to be one of the worst made Titan clones I have ever seen. Also changing out all the screws to socket head would make them easier to tighten without fear of rounding the Phillips head. I would also include washers for most of the screws. With such a heavy bed, moving to 10 mm optical rails and a 10 mm lead screw would be a good thing.

Ich habe einen (ich würde es nennen) X5SA-400 ohne Bett-Füllstandsensor erhalten. Ich habe gerade einen 12€ -Sensor (LJC12A3 -5-Z/BX) bestellt und es funktioniert. ich habe ein Lüftergehäuse auf mein mpsm gedruckt... habe das x5 nicht im oem Zustand getestet... jetzt funktioniert es wie erwartet. bisher keine Probleme (4 Monate)

i received a (i´d call it) X5SA-400 without the bed level sensor. i just ordered a 12€ sensor ( LJC12A3-5-Z/BX) and made it work. i printed a fan shroud on my mpsm... did not test the x5 in oem state... now it works as expected. no trouble so far (4 months)

Ich habe einen (ich würde es nennen) X5SA-400 ohne Bett-Füllstandsensor erhalten. Ich habe gerade einen 12€ -Sensor (LJC12A3 -5-Z/BX) bestellt und es funktioniert. ich habe ein Lüftergehäuse auf mein mpsm gedruckt... habe das x5 nicht im oem Zustand getestet... jetzt funktioniert es wie erwartet. bisher keine Probleme (4 Monate)

Dear Banggood , I can't print flexible filaments with this printer, it is hanging extruder and step motor. i paid full amount , i can't use it . please healp me

Dear Banggood , I can't print flexible filaments with this printer, it is hanging extruder and step motor. i paid full amount , i can't use it . please healp me

Dear Banggood , I can't print flexible filaments with this printer, it is hanging extruder and step motor. i paid full amount , i can't use it . please healp me

Schneller Versand 4-5 Tag. Dieses Produkt ist gut. THX!

Fast shipping 4-5 day. This product is good. THX!

Schneller Versand 4-5 Tag. Dieses Produkt ist gut. THX!

difícil montar. porém ótimo produto.

difícil montar. porém ótimo produto.

difícil montar. porém ótimo produto.

This printer is awful. It came with absolutely no instructions what so ever and the bed is totally warped which makes it useless. If you use glass over the top you will have uneven heating and possibly bend or break the glass. The extruder motor is also faulty. The printer was also supplied with some 3d printed parts which I would not expect from a printer kit of this value. The only good thing about is all the revised parts from all of the other versions of it like the X5S etc.

This printer is awful. It came with absolutely no instructions what so ever and the bed is totally warped which makes it useless. If you use glass over the top you will have uneven heating and possibly bend or break the glass. The extruder motor is also faulty. The printer was also supplied with some 3d printed parts which I would not expect from a printer kit of this value. The only good thing about is all the revised parts from all of the other versions of it like the X5S etc.

This printer is awful. It came with absolutely no instructions what so ever and the bed is totally warped which makes it useless. If you use glass over the top you will have uneven heating and possibly bend or break the glass. The extruder motor is also faulty. The printer was also supplied with some 3d printed parts which I would not expect from a printer kit of this value. The only good thing about is all the revised parts from all of the other versions of it like the X5S etc.

Plan d'assemblage pas claire environs 10H00 pour monter la machine, impossible de connecter au PC imprimante non trouve pas de drivers compatibles ou prise USB mal connectée ou boitier défectueux.

Plan d'assemblage pas claire environs 10H00 pour monter la machine, impossible de connecter au PC imprimante non trouve pas de drivers compatibles ou prise USB mal connectée ou boitier défectueux.

Plan d'assemblage pas claire environs 10H00 pour monter la machine, impossible de connecter au PC imprimante non trouve pas de drivers compatibles ou prise USB mal connectée ou boitier défectueux.

Produkte wie beschrieben.

produits conformes à la description.

Produkte wie beschrieben.