Sky Sprite F3D-1000 1000mm Spannweite EPO 15E 3D Acrobatic RC Flugzeug PNP
Ein Teil der Rezension wurde automatisch übersetzt.
Short Summary: Overall good value for money! Likes: Good quality ESC (Hobbywing Skywalker 40A) Nice design, all foam parts fit together well. Metal gear servos Good quality control horns and ball links Light weight Glue provided in kit Prop included Issues: No manual provided in box. Though it is pretty straight forward. Unknown wattage of motor (I am guessing 28A- 30A based on size) so be careful on prop size. Screws: The long M2 screws are used for the wing joiner and wheel axles. The short M2 screws are used for the ball links The long coarse thread screws are used for the ailerons and rudder horns The medium coarse thread screws are used for the elevator horns The short coarse thread screws are used for the landing gear legs. The push-rods in my kit were to short for the ailerons ( this was because the servo was put in the wrong way with the horn towards the front instead of towards the back) and the rudder push-rod was not threaded so that I could not thread the ball link on to it. So expect to make your own push-rods. The control horn on the elevator needs a bit of adjustment before it will fit over the carbon strip (I used a hacksaw blade to widen the slot). The landing gear legs need a bit of adjustment (sanding) to get the holes lined up before you can install the small screws. Cheers.
mr. mevr. De vleugels van het vliegtuig zijn beschadigd tijdens een douane controle. groeten Luc Winters
Die Qualität der Verarbeitung ist recht gut. Das Modell hat nur geringe Schäden an Handhabung und Lagerung. Das Preis-Leistungs-Verhältnis beim Kauf mit Rabatt ist sehr gut.
hallo. die Qualität ist ok für den Preis. das Fahrwerk hat eine schlechte Verbindung mit dem Körper. Sie können dies leicht beheben, wie ich es tat. siehe meine Bilder... viel Glück
the kit fits perfect together and it is easy to build. no manual in the box. CG is 5mm in front of the aileron cable. the provided 2836 100kV Motor is getteing hot with a 11x5.5 Prop and draws 12A on 3s. So i replaced it with a 3536 1000kV. this one draws 24A with the same prop and brings the double thrust.... not getting hot. i use 2200mah 3s. flies good for all figures... even looop in knife edge position is possible..
disappointing There is a dent in the wing
The plane glue well stable. It could do with more power I.e. The 4s option
Sehr gut Sky Sprite F3D 3D Flugzeug PNP. Dank
Noch nicht fliegen, schöne Maschine, schnell und unbeschädigt geliefert.
kam in ein paar tagen in italien pack integriert keine schäden. das flugzeug fliegt gut für die 3d groß zu lernen gesehen den niedrigen preis. Dank Bangood