RF-Power8000 1Mhz-8000Mhz OLED RF Leistungsmesser -55dBm ~ -5dBm Einstellbarer Dämpfungswert
Ein Teil der Rezension wurde automatisch übersetzt.
Don't forget to purchase a 2W 30dB (1000 divider) attenuator to get a direct dBm display. Mine came with a +0.3dB offset so I assume it was calibrated at the factory. I tested it with various VTX 5.8GHz transmitters and the power is very accurate, I also tried to insert a set of attenuators and got a very precise value, within +/- 0.1dB range. Very convenient to check the output power or measure the attenuation on cables and SMA connectors, I don't regret my purchase.
Surprising accuracy. A fraction of the cost of another brand but readings are the same. Very happy with this power meter.
A good and easy way to measure with this power meter. And most importantly, you get a good device for reasonable money. I did not regret what I bought. Even put the USB cable. I'm satisfied.
Fitted a 30db attenuator to measure FPV VTX modules and it seems to do the job fine.
Misst etwas, es könnte sogar ganz OK sein (Werte machen einen Sinn beim Überprüfen der TX-Leistung). Aber das Problem ist: die eingestellte Frequenz ist nicht bandbreitenmäßig, sieht aus wie eine Obergrenze der Frequenz des LP-Filters, da mehr ich setze, wird ein größerer Wert gemessen. Auch Instruktionen sind nicht vorhanden, so im Grunde habe ich keine Ahnung, ob ich das Problem selbst beheben könnte. Auf der guten Seite kann es verwendet werden, um Antennen zu vergleichen und TX-Einstellungen in Bezug auf die Ausgangsleistung zu überprüfen.
Аналог ImmersionRC. Измеряет уровень РЧ сигнала. Настройками задается верхняя граница частоты измеряемого сигнала и ослабление.
ok
Works ok
nice unit!
A good and easy way to measure with this power meter. And most importantly, you get a good device for reasonable money. I did not regret what I bought. Even put the USB cable. I'm satisfied.