Eine Bewertung schreiben
  • Alle Bewertungen (20)
  • Bild (3)
  • Video (0)
  • Alle Sterne
    • Alle Sterne(20)
    • 5 Sterne(16)
    • 4 Sterne(3)
    • 3 Sterne(0)
    • 2 Sterne(0)
    • 1 Sterne(1)
Sortiere durch:
Zur Vorschau
  • Zur Vorschau
  • Am hilfreichsten
  • Die letzten
Bewertungen nur aus Ihrem Land (Germany)
Original zeigen

Ein Teil der Rezension wurde automatisch übersetzt.

  • 13/12/2019

    This is not a "normal" winch-controller. Important parts are missing in the description - and of course it does not come with a manual. Comes really nicely packed in a plastic box, does have a PH2.0 plug ("mCPx") for plugging in a winch or motor. I needed quite a lot of time to work out how this winch controller works. It does not work as a "normal" speedcontroller works. You will plug the winch controller directly to the receiver. But you cannot go forwards, backwards (and change speed), if you plug it to channel 2 (ESC channel) Every time, the winch controller gets a signal from the receiver/transmitter, it changes the direction of the motor/winch turn and runs slowly. Next "signal" is stop. Next signal is "run other direction". This has some advantages and some disadvantages, but I think, Banggood or RBR/C should tell us with a manual, how this winch controller works! It means: You can use this winch controller with a simple push button on your transmitter, as many transmitters do have (on the handle) and most people use for switching on/off lights. No 3-position switch is needed to control this winch controller, a push button does the job! This is a big advantage for people using a simple 3-channel transmitter with ch-3 controlled by a push button. They can control a winch now using this controller! But if you have a tx with 3-position switch, you cannot use this winch controller as you were used to with "normal ESCs" - pushing the switch to one direction - winch will go to this direction, center is stop, pushing to the other direction, winch will go to the other direction. This winch controller will work with such a switch, but it will change motor direction every time you push it, no matter, in which direction. So it is always - direction 1 - stop - direction 2 - stop - direction 1 - stop - direction 2 - stop... and so on. Nice: powerd by receiver. Check out BG 1533777 for a rx powered ESC which works perfectly as winch controller.

    Original zeigen
  • 21/11/2019

    Works awesomely! Its the perfect tool to get past the GT3C ch3 problem. Hit the button once, it feeds the line out, hit again, it stops, hit again, it pulls the line back, then stops when you hit it again. Cycles through it perfectly. Cannot be easier!

    Original zeigen
  • 15/02/2020

    Coole und bequeme Sache.

    Original zeigen
  • 30/05/2022

    funktioniert perfekt mit Controller sehr gut.

    Original zeigen
  • 18/11/2021

    alles okay gerne wieder

    Original zeigen
  • 16/01/2020

    Arbeitet mit Flysky GT2B Remote-Kanal 3 Presse Botton. Drücken Sie 1 Winde gehen aus, drücken Sie 2 Winde stoppen, drücken Sie 3 Winde gehen in und drücken Sie 4 Winde stoppen. Nizza einfach Plug and Play Winde Controller. Installiert im mitgelieferten Karton aber nicht wasserdicht, nur spritzwassergeschützt. Sehr zufrieden.

    Original zeigen
  • 03/03/2020

    Ist schon gut.

    Original zeigen
  • 04/05/2021


    Original zeigen
  • 28/12/2020

    Schnelle Lieferung

    Original zeigen
  • 11/12/2020

    sieht ok noch nicht getestet

    Original zeigen

    Gesamt 0 Seiten

    Zur Seite gehen

    Sie interessieren sich vielleicht für:

    recommendation for you
    • US$36.95
    • US$9.99
    • US$8.09
    • US$13.85
    • US$20.78
    • US$37.09
    • US$93.54
    • US$59.99
    • US$8.09
    • US$65.82
    • US$15.00
    • US$50.99
    • US$6.89
    • US$48.99
    • US$18.47
    • US$148.99
    • US$449.99
    • US$9.23